PBM man..boost controler in stall

[ocn]

can some one please inform me on how i hook up the PBM boost controller.. im a bit confused as to what line go where on the check valve and where the lins go off the controller? thank

[ocn]

i forgot to mention it came with no instructions so i dont know where to start

[ROUGE180]

Wish I could assist. I'm sure someone will post something soon but in the meantime, why don't you just contact PBM? Maybe they can fax you instructions to your job or atleast send you instructions so you can have them handy.

[Addicted2Kouki]

Looks pretty simple.

T fitting to T off vacuum/boost source.

Manual controller has arrow pointing in for the input.
output goes to actuator

[ocn]

right the t fitting gos in line to the actuator and one line from the controller goes to the t fitting but that leaves me one open line ?

[RurouniMidnight]

T fitting goes inline with vaccum source from intake mani and runs to boost gauge, and in side of boost controller is ran to boost source (nipple on intercooler piping or boost tap on the hotpipe coupler to turbo), and the other side of boost controller is going to wastegate actuator.

[Addicted2Kouki]

T fitting goes inline with vaccum source from intake mani and runs to boost gauge, and in side of boost controller is ran to boost source (nipple on intercooler piping or boost tap on the hotpipe coupler to turbo), and the other side of boost controller is going to wastegate actuator.

pretty much what i said.

[Mikey88]

^^^you should just tell him to toss it and buy your blitz ebc

[ocn]

T fitting goes inline with vaccum source from intake mani and runs to boost gauge, and in side of boost controller is ran to boost source (nipple on intercooler piping or boost tap on the hotpipe coupler to turbo), and the other side of boost controller is going to wastegate actuator.


this is what im talking about the red would indicate the tapping ..


http://i81.photobucket.com/albums/j232/hornet2005/misc/untitled.jpg

[ocn]

^^^you should just tell him to toss it and buy your blitz ebc


lol yo waht up i was you at the car wash the other night off of marshall... ya i would but.....ya .. i dont have the money right now and im getting ready to leave for japan so. ill buy shit and send it back later..

[Mikey88]

haha oh you the guy with the coupe?

heres my paint description:

http://i21.photobucket.com/albums/b297/Alias118/untitled-3.jpg?t=1218426508

[ocn]

yep thats me.. you know hoyu,rex an all them ? any wayz me an hoyu couldnt figure it out. he had an idea but of course were not gonna trial and error on my motor lol..

[Mikey88]

yep thats me.. you know hoyu,rex an all them ? any wayz me an hoyu couldnt figure it out. he had an idea but of course were not gonna trial and error on my motor lol.. yah i do...rex, mark and i did my swap. im using a profec b spec 2 on my car.

[ocn]

haha oh you the guy with the coupe?

heres my paint description:

http://i21.photobucket.com/albums/b297/Alias118/untitled-3.jpg?t=1218426508


only problem is the arrow on the controller says it goes to the actuator and the line that you have goin from the t fitting to the controller that outlet on the fitting says it goes to the actuator also .. you know what im sayin?

[Mikey88]

on the controller itself do you know which port goes in and out?

[ocn]

well the bottom fitting has an arrow pointing out and it say to actuator .. on the fitting IT has a port the say to the actuator? shit has me confused lol

[Mikey88]

whered you get the boost controller from? wats the company or brand? shit man haha so the bottom has an arrow pointing out and how bout the top one?

[ocn]

nothin on the top arrow bro lol . . powered by max (PBM) controller . . i think im gonna have to call them in the morning .. im egar ro hook this shit up cuz i have a blitz ecu tuned for 12psi right now and im running 7 right now soo, you know lol

[Mikey88]

is this it

http://gtfactory.jp/cms/maxcat/mbc/small/P1010088.jpg

[ocn]

yup and both those arrows say to the actuator ..?

[Mikey88]

looks like it would go like this then
http://i21.photobucket.com/albums/b297/Alias118/untitled-4.jpg?t=1218434277

[ocn]

that would work if the arrow was pointing the opposite direction but the arrow is an out put, shit aint gonna work like that look close ant the pick youll see what i mean the arrows go to the actuators . . .id try i the way you showin but i dont want my shit to spike,, or detonate .. you know what i mean? i guess ill call early morning to figure it out .. thanks for the input tho ..

[ocn]

i still need help PBM are not sure how you hook up the t fitting.... does one of the ports go to the BOV i really need help its giving me a headache.. one side of the t fitting has restiction like its spring loaded the other 2 dont the flow free..

[ocn]

some say one line goes to a compression port but the t 25 doesnt have a compression port ?