OperationSr20
08-27-2008, 12:47 PM
Name: Ryan
Location: Des Plaines, Illinois 60016
Sale: As-Is.
Shipping: Yes!
Payment: PayPal & Cash Only.
Trades Yes!
Contacts:
~ Post
~ Private Message
~ Text: 1 (224) 361-6074
~ EMail: [email protected]
Ok guys, so this was the first item I bought for my Ka-T Build. I purchased it with the understanding it was a T3/T4 Turbo Manifold and upon receiving it, I found it is only Flanged or T4.
It is a Custom Made Manifold...
~ Log Style Manifold
~ T4 Flanged
~ External Wastegate Flange
~ Extended 1 & 4 Runners
~ High-Temp Black Painted
I was going to contact a Machine Shop and have them Stud the Manifold to occumpany my T3 Turbo, which will work out fine. If you have a T3, I would suggest looking into doing the same, it won't cost much to have 4 Studs put into the Flange. You may also consider drilling, I opted not to. (*Picture can be provided to show fitment of a T3 Flange on the Manifold*) The Extended 1 & 4 Runners will allow your Turbo to spool Faster then a standard Equal Length Manifold. It is also Flanged for an External Wastegate, which is great because if you're looking for a Log Mani w/ External Wastegate you won't have to pay $420.00 + Ship for the Pre-Assembled JGS Manifold. The Manifold came coated in a High-Temp Black Paint, which was done very well, I believe.
You will receive the Manifold exactly how I did, I have not installed the Manifold on a Motorset, I has sat awaiting the rest of my build.
I am seeking $185.00 for the Manifold. LOWERED FROM $250.00!! (Trades listed below.) (Pending Sale 08-29-08)
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/014-2.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/017-1.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/016-2.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/015-2.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/018-1.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/021-1.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/020-1.jpg
I am PayPal verified, and am a reputible member with a review thead available to be looked over, so purchase with confidence. Item is packed and ready to ship!! So I will Ship out same day, if not next day at the latest based on when payment is received, using FedEx Ground and will instantly provide a Tracking Number for your package.
I thank you for taking the time to look over my thread, and happy shopping!!
~Ryan
Trades include, but are not limited to:
~ RevHard or JGS Top Mount T3 Manifold
~ Tial 38mm Wastegate
~ Greddy Front Mount Intercooler Core
~ BuddyClub Spec II Exhaust
~ JGS "DownPipe"
~ AEM Tru Boost Boost Controller (Complete)
~ Smoked Lens, White L.E.D.: STRI X-Line or PROSport Oil Pressure, Oil Temperature, Water Temperature Gauges (60mm prefered, Complete)
~ AEM UEGO Wideband (White Faced, Complete)
~ Black SAFC2 (Complete)
Note: Money may need to be added on your, or my, part to make it an even trade.
Location: Des Plaines, Illinois 60016
Sale: As-Is.
Shipping: Yes!
Payment: PayPal & Cash Only.
Trades Yes!
Contacts:
~ Post
~ Private Message
~ Text: 1 (224) 361-6074
~ EMail: [email protected]
Ok guys, so this was the first item I bought for my Ka-T Build. I purchased it with the understanding it was a T3/T4 Turbo Manifold and upon receiving it, I found it is only Flanged or T4.
It is a Custom Made Manifold...
~ Log Style Manifold
~ T4 Flanged
~ External Wastegate Flange
~ Extended 1 & 4 Runners
~ High-Temp Black Painted
I was going to contact a Machine Shop and have them Stud the Manifold to occumpany my T3 Turbo, which will work out fine. If you have a T3, I would suggest looking into doing the same, it won't cost much to have 4 Studs put into the Flange. You may also consider drilling, I opted not to. (*Picture can be provided to show fitment of a T3 Flange on the Manifold*) The Extended 1 & 4 Runners will allow your Turbo to spool Faster then a standard Equal Length Manifold. It is also Flanged for an External Wastegate, which is great because if you're looking for a Log Mani w/ External Wastegate you won't have to pay $420.00 + Ship for the Pre-Assembled JGS Manifold. The Manifold came coated in a High-Temp Black Paint, which was done very well, I believe.
You will receive the Manifold exactly how I did, I have not installed the Manifold on a Motorset, I has sat awaiting the rest of my build.
I am seeking $185.00 for the Manifold. LOWERED FROM $250.00!! (Trades listed below.) (Pending Sale 08-29-08)
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/014-2.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/017-1.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/016-2.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/015-2.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/018-1.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/021-1.jpg
http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/020-1.jpg
I am PayPal verified, and am a reputible member with a review thead available to be looked over, so purchase with confidence. Item is packed and ready to ship!! So I will Ship out same day, if not next day at the latest based on when payment is received, using FedEx Ground and will instantly provide a Tracking Number for your package.
I thank you for taking the time to look over my thread, and happy shopping!!
~Ryan
Trades include, but are not limited to:
~ RevHard or JGS Top Mount T3 Manifold
~ Tial 38mm Wastegate
~ Greddy Front Mount Intercooler Core
~ BuddyClub Spec II Exhaust
~ JGS "DownPipe"
~ AEM Tru Boost Boost Controller (Complete)
~ Smoked Lens, White L.E.D.: STRI X-Line or PROSport Oil Pressure, Oil Temperature, Water Temperature Gauges (60mm prefered, Complete)
~ AEM UEGO Wideband (White Faced, Complete)
~ Black SAFC2 (Complete)
Note: Money may need to be added on your, or my, part to make it an even trade.