FS. Evo 9 brake setup...

[smg944]

hey, selling my evo 9 braking setup that i was going to use on my 240sx. i have the front calipers, front rotors, rear calipers, rear rotors. i was going to do the full conversion. but at this point i cant. ill let the whole setup go for $600. i will pics up soon. the calipers have some fade on them but thats all. these brakes will be insane. here is a link to the bracket you need for them.

http://zilvia.net/f/advertiser-specials-sales/199162-brake-adaptors-evo-sti-calipers.html

pm or post with any questions.

[FerretsCanDrift]

How much shipped to 08724

[IDriveFords]

Are the rear calipers STI ones or EVO ones b/c I don't think theres an adapter out that allows use of the rear EVO calipers but apparently the STI rears just bolt right up. I'd be interested if theyre evo fronts and sti rears.

[DrftKingIII]

Are the rear calipers STI ones or EVO ones b/c I don't think theres an adapter out that allows use of the rear EVO calipers but apparently the STI rears just bolt right up. I'd be interested if theyre evo fronts and sti rears.
The evo rear calipers do not bolt right up. Only the STI ones with a 3mm spacer.

[mxsx25]

are they sold yet?

[eek]

EVO rear calipers will not bolt on.
STI rear calipers will bolt on if you have a complete z32 rear drum assembly
AND NO YOU DO NOT NEED a 3mm SPACER, all you need is to run the Z32 rear rotor

Front will need the custom bracket, using a EVO rotor. Be aware, that the EVO rotor is 10mm SHORTER than a Z32, so rim clearance can become an issue.

[smg944]

ferretts, sent you a pm.

i still have them... they are evo cailpers and rotors all around. i was personally going to make the rears fit. the sti units fit a bit easier then these. hopefully i can get pics up tonight.

[smg944]

i will split the fronts and rears.

fronts for $450. ill just sell the rear calipers and rotors on ebay or something.

[DrftKingIII]

EVO rear calipers will not bolt on.
STI rear calipers will bolt on if you have a complete z32 rear drum assembly
AND NO YOU DO NOT NEED a 3mm SPACER, all you need is to run the Z32 rear rotor

Front will need the custom bracket, using a EVO rotor. Be aware, that the EVO rotor is 10mm SHORTER than a Z32, so rim clearance can become an issue.
Depending on which rotor you use....

Heres an awesome writeup for whoever gets these.
http://zilvia.net/f/tech-talk/93748-check-out-my-new-big-brakes-anyone-else-do-yet.html

[FerretsCanDrift]

send me ur paypal n lets get this ball rolling

[smg944]

ferrets, sent it over to you by pm you were first in line.

[FerretsCanDrift]

Ain't got no money in da bank...but u do now!!!

[smg944]

lol, fronts sold to ferrets. thanks.