ka24de cam questions

[jmpS13]

I have been trying to figure out the best cams to put into my 93 240sx. I read somewhere that the best choice would be to use 1 s13 cam and 1 s14 cam, and that 2 cams from a s14 is no good.

What if you use 2 cams from a 95 ka24de? Can somebody please explain why its not a good choice.

thank you

[whereda40at]

i would like to know too. i have a 98 altima and i want to put cams in that. can i use the same cams that a rwd ka24de uses or do i have to use fwd cams?

sorry im not trying to tread jack.

[racepar1]

The set-up you are referring to is an s-13 kade exhaust cam for your intake cam and an s-14 exhaust cam for your exhaust cam. I have also heard of using two s-13 exhaust cams. This is by far NOT the BEST set-up, just a cheap upgrade. There are numerous write-ups on this. READ them as there is a trick to putting the exhaust cam on the intake side.

[projectRDM]

S13 cams are 240 degree, 248 degree.
S14 cams are both 232 degree.

You make the call. You can also use a thing called google where cam swaps have been discussed since the dawn of the internet.