t25 to t28

[jdm510]

if my stock one is bad and i can get a good deal on a t28 can i just bolt this on and it can work just like the other one or will i have to tune it and stuff i wana stay away from tuning i want this thing to be totally stock internals just bolt ons

also when i get my car to top gear the car has shut off so far at 116 117 and 118 and i have never got it to go over is this a normal govener????

[projekt_s13]

Yea its bolts right up, BUT you still need braided turbo line with the oil restrictor, and the output elbow spacer thing that corrects the turbo outlet angle. No need to tune it.

[Sileighty_85]

Yea its bolts right up, BUT you still need braided turbo line with the oil restrictor, and the output elbow spacer thing that corrects the turbo outlet angle. No need to tune it.

you dont have to get the angle corrector elbow thingys, Im using the T-25 intake and outlet elbows on my T-28 you just have to cut about 2 ins off the turbo intake pipe elbow and it will work. I also reclocked my hosuing too

You can boost a T-28 on stock internals Stock SR's will hold 500 Hp

But you need to get bigger injectors and a tune if you wanna boost higher than 10psi on the T-28

I advise not going above 10Psi on 370cc injectors it beings to lean out

[projekt_s13]

you dont have to get the angle corrector elbow thingys, Im using the T-25 intake and outlet elbows on my T-28 you just have to cut about 2 ins off the turbo intake pipe elbow and it will work. I also reclocked my hosuing too

You can boost a T-28 on stock internals Stock SR's will hold 500 Hp

But you need to get bigger injectors and a tune if you wanna boost higher than 10psi on the T-28

I advise not going above 10Psi on 370cc injectors it beings to lean out


lol yea i know you dont need them but im not good at chopping stuff, I end up fucking things up. Plus its easier to just bolt it up then cutting stuff.

[SHIFT_*grind*]

I also reclocked my hosuing too

Reclocked your housing? Why?

[jdm510]

stock oilline will not work??>
where do you get the line and elbow spacer your talking about??


Yea its bolts right up, BUT you still need braided turbo line with the oil restrictor, and the output elbow spacer thing that corrects the turbo outlet angle. No need to tune it.

[wwwyzzerr]

http://i167.photobucket.com/albums/u159/zilvia_album/P1260002.jpg

That is the restrictor he is talking about.

.030" oil restrictor (Ball bearing). This is to ensure the proper amount of oil is getting to your T25. Unrestricted oil flow will blow through the turbo oil seals and coat the insides of your intercooler pipes.

Taka Motorsports (http://www.takamotorsports.com/)

they sell them.

I got this info from this KA-T thread: http://www.zilvia.net/f/tech-talk/176575-oil-coolant-feed-return-line-ka24det.html#post1823733

[Sileighty_85]

Reclocked your housing? Why?

not much but slightly for the turbo inlet when using the the Stock T-25 intake pipe, it points down too far

[jdm510]

k so my stock sr20det with t25 dose not have this????


http://i167.photobucket.com/albums/u159/zilvia_album/P1260002.jpg

That is the restrictor he is talking about.

.030" oil restrictor (Ball bearing). This is to ensure the proper amount of oil is getting to your T25. Unrestricted oil flow will blow through the turbo oil seals and coat the insides of your intercooler pipes.

Taka Motorsports (http://www.takamotorsports.com/)

they sell them.

I got this info from this KA-T thread: http://www.zilvia.net/f/tech-talk/176575-oil-coolant-feed-return-line-ka24det.html#post1823733

[Sileighty_85]

k so my stock sr20det with t25 dose not have this????

The stock banjo bolt for the hard lines has the restrictor in it.

T-28 BB turbos require less oil pressure than the T-25 Journal bearing.
So if you run too much Oil pressure to the BB Turbo you will blow the oil seals out.



Yey 1,000th post o^_^o

[projekt_s13]

Turbo spacers, i found them on ebay but frsport.com sells them too.

http://i23.ebayimg.com/04/i/000/da/3a/1291_1.JPG

http://i9.ebayimg.com/07/i/000/da/3a/12c0_1.JPG

[KwKouki]

I really dont remember putting a oil restrictor on my t28, but then again it might have come with the taka lines.

[projekt_s13]

I really dont remember putting a oil restrictor on my t28, but then again it might have come with the taka lines.

iirc they are included with a t28 kit.

[KwKouki]

ahh ok then :)