s13 redtop 300hp partout.

[stevejames3]

well im thinking of parting out my 92 s13 w/ redtop. THIS IS NOT A FOR SURE. i want to make sure i have people who want things off it before i start tearing it apart. it has the normal frame rust, i was going to have this local fab guy fix it all up. my uncle and i were gonna paint it. then throw on some more parts. im kinda tight with money so i might just sell everything and wait and build something later, or start a budget build. its a stock motor stock head. and here are a list of the parts that will be getting sold:

anything off a brown/brown 92HB chassis
Z aluminum 26mm brakes(calipers, rotors, pads)
megan coilovers(brand new in box)
r200 dif (a little rusty from sitting in the garage)
aluminum DS

these parts are the ones that are installed or on the car, about 500 miles of my driving on them:

z32 maf
detchwork 555inj
act 2600
aeromotive fpr
greddy airnx intake
greddy 3" dp
3" exhaust (not a mojor brand, sounds pretty nice)
2 enthalpy ecus: 1 SOLD this it the tune http://zilvia.net/f/sale-items/198327-s13-sr20-power-fc-tuned-ecu.html
power fc: SOLD
full motor (will seperate)
tranny
anything on the motor(manifolds water pump ect)
24x12x3 FMIC
autometer temp oil and boost gauges(white face)
hallman BC
greddy type s BOV

also have 2 turbos, and hks gt2510 and a garrett that im not %100 sure what kind. the garrett is in good shape and i have to check the hks out, the hks is what im running right now.

with this setup, the car is FUN. roll raced (40-120) a friend of mine that ran a 12.5 and he got my by about half a fender. should be right around 300 hp

if this get some intrest ill start tearing into it. if i just get lowballed and hassled ill probly just park it and wait till i can afford to do the rest of the work and keep it. any questions can be posted or emailed to [email protected]

*Prices will be set via comparible parts either on here, nico, or ebay.

[boogerlovers]

are both of the ECU's tuned for the set up that your running?

[SoguRacing]

how much for that z32 maf shipped to 92841

[rc1honda]

How much for the brake setup shipped to 60425.

[stevejames3]

are both of the ECU's tuned for the set up that your running?
the only difference is one is tuned for 94 octane and one is 91 octane, but i only have the 94 octane one left. and yes, its tuned for that setup. here is a list of what its tuned for just so you know exact.
http://zilvia.net/f/sale-items/198327-s13-sr20-power-fc-tuned-ecu.html

how much for that z32 maf shipped to 92841 125 shipped? i havent shopped for parts in a long time.

How much for the brake setup shipped to 60425.
400? ill have to check shipping price. where is 60425?

[penco]

How much for the intercooler piping?

[SR2Zero]

Filter for the z32 maf to 29388?

LMK.

[stevejames3]

How much for the intercooler piping?

its not the prettiest piping, but it doesnt leak. if your not looking for show, let me know. its 2.5 hotside, 3 cold.

Filter for the z32 maf to 29388?

LMK.

just the greddy filter? or both maf and filter? just filter 30 shipped.

[HellonFire]

How about the full motor setup shipped to 30315?

Motor,tranny, turbo setup, power fc, etc.

Not exhaust.

Tyler

[newstar31]

how much for the hks turbo shipped to l6y3e2 ontario canada
also how many kms on it, what condition is it in now?
did u buy is new or used
lmk

[lonnied]

What kind of manifold? PM me please.

Thanks

[((sr)) kelly]

how much for the fpr shipped to 27597?

[SR2Zero]

PMED you mate.

[stevejames3]

What kind of manifold? PM me please.
Thanks
stock manifold.


how much for the hks turbo shipped to l6y3e2 ontario canada
also how many kms on it, what condition is it in now?
did u buy is new or used
lmk

i bought it used. milage unknown. it was a good turbo when i was driving the car. i can check it out more(off the car) if your interested. looking to get around 600.

how much for the fpr shipped to 27597?

looking to get about 115 shipped.

[driftthis]

interested in the 1 enthalpy ecu.

what is it tuned for?

how much shipped to 23452?

[stevejames3]

interested in the 1 enthalpy ecu.

what is it tuned for?

how much shipped to 23452?

this is the tune, http://zilvia.net/f/sale-items/198327-s13-sr20-power-fc-tuned-ecu.html

looking for 350 shipped.

[stevejames3]

all pm's replied to.

[stevejames3]

i need to sell this stuff.

[Black Guy]

Damn, ill see if I can work magic asap, that ecu would be perfect for me.

[x240xdrifter]

how much for the injectors shipped to 03855?

[penco]

Im going to check and see if that piping will work with my blitz front mount. Do you have a oil pan for the red top?

[jdminspiredcd7]

how much for the greddy airnx intake,shipped to 90706? pm me please.

[1sloREX]

how much for exhaust shipped 22003

[AznDrftr.]

detchwork 555injfmic

shipped 76549

[stevejames3]

how much for the injectors shipped to 03855? 325shipped

Im going to check and see if that piping will work with my blitz front mount. Do you have a oil pan for the red top?
its not the best looking pipe but i just leak tested a while ago because i thought i had a boost leak, and it was good.
how much for the greddy airnx intake,shipped to 90706? pm me please. $35

how much for exhaust shipped 22003
250+shipping
detchwork 555injfmic

shipped 76549 325shipped

[92-sr20-s13]

How much for the FPR and Oil pressure gauge shipped too calgary AB canada..PM me

[AznDrftr.]

and the FMIC?

[stevejames3]

here is a quick list i put together with prices to give you an idea what im looking to get out of everything. if anything sounds way off just pm me and let me know. its 5:45 am and just doing this real quick. im not 100% firm on all of these prices but please dont lowball me. almost all of these parts have less than 500 miles on them.

aluminum driveshaft: 350shipped

26mm Z brakes(front and back, calipers,pads, rotors and ebrake): pm me, i have to get shipping quote before i post a price.

megan racing 32 way adj coilovers: 800+shipping

z32 maf: 125 shipped

detchwork 555inj: 350shipped (with stock fuel rail, dont want to damage them trying to press out)

act 2600: 350shipped (about 500miles on it)

aeromotive fpr: 140 shipped with gauge

greddy airnx intake: filter only

greddy 3" dp: 160shipped

3" exhaust (not a mojor brand, sounds pretty nice): dont really want to ship

1 enthalpy ecu: 325
power fc: SOLD

full motor (will seperate): dont want to ship. pm me about this

tranny: dont want to ship. pm me about this

anything on the motor(manifolds water pump ect): pm for specific parts

24x12x3 FMIC: 120shipped

autometer temp, oil, and boost gauges(white face): 40shipped each

hallman BC:

greddy type s BOV: 110shipped

nismo motor mounts(and tranny): not sure

[90S13dude]

How much for the HKS 2510?

[stevejames3]

ill have to check the condition, but around 500 in good condition.

[stevejames3]

this stuff needs to sell. make offers on things you want. prices arent set in stone. but please no lowballing.

[stevejames3]

no one is interested in any of this stuff? if it doesnt start to go i might just keep it.

[stevejames3]

http://i27.photobucket.com/albums/c171/Stevejames3/P1010004.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010005.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010001-1.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010002.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010003.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010006.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010007.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010008.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010009.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010012.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010014.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010016.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010017.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010018.jpg
http://i27.photobucket.com/albums/c171/Stevejames3/P1010011.jpg

[2forty]

bought one of the ecu's from him. seems to be working pretty well, even though my turbo is a 2871r. ran 1bar on 91octane no problems, and pulls like a champ. just needs cams now and a retune :)

[stevejames3]

bought one of the ecu's from him. seems to be working pretty well, even though my turbo is a 2871r. ran 1bar on 91octane no problems, and pulls like a champ. just needs cams now and a retune :)

thanks for the good feedback. what are your afr's with that tune?

[2forty]

honestly i have no idea lol, waiting for my wideband. im having some creeping issues too right now. i thnk its my wastegate. 1bar starts creepin, maybe 1.2 by 6500. i havent redlined it yet, but it feels tasty.

[stevejames3]

great, im glad to see your happy with it.

[racerx2k1]

all pm's replied to.

i need to sell this stuff.

this stuff needs to sell. make offers on things you want. prices arent set in stone. but please no lowballing.

no one is interested in any of this stuff? if it doesnt start to go i might just keep it.

Bump limit is 2. You can repost in 2 days.