Aftermarket SR dump pipe. CHEAP.

[SHIFT_*grind*]

Unknown brand dump pipe for SR. It fits a little tight going onto the turbo (T28), and I had to hammer it a little on one side to clear the transmission, but it works fine. Plenty of cross-section for great flow, even with the minor hammering.

Most aftermarket elbows have one of the top holes slotted to fit T25/28, this one does not which is why it's tight going on. It goes on fine; a couple minutes with a Dremel and it would be easier.

Skinny O2 bung (M12 x 1.25).

You can see where it was hammered a little on the right side, in this pic:

http://smg.photobucket.com/albums/v245/bigjay00213/100_1027.jpg

Lots of flow:
http://smg.photobucket.com/albums/v245/bigjay00213/100_1028.jpg


$40 shipped. If you're local to Virginia Beach, cheaper.


PM me, I need shit gone.

[SHIFT_*grind*]

It flows, it works, and it's $40 to your door, buy it.

[SHIFT_*grind*]

One mo' 'gain.

[s13.5]

30 shipped?

[SHIFT_*grind*]

It's a $30 dump pipe that I spent $40 to make work ($20 to machine the flanges flat, $20 to weld the O2 bung into the oversized hole), so no.