FS: S13 Parts (All kinds... KA and SR)

[kazuo]

w00t

I have stuff. You have money. I could use money, and I could use to get rid of this crap. You make offer for my crap, and maybe I'll sell it to you! Otherwise, it becomes eBay fodder. Or trash. I'll accept trades for SR20 parts, just make an offer.

All items are in good condition unless noted.

- Stock Airbox from HS13 240SX, running a KA24E.
- Jim Wolf Technology "Pop Charger" Air Filter (used for about 4 mos./less than 500 miles) for KA motors. Will probably work on others too. :P
- KA24E MAFS. (heehee.. I know *somebody* needs this!)
- KA24E 5-speed transmission. Clutch isnt perfect, but it works.
- KA24E Motor. Has a bit over 178,000 and some rod knock. Runs, but will probably die sometime in the next 22k miles.
- KA24E Uncut harness.
- KA24E ECU.
- KA24E Fan Shroud.
- Koyo Radiator for KA24 motor. This is NOT an aluminum radiator! Used for less than 2,000 miles, in like new condiiton.
- KA24E Power Steering Resevoir.
- Miscellaneous KA24E parts from the engine bay. Just about everything. Name it and I probably have it somewhere on the floor! :P
-JDM 180SX bodywork. Hood, and L/R Fenders. All in decent shape. A few bangs and dents here and there, but nothing that can't be fixed with a hammer.
- JDM 180SX RHD Dashboard. In good shape, with a few small nicks here and there.
- JDM 180SX Digital Climate Control.
- JDM 180SX Dash Harness. (This would help you to get that climate control working!)
- OBX Lower Tie Bar for S13/S14. Polished.

I'm sure I have some other crap laying around too. Just ask. Make an offer. Take this **** dammit!

I accept paypal, money orders or cash. No checks please. I have 100+ eBay refs and I'm a verified PayPal user, so don't trip. Local pickup in the San Francisco Bay Area is okay and preferred, especially on the larger pieces like the bodywork and the motor/tranny.

Thanks for looking

[mixedwell]

i need the speed sensor. im not sure if its the same for the zenkis or the choukis. i just need a speed sensor for my 91 KA. the car is 5 speed so i hope that works. and speed sensor? same story.

re cap:

speed sensor

knock sensor

s13 ECU

holla
mixedwell ;)

[crioten]

how much for the 180sx climate control and harness? and will it work in a s13 1991? i am really interesten in it, please email me at [email protected]

[95Blue240sx]

i might want that rice mod obx lower tie bar for the right price. let me know how much. im in san jose so no ship =P

[AmherstSR20DET]

You wouldn't, by chance, know where you can get the harness to install the digital clomate control unit in a 91 240SX...

it looks so nice just sitting there, I'd love to see what it looks like installed and working...

[SilviaDriver]

Originally posted by AmherstSR20DET
You wouldn't, by chance, know where you can get the harness to install the digital clomate control unit in a 91 240SX...

it looks so nice just sitting there, I'd love to see what it looks like installed and working...

it will not work for you, this has been discussed so many times, do a search and ull find your answer y it wont work

[AmherstSR20DET]

I know... in short, most people consider impossible. My view is nothing is impossible. In this case, difficult and time consuming maybe, but I'm the type of person willing to put in the time.

If I have to buy an entire S13 front clip to get the damn thing to work, just say that. I'm already planning on swapping in an SR20DET, so it would be much more to order the clip over just the motor/tranny.

[kazuo]

mixedwell: I have the speed sensor from the SR, not the KA. I also have the ECU and the knock sensor avaliable (it's all from a SOHC, *NOT* a DOHC so make sure you understand that... otherwise it wont work for you I don't think).

95Blue240sx: $50 shipped to your door for the tie bar.

AmherstSR20DET: I have it, it came with my front cut.

And to the guy who said it won't work... if you have the full dash harness, and all the wiring, you can make it work properly in a USDM vehicle. Of course, it's a pain in the ass,and you're gonna need FSM's, but it can be done.

Okay, so yeah... if anyone else wants ****, PM me! I still have a lot of this stuff left! Looks like I'm parting out the motor and selling the tranny seperate, so make offers!

[sil-hybrid]

you have a PM hope stuff is still here.

[knightrider]

how much for the radiator?

[95Blue240sx]

kazuo - im from san jose and i know your in the bay area too. if you can give me a call im interested in the jwt pop charger. ill pm you