EvilRB
09-02-2008, 06:43 AM
So I got my beautiful MAE's for sale.
They are VIP styled and look fucken sick and my little Silvia's are my first love so here they are for you guys!!
I would love to see these on a Silvia!!
This is copy of my post on another forum just cause it's easier for me:):
So I bought these off of SikNLow a few months ago and got them fixed, finally picked them up this past weekend.
It cost a pretty penny but I love these rims so it feels good to save some classics!!=)
Long story short was thinking wide body but decided against it and they just don't fit the way I want them to without it.:pat::signdammit:
I'm running a UAS air bag system and they stick out just a little too much for my taste and rub on my fenders with the car dropped all the way down.
SO I don't want to risk accidentally dropping the car and screwing up my fenders.
The rears fit fine but the fronts are what are worrying me.
I love these rims and they look sick so I'm really bummed that they don't work right. If I had coilovers I would just camber and rock them but I don't so....... Up for sale or trade they go.
Info on the rims:
JDM MAE made by Riverside w/ Step Lip!
4 & 5 x114.3 bolt pattern
high disk will clear big calipers
19' x 10 +18 offset
19' X 11 +18 offset
The lips sizes for the front and rears are both 4'.
Front tries are 235/35/19
Rears are 275/30/19
Fronts have good tread left but the rears need to be replaced.
I found that one rear has a crack in it but they only have about 30% tread left anyway.
The other rims are in great condition but do have a few little scratches on them.
They could use a refinishing on the 3 other rims but thats up to you the little blemishes didn't really bother me.
These are rare authentic rims that, to me, are classics especially with the step lip!!!
I'm looking for trades for something 19' or 20' with a bold face type of rim.
Maybe high teens to low 30 offsets depending on the width of the wheel.
Machine finish or diamond cut is preferred.
My car is an 06 M35 Y50 and they need to be able to tuck with the suspension all the way down.
Examples would be like D3S or like Euroline DH's something similar styling
As for price I'm gonna list them at $2400 OBO + shipping.
Here are the basics:
Rim Location: San Gabriel, CA 91776
Pay pal: [email protected] Please add 4%
Number: #626-429-6889
E-mail: [email protected]
AIM: jswljones
I don't have any pictures tonight but here are pictures of the actual rims that I saved off of SikNLow had on his old post.
I'll take pics tomorrow, gotta get my camera back.
I'll also update the info as far as lips size, etc.
I'll be happy to answer any questions that you may have!
Now for the pix!!!
Again these are the actual rims before they were sold to me!
http://i4.photobucket.com/albums/y135/psimotoring/307group-052.jpg
http://i4.photobucket.com/albums/y135/psimotoring/307group-115.jpg
They are VIP styled and look fucken sick and my little Silvia's are my first love so here they are for you guys!!
I would love to see these on a Silvia!!
This is copy of my post on another forum just cause it's easier for me:):
So I bought these off of SikNLow a few months ago and got them fixed, finally picked them up this past weekend.
It cost a pretty penny but I love these rims so it feels good to save some classics!!=)
Long story short was thinking wide body but decided against it and they just don't fit the way I want them to without it.:pat::signdammit:
I'm running a UAS air bag system and they stick out just a little too much for my taste and rub on my fenders with the car dropped all the way down.
SO I don't want to risk accidentally dropping the car and screwing up my fenders.
The rears fit fine but the fronts are what are worrying me.
I love these rims and they look sick so I'm really bummed that they don't work right. If I had coilovers I would just camber and rock them but I don't so....... Up for sale or trade they go.
Info on the rims:
JDM MAE made by Riverside w/ Step Lip!
4 & 5 x114.3 bolt pattern
high disk will clear big calipers
19' x 10 +18 offset
19' X 11 +18 offset
The lips sizes for the front and rears are both 4'.
Front tries are 235/35/19
Rears are 275/30/19
Fronts have good tread left but the rears need to be replaced.
I found that one rear has a crack in it but they only have about 30% tread left anyway.
The other rims are in great condition but do have a few little scratches on them.
They could use a refinishing on the 3 other rims but thats up to you the little blemishes didn't really bother me.
These are rare authentic rims that, to me, are classics especially with the step lip!!!
I'm looking for trades for something 19' or 20' with a bold face type of rim.
Maybe high teens to low 30 offsets depending on the width of the wheel.
Machine finish or diamond cut is preferred.
My car is an 06 M35 Y50 and they need to be able to tuck with the suspension all the way down.
Examples would be like D3S or like Euroline DH's something similar styling
As for price I'm gonna list them at $2400 OBO + shipping.
Here are the basics:
Rim Location: San Gabriel, CA 91776
Pay pal: [email protected] Please add 4%
Number: #626-429-6889
E-mail: [email protected]
AIM: jswljones
I don't have any pictures tonight but here are pictures of the actual rims that I saved off of SikNLow had on his old post.
I'll take pics tomorrow, gotta get my camera back.
I'll also update the info as far as lips size, etc.
I'll be happy to answer any questions that you may have!
Now for the pix!!!
Again these are the actual rims before they were sold to me!
http://i4.photobucket.com/albums/y135/psimotoring/307group-052.jpg
http://i4.photobucket.com/albums/y135/psimotoring/307group-115.jpg