PDA

View Full Version : OH 1990 Hatch. Fully Built Redtop SR20. GT3071. Power FC, everything

solodriftS2k
08-24-2008, 01:12 AM
1990 240 SE fully loaded, no sunroof, powerlocks, power windows.
Full Built redtop SR. 77XXX miles on body, about 1000miles on the engine
"custom" red/black leather interior. body is rust free, frame has a LITTLE bit starting on the surface
mmmm lets start from the bottom..
New blueprinted and balanced crank
new main rod and bearings
Thrust washer
Carillo Rods
JE pistons 86.5mm 9.0-1 .020 over
Machined block and head face
block and head were hot tanked
Greddy metal headgasket
Earls stainless steel oil/coolant/gas lines
PeakBoost manifold
Garrett GT3076R polished, Vband, and Vband wastegate
FULL STRAIGHT 3in, turbo back
Apexi GT world exhaust
Tial 44mm wastegate
RC 880cc injectors
Apexi Power FC
Koyo Alum Radiator
New crank Angle Sensor
New Coil packs, q45 ignitor chip
Greddy Catch can
AEM 3.5 bar map sensor
NGK Powerdex AFX wideband eugo
CX racing intercooler
Greddy intercooler piping
Greddy Type S BOV
HKS gold intake filter
AEM Tru boost
Triple Angle Valve Job
Jim Wolf S4 intake/exhaust cam shafts
Jim Wolf Adjustable Cam Gears
Tomei Valve Guides
OEM vlave stem seals
OEM Rocker Arms
Brian Crower Valves
Ferrea Valve Springs and retainers
Cusco lightweight flywheel (10.56lbs)
ACT Xtreme 6-puck, good for 576tq
OEM slave cylinder
OEM Water/Oil pumps
battery relocation in trunk
Bosch Platnium +2 spark plugs
Tokico Shocks....stock springs :/
Suspension Techniques THICK front ad rear sway bars
Nismo Power Brace
New front pads and rotors
got a few different wheels coming with it (was for drifting but never got it out)
it put down 347rwhp at 12lbs at 5400rpm cuz of the bad coil packs (before i got new ones 2 days ago)
going back in monday to do another fine tune and dyno and set boost (20lbs HIGH...14lbs LOW)

I know theres some stuff im missing but im pretty much seeing how much i could get, i have alot of the receipts and i have about 23k into the car. Id like to set it at.....$12,500 OR BEST OFFER! VERRYY FLEXIBLE!
the body needs a little bit of attention, previous owner had side skirts and rear bumper molded on, rear bumper is still on there. for an extra 3k-4k, ill have all the body work done and ANY color you want and ill throw some sportmax 962's 17x7 and 17x9 with brand new tires.
PM me with any offers...
I AM LOOKING FOR A SPORTBIKE (CBR600, GSXR600, BUT I WOULD MUCH RATHER HAVE AN R6) PLUS CASH!!
http://i37.tinypic.com/iljg90.jpg
http://i37.tinypic.com/ypjq0.jpg
http://i35.tinypic.com/2mo12dy.jpg
http://i34.tinypic.com/29g02f4.jpg
http://i35.tinypic.com/2zsb3w3.jpg
http://i35.tinypic.com/10z1baf.jpg
http://i38.tinypic.com/lfq5h.jpg
http://i33.tinypic.com/2n07f2f.jpg
http://i35.tinypic.com/f351m9.jpg
http://i37.tinypic.com/21j6mv8.jpg
http://i35.tinypic.com/dlg515.jpg
http://i33.tinypic.com/20psu85.jpg
http://i38.tinypic.com/2nir53q.jpg
http://i34.tinypic.com/hwxvr4.jpg
http://i35.tinypic.com/nf0i1i.jpg
http://i37.tinypic.com/qn1gdl.jpg
1989rps13
08-24-2008, 01:56 AM
18yr old and spent 23k already??? :confused:
solodriftS2k
08-24-2008, 10:48 AM
yes, had my first SR at the age of 15. Did 97% of the swap/turbo kit and bolt ons.
240cracker
08-24-2008, 11:12 AM
18yr old and spent 23k already??? :confused:

whats wrong with that? im 19 and up there too haha

nice setup glws
solodriftS2k
08-24-2008, 11:19 AM
thanks man. i wish i wouldnt have to sell it so i could focus on the body and suspension now but i lost my license in my DD truck :( lol
Altered_Image
08-24-2008, 02:08 PM
I don't have that much cash, looks like a great build, like I said before (on your other posting), nice engine! I am up in Cleveland and have a 2003 Suzuki 650s sport touring bike with about 2K miles on it plus cash? If you are interested in negotiating a partial trade, pm me. +1 on the engine work!
solodriftS2k
08-24-2008, 02:44 PM
ohhh if only you had a 99-04 R6 :(:(:(:( sell yours, buy one and well trade :)lol but thanks alot man for the props!
mastaflash05
08-24-2008, 06:20 PM
im interested. has the car ever been wrecked?
Altered_Image
08-24-2008, 06:37 PM
ohhh if only you had a 99-04 R6 :(:(:(:( sell yours, buy one and well trade :)lol but thanks alot man for the props!

If I could sell the darned thing, I would just have more cash...
solodriftS2k
08-24-2008, 08:16 PM
im interested. has the car ever been wrecked?

was in a little fender bender, i had a new bumper put on, where the bumper connects to the cor support, it had bent the core support a little so i just had that replced too, thats why the different shade of red. It did not affect any suspension parts or frame. the title is clean and in my name, drives perfectly down the road, alignment is perfect.
solodriftS2k
08-24-2008, 08:19 PM
If I could sell the darned thing, I would just have more cash...

well dam lol i wanna get rid of this thing so i dont have to see it anymore cuz i cant drive it! :smash: :duh:
Altered_Image
08-24-2008, 08:23 PM
well dam lol i wanna get rid of this thing so i dont have to see it anymore cuz i cant drive it! :smash: :duh:

Well, if you are willing to part it, I will trade you my bike for the engine/trans, etc....
solodriftS2k
08-24-2008, 08:33 PM
Well, if you are willing to part it, I will trade you my bike for the engine/trans, etc....

bike anddddddd 20k???? haha jk! no, if i dont sell it before spring, ill part it. but I WOLD REALLY WANT to sell it in like 2 weeks lol i am a bit flexible on the price guys!
mastaflash05
08-25-2008, 07:56 AM
if parted, im interested in the apexi unit.
Zerolift Autolab
08-25-2008, 03:53 PM
Thats a GT3076R Turbo brother ! I remember that when it was put together.
solodriftS2k
08-25-2008, 09:47 PM
bummppppp, still for saleee buy it in a week...ill take 1300 off. OH! if your in ohio or near...if you need anything from tuning to your wheels painted, give Mead Engineering a call or stop in (TELL KEPP OR BRYON THAT NATE SENT YOU) Meadengineering.com i got quite a few things done there with this car and previous cars and they did one hell of a job. i highly recommend them
Zerolift Autolab
08-26-2008, 08:12 AM
The car was tuned here on wastegate only - who did / is doing the high boost tuning ?
solodriftS2k
08-26-2008, 10:46 AM
i got a 20lbs spring in there now..
solodriftS2k
08-26-2008, 10:50 AM
AP Tuning (RX7store.net) here in columbus. Yea but i got a AEM Tru Boost put in so were gonna mess with it a little bit tomorow on the dyno
!Zar!
08-26-2008, 10:58 AM
ohhh if only you had a 99-04 R6 :(:(:(:( sell yours, buy one and well trade :)lol but thanks alot man for the props!

If you're trying to get an r6, at least try to get fuel injected model.

They didn't start till 03+
solodriftS2k
08-26-2008, 11:10 AM
If you're trying to get an r6, at least try to get fuel injected model.

They didn't start till 03+


it doesnt really matter to me, i just wanna ride with my friends. im not gonna stunt or do anything dumb. but htanks man
solodriftS2k
08-26-2008, 07:31 PM
bumpppp, $11000 OBO anyone??
solodriftS2k
08-27-2008, 10:51 AM
ok, im thinking about parting the engine/tranny and interior. who wants what???
exitspeed
08-27-2008, 12:31 PM
ok, im thinking about parting the engine/tranny and interior. who wants what???

bumpppp, $11000 OBO anyone??

AP Tuning (RX7store.net) here in columbus. Yea but i got a AEM Tru Boost put in so were gonna mess with it a little bit tomorow on the dyno

bummppppp, still for saleee buy it in a week...ill take 1300 off. OH! if your in ohio or near...if you need anything from tuning to your wheels painted, give Mead Engineering a call or stop in (TELL KEPP OR BRYON THAT NATE SENT YOU) Meadengineering.com i got quite a few things done there with this car and previous cars and they did one hell of a job. i highly recommend them

well dam lol i wanna get rid of this thing so i dont have to see it anymore cuz i cant drive it! :smash: :duh:

You get a total of two bumps.