PDA

View Full Version : CA; zenki s14, built but street legal.


turbocoffin
09-06-2008, 06:44 PM
1995 240sx SE 5-speed. Pearl white- 98,000 miles, CLEAN TITLE. super fun daily/canyon driver
Cold AC, CD, foglights, ABS.

I got the car as an automatic from a lady 6 months ago. I’ve built the car now I just want something else.

Transmission swapped over to 5 speed with the following;

DSS Aluminum driveshaft ABS model.
Fidanza Lightweight flywheel
Brand new clutch
New rear main seal
Factory new OEM clutch pedal
Factory new OEM clutch cylinder
Stainless clutch line
New slave cylinder
OEM throw out bearing
OEM new backing plate
All OEM new interior bezel leather and plastics.
S13 twin cam KA tranny (No speed sensor so its throwing a code, no big deal, I have the sensor it will come with the car)
Fresh good fluids all around.

GP sports coilovers 8&6kg springs currently installed (also have 10&12kg)
R33GTR 17x9 skyline wheels Fm901’s front/Yokahamas rear.
Kick’s 20mil wheel spacers all around.
Kazama tension rods
Battle version tierods/ends w/spacers
Stainless brake lines all around.
Porterfield r4s pads all around
Z32 1/16 master cylinder
Q45 calipers fresh rebuild front
Aluminum Sub-frame spacers
Just aligned (performance specs)
V-LSD
Brand new OEM coolant hoses, water temp bung added.
Greddy 50mm temp gauge (installed temporally in the ash tray spot, Still have ash trey)
Nismo T-stat
Nismo rad-cap
Wesco mini battery & tiedown
AEM cold air intake, CARB sticker
New NKG plug wires, the good blue ones
New Plugs/ cap and rotor
New O2 sensor
Nismo motor mounts
Nismo Tranny mounts
HICAS STEERING RACK quicker steering ratio than normal, RARE!
Polyurethane steering rack bushings
Apexi exhaust (California Noise legal)
3’ catco high flow cat (Will pass sniffer)
DC cermaic header- Uninstalled.
Jim Wolf Tuning ECU.
Kouki s14 rear tail lights.

Perfect dash
Momo Hub (using temporarily from my s13 so the ABS light is blinking- covered with tape)
NRG quick release
Sparco 350MM deep rally wheel
Nismo shift knob
Sparco ultra seat, FIA certified at one point- prolly out of date by now.
Sparco seat rail, One
Sparco seat bracket, have two but only one installed.
Also have stock seats


NO LOWBALLERS, NO TRADES (unless sub 100k m3 or 528i) If you want to haggle but are serious I will CONSIDER taking the easy stuff off (ECU, Wheels/spacers, taillights, seats) Everything that was replaced unless noted is OEM factory. No mickey mouse stuff. This car will drive to NY and back today, extremely reliable and currently my daily driver.

$7000.

more pics later.

Call or PM with questions.
Willem 805 558 1202


http://img.photobucket.com/albums/v680/xburnitallx/s14.jpg

clever240sx
09-06-2008, 08:17 PM
I dont get it? Why wouldnt it be street legal?

rotaryland
09-06-2008, 08:30 PM
I dont get it? Why wouldnt it be street legal?

he said it is street legal..not too clever are ya. :confused:

sLidin'_s13
09-06-2008, 08:37 PM
Stock motor?

makulit054
09-06-2008, 09:14 PM
anymore pics? interior and engine bay shots?

cc4usmc
09-06-2008, 09:26 PM
he said it is street legal..not too clever are ya. :confused:

You're the idiot. The OP stated that.. even thought the car is "built".. that it is street legal. The guy you said wasn't clever doesn't see why the car.. being "built" wouldn't be street legal considering it appears to have a ka. I hope your foot tastes good.

turbocoffin
09-06-2008, 09:53 PM
What the title means is that all the mods have been done so i don't get sweat by the cops anymore (i had a caged SR coupe before i built this one and would get pulled over every week where i live) and 'Built' was referring to the rest of the car, SUS, drivetrain- not the motor unless otherwise noted on the parts breakdown

Again, the motor is a STOCK KA that only has the bolt on's mentioned, it has a new high flow cat so it WILL pass the sniffer. will pass the Db test and will pass a popped hood.

Because I wanted a police proof car, but a car that was still fun- i did every mod i could do to the KA to lighten the driveline (aluminum fly, aluminum DS, peppier ECU.) and make it flickable or stickable- all of which are legal.

---Yes I have more shots but they kinda suck (they look antique because i fucked with the color setting on my cam) I was going to take some legit pics tomorrow in the day light.

Deftec
09-07-2008, 06:05 PM
Interested in an 06 r6 raven?

turbocoffin
09-07-2008, 07:03 PM
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1773.jpg
Paint is a 8.5-9 out of 10. previous owner have it resprayed factory pearl 4 months before I bought it.

http://img.photobucket.com/albums/v680/xburnitallx/DSCN1762.jpg
Pulled the fenders just enough to get a flush fit with a 235 on the r33 rims.

http://img.photobucket.com/albums/v680/xburnitallx/DSCN1769.jpg
bumper paint chip
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1775.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1778.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1779.jpg
kouki rear lights.
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1767.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1795.jpg
Took the carpet out when transporting tires, I think I still have it in storage

http://img.photobucket.com/albums/v680/xburnitallx/DSCN1806.jpg
NEW OEM 5-speed swap stuff.
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1803.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1796.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1797.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1799.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1802.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1816.jpg
Drivers door panel was cracked when I got the car, helocopter taped it as a temp fix and never ended up getting another one.
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1818.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1781.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1783.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1791.jpg
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1793.jpg


Buy my rad restored CT90 too! $1300
http://img.photobucket.com/albums/v680/xburnitallx/DSCN1738.jpg

xptnike
09-07-2008, 09:05 PM
nice car...

turbocoffin
09-08-2008, 08:02 PM
All PM's responded too. Been showing the car but as of right now its still for sale.

Deftec
09-10-2008, 05:42 PM
Yes, no? not interested?

berz
09-10-2008, 07:08 PM
how much for the wheels . if some one lowballs you hit me up on them wheels

turbocoffin
09-11-2008, 10:00 AM
Yes, no? not interested?

Sorry, no im not really looking for a bike, i need the cash, thanks though.

Ill let you know about the wheels, but I'm really trying to sell everything together.


Come on, someone wants a fun car. Let me know.

Brian
09-11-2008, 02:56 PM
300% voucher for a great dude and seller.

:)

MaD1337M3DRiV3r
10-02-2008, 08:36 PM
do you have pictures of the front?