My eyes are being transformed Build and then some!

[Team Aero-K]

Finally after a 1 month wait, I received my new eyes......
Thank you Super Made for shipping it out through DrivingSPORTS and thank you K-San!
The car will look slightly different on September 28s drift showoff!!!
No more having no front end....will put it back together
http://i249.photobucket.com/albums/gg231/aerokgarage/IMG_7071.jpg
with these........
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1178.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1179.jpg
Car will look exactly how the headlights on the actual supermade S13 coupe are...same style bulbs and lights
http://i249.photobucket.com/albums/gg231/aerokgarage/post-4608-1198411990.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/smsdmax180.jpg
Then I have my Uras low mount Carbong GT wing to install on the car
http://i249.photobucket.com/albums/gg231/aerokgarage/uras_3dRearWing_Low.jpg
After that, will be on some new 5 luggers, converting to 5 lug to rock some new babies we will have
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI0106.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI0107.jpg
and these...
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI0178.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI0179.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI0180.jpg

Taking alot of the graphics off the car, and making look like a street driven 240sx baller style!


ALRIGHTY THEN.........
Finally after working my ass off at Tires Plus putting in overtime, I finally decided to get my lazy ass motivated...I decided to drive my broke ass car down to Aero K to start the transformation.
Here is a picture of the car right after I pulled it into the shop
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1245.jpg
little better lighting for you guys
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1247.jpg
I had purchased Super Made headlights for my car due to the fact that I need headlights...lol but didn't have the money to buy the lighting system which will be affiliated with the headlight transformation.
I picked up these fog lights hoping they would make a good match and they did, don't you all think?
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1253.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1254.jpg
And promoting Ying Ling with the build....lol
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1256.jpg
The car had participated for Nopi Drift Rnd 3 at Englishtown, NJ but ended up having a nice faculty meeting with the wall twice, but no major frame damage just cosmetic and these is where it stands before I touched anything
As you can see, both sides of the Radiator support was damaged but not so major where I had to cut and weld a new one, I can make this work and save a few bucks.
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1248.jpg[/IMG
[IMG]http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1249.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1250.jpg
a nice little top shot of the engine bay before i started wacking stuff out.
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1251.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1252.jpg
A few extra shots of around the car before I went to work cause i was enjoying drinking my Ying Ling
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1257.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1258.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1259.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1260.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1263.jpg
Before work progressed in ripping stuff off
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1261.jpg
The car also had a nasty boost leak where it wouldn't boost over 3 psi. I decided to fix the front end of the car first before i started pressure testing and this is what i found after ripping the front end off
A new HKS sequential BV type 2
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1269.jpg
Seal busted causing me to loose all psi of boost due to the BV staying wide open at all times
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1267.jpg
After ripping Front Mount and Radiator off to start banging and hammering away
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1264.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1265.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1266.jpg
I also decided to relocate the oil cooler because it just wasn't fit at the right mounting point where i had it
Some close up pictures of what i have to fix and straighten out before installing the Super Made headlight conversion
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1271.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1272.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1273.jpg
I started moving around my body harness to start hammering away and to my surprise i was covered in ants all over my arms....I was like WTF!!!!! I look down and my body harness had an ant farm that had built their empire in my harness, both of my arms were covered in ants.
The picture below, point out all the little brown spots and those *uckers were everywhere once i touched the body harness
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1277.jpg
After a 30 mins of hard banging and hammering away, this is what the right side looks like now
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1278.jpg
I was able to straighten it up as much as possible, not to bad
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1281.jpg
The left side had the most nastiest crease in their but was able to even it out and here is how it looks now
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1280.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1279.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1281.jpg
Installed both new front headlight and radiator support beams(OEM of course)
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1282.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1283.jpg
Got pretty tired, it was around 12:30am I decided to stop and put the fender on to see how it looks and here it is
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1284.jpg

Tonight will go done to the shop again and try to start mounting the headlight conversion onto the car....please stay in tuned for the next step of build pics.
Ill tell ya what, the car came out pretty nice after straighting up the front as much as possible!
Stay tuned for further updates

[SlideWell]

my eyes hurt now. i think its the festival of colors goin on...hope ya get it all sorted.

[driftedfc3s]

I think I can see Ryan in the back of the shop. Must be hiding his pot smoking from my mom.

Looks good, dude. You better be coming up soon.

[Team Aero-K]

haha....i said the same shit today when i was uploading the pics.
From banging and hammering the black paint chipped and the red beneath started to show and then everything else makes it a brain fart.

I will be painting everything soon once i get the headlights situated and bolted on

[azndoc]

Why is the top part of the bracket thing all bent up looking?
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1253.jpg

[Team Aero-K]

I think I can see Ryan in the back of the shop. Must be hiding his pot smoking from my mom.

Looks good, dude. You better be coming up soon.

you miss him dontchya...lol he wasn't at the shop, I couldn't even spot a single human being in the background other than the mysterious hand holding up the Ying Ling

[Team Aero-K]

Why is the top part of the bracket thing all bent up looking?
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1253.jpg


lol....see why I hate florida, those top covers for the headlights were in my truck for two days and at 95+ temps here in florida the FRP started to curl upward....just gotta put a heat gun to it and straighten it up again.

But I am riveting that part with small rivets

[LongGrain]

Why is the top part of the bracket thing all bent up looking?
[IMG]http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1253.jpg[IMG]

i was wondering the same thing, those look beat.

[Team Aero-K]

^ the heat man the heat sucks here in FL....its like a microwave constantly popping popcorn...ill tell ya, you cook here!

[SC_S13]

nice job, i wish my rad support only needed some hammering, i have to replace the whole damn thing! whats the spec on those wheels? Give me a good price if you sell them haha

[clark]

lol....see why I hate florida, those top covers for the headlights were in my truck for two days and at 95+ temps here in florida the FRP started to curl upward....just gotta put a heat gun to it and straighten it up again.

But I am riveting that part with small rivets

so how is that not going to happen when they're outside in the sun?

[yota man]

^^^ I was about to say the same thing^^^ If you want to sell those wheels and tires I might be willing to take a trip down to florida.

[projectRDM]

so how is that not going to happen when they're outside in the sun?

My thoughts exactly. That shit looks retarded IMO, and I'm betting light output at night (if you even drive at night, I don't know what you drift kids do after the sun goes down) is going to blow ass.

[singlecamslam]

damn your radiator support went through hella and back.

[J ROK]

Once the bendy part is riveted on, it will be very straight. It's thin, but very sturdy.

those lights may look small, but they are blinding! we tested them out and I was seeing white spots after that. And they shoot far.

[Team Aero-K]

I do have a plan of action....lol

I am thinking about re-inforcing them with a thin sheet of sheet metal and then riveting them onto the headlight itself.

The car will be garage kept and will only be driven during events so i am not to worried.

I ended up going to my friends studio and listen to them freestyle tonight with a whole lotta beer. But tomorrow night will be a night at the shop.

Check them out

MySpace.com - Seasons Lost - Coral Springs, Florida - Rock / Metal / Progressive - www.myspace.com/seasonslost (http://www.myspace.com/Seasonslost)

[pink godzila]

Here... got this set up long time ago.. big paint on fitting on bucket also the cover!!

You should just buy PIAA-3000

HERE.. front bumper are taking off this weekend and putting BN Sport

http://i37.photobucket.com/albums/e89/pl91741/DSC00170.jpg

[240trainee]

Gonna look ill dude!!!

[Style]

i thought you said you were goin to have the exact same bulbs and everything like supermade... you have 30mm fenders in the back molded?? i dont see no rivets.. ish looks clean.

[ROUGE180]

I started moving around my body harness to start hammering away and to my surprise i was covered in ants all over my arms....I was like WTF!!!!! I look down and my body harness had an ant farm that had built their empire in my harness, both of my arms were covered in ants.
The picture below, point out all the little brown spots and those *uckers were everywhere once i touched the body harness


OMG. I new I was not the only one who found ants living in their car. Mine were living in my fender behind the mud guard. GL with the build. Looks like its going come out great.

[SoSideways]

http://i37.photobucket.com/albums/e89/pl91741/DSC00170.jpg

ZOMG it's that pic again hahahahahahaha

It's like every month that pic finds its way onto at least a thread on these forums.

[Dousan_PG]

jesus christ that car is a piece of shit

get a new chassis.
this is your 'demo' car for aero K too?
or personal car?
its horrible


cool headlights though. i do kidna like them
minus the warped shit.

whats w/ the painted blue intake mani
it looks so retarded. get another one for the love of god.
your engine bay is driving me insane

[steve shadows]

Dousan Midol is really cheap check it out

I know a girl who raves about it, it should work well for you too

[Dousan_PG]

sorry i thought this aero k thing was some business
cant see a shop car looking so shitty.

steves still mad because i wont let him tune my car
hahaha

[steve shadows]

No way Jose.

Enjoy your 200 some od ft lbs...on a dynapack no less...

haha

[240trainee]

Dear sweet Lord Steve

Lay the fuck off.

Your saying you are the God of tuning everytime you post has gotten old.

[pink godzila]

ZOMG it's that pic again hahahahahahaha

It's like every month that pic finds its way onto at least a thread on these forums.

:D I dont take picture at all..

[240cracker]

^
ya for reals
some real haters in here

your car is sick as fuck cant wait to see the finished product. i like thoughs rims best

[Om1kron]

Dear sweet Lord Steve

Lay the fuck off.

Your saying you are the God of tuning everytime you post has gotten old.

Where shall I direct your e-hug man? Why so serious? :wan:

[ScottMan]

What are the specs on the SP1s?
Dear sweet Lord Steve

Lay the fuck off.

Your saying you are the God of tuning everytime you post has gotten old.
Haha seriously...I don't know the guy at all but he barely posts without talking about how awesome of a tuner he is and how everyone else is doing it wrong. Awesome...

[s13drob]

^^^ hahaha... tag teaming.

to aero K that front end accident could of been your brand new super mades. i can imagine how much that would of sucked. GL i love the super made look.

[Team Aero-K]

hahaha....oh man I had a good laugh, coming home from Tires Plus selling tires, oil changes, Belts, flush and blah blah blah, I was thinking to myself that I was definitely gonna have some funny responds on the thread here. You guys made me laugh good, I needed it. Long day!

Yes the car is a piece of shit but it what it is at the moment. Shit is crappy with the economy and i still decide to spend money on her. Ill tell you what, Im sure you guys are aware of Team Burst. His car is beat to shit but beautiful and sexy and ohhhhh so smooth.....but still runs it. I KNOW MY CAR ISN'T TEAM BURST. But I do like to change things around...


----
Candy Apple Red
SSR Professor SP1s 17X10 +5 17X12 -10
Works9 bodykit
Super Made styling with a kick


Tonight I decided to go to a titty bar, feel like drinking some Coors Light and handing out dollars, but Tomorrow all day, Sunday All day will be working at Aero K.

It is a shop by the way just not open to the public, will be.

Sept 15th container is here

Grand Opening as a Vendor coming soon!
http://i249.photobucket.com/albums/gg231/aerokgarage/oceanfreightbill.jpg

[AKsamuraiS14]

bump for my brosef....

his car is a peice of shit tho

he cant touch me....

MUAHAHAHAHAHAHAHAHA

[steve shadows]

Where shall I direct your e-hug man? Why so serious? :wan:

seriously haha :naw:

seriously though Dousan loves it, eats it with a spoon :wan:

Tuning GOD?

Thanks never been called that before :yum:

cheers guys

TGIF. I love zilvia....

[FIlthy 24O]

sorry kina off topic but have anyone ever seen these on a coupe i know some guy was selling them and they were on his coupe....but just wanted to see more thank you

[Team Aero-K]

will be taking for build photos today, stay Tuned! =)

[Team Aero-K]

Well....ill tell ya something!
I hate it when my mind goes blank and I forget the SD card for my digi camera, so I pretty much missed an entires days worth of shots.
Although J ROK was their with his gangsta digi cam and took some pictures so their is bunch of crazy shots that are going on around Aero K
Before:
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1248.jpg
After:
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1299.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1300.jpg
full shot:
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1298.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1304.jpg
This is as straight as i could get it, but I am still going to mess with it with some extra touch to see if I can align it just a bit better
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1305.jpg
Can you see the eyes starring at you?????? bwwaahahahahaha
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1301.jpg
Installed the Mid Mount back on to see how straight it sits
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1317.jpg
not to shabby!
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1306.jpg
Now with the radiator in place, it looks pretty good to me, what you all think?
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1320.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1318.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1321.jpg
Test fit to see how it looks.....Still gotta paint them but looks pretty cool! Can't wait for my SSRs:D
http://i257.photobucket.com/albums/hh204/Aero-k/P9140646.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/P9140642.jpg
gotta fix the bumper a bit but will get there soon!
http://i257.photobucket.com/albums/hh204/Aero-k/P9140638.jpg
Our Team mate Ryan's gangsta new wheels made his miata so SEXY!!!!!
http://i257.photobucket.com/albums/hh204/Aero-k/P9140619.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/P9140645.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/P9140644.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/P9140627.jpg
Here is Jose Cuervo's whip....getting spiced up with the works....can't wait to see him finish it, with our extra help, this baby will be on the road in no time!
http://i257.photobucket.com/albums/hh204/Aero-k/P9140652.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/P9140650.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/P9140649.jpg
Jose spent alot of time on this baby!
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1314.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1312.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1313.jpg
Custom made by Mr. Cuervo himself!!!!!!
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1315.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1316.jpg
Our AE Hachi Rocku
Nissan S14 RHD Subframe and steering rack
Toyota Celica Supra Rear End
Nissan S14 SR20DE
Nissan S14 Dash and Cluster
all in the works.........but put aside for now
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1307.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1311.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1310.jpg
And the ALL MIGHTY SUPER MADE VIP EXHAUST!!!!!!!!!!
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1295.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1297.jpg
http://i249.photobucket.com/albums/gg231/aerokgarage/DSCI1296.jpg
and no its not for my car......:(
more pics coming soon......

[JRas]

How much negative camber is that Miata running in the rear?

[Team Aero-K]

How much negative camber is that Miata running in the rear?

its like -48....hahaha, he bought adjustable rear control arms and they also adjust camber like crazy.

He got Demon camber in the rear pretty much but its going on the alignment rack this Friday

[UfoZ8myCow]

we tested them out and I was seeing white spots after that. And they shoot far.

That's what she said.

(I don't know what you drift kids do after the sun goes down)

I ended up going to my friends studio and listen to them freestyle tonight with a whole lotta beer. But tomorrow night will be a night at the shop.

So THAT'S what drift kids do after the sun goes down!

jesus christ that car is a piece of shit

get a new chassis.
this is your 'demo' car for aero K too?
or personal car?
its horrible


cool headlights though. i do kidna like them
minus the warped shit.

whats w/ the painted blue intake mani
it looks so retarded. get another one for the love of god.
your engine bay is driving me insane

Gotta agree... The myriad of colors/wires/ants/shit/warped metal is driving me nuts too looking at these pictures. I like where your head's at but fuck get a new chassis and transfer your shit over or clean this thing up because its ridiculo.

Once its all repainted and SSR'ed and whatnot I might change my opinion.

[Team Aero-K]

Oh boi....thats all i gotta say, will have pics tomorrow =)