PDA

View Full Version : what am i lookin at?

Mikey88
08-10-2008, 06:29 PM
just a quick question. ive looked around at other post to match my setup in some way and couldnt really find a similar setup with numbers. i have not been able to get any dyno/tune time due to being a student and working full time. i just wanna know with my current setup what power range i maybe at with most of your guys knowledge...

s13 redtop sr20det
t25 @ 12-13psi
blitz LM fmic
apexi safc 2
nismo afpr
stock injectors
z32 maf
hks super suction intake
3" turbo back

it seems im missing something but idk haha
aNskY
08-10-2008, 06:52 PM
.... ~220whp ....
Psycho 240 Freak
08-10-2008, 06:53 PM
Around 220 whp
g-via
08-10-2008, 07:22 PM
I'm going to say about 240 whp, because I make 225 whp on 7 psi with similar setup
koukimonster139
08-10-2008, 07:33 PM
215whp


max
Addicted2Kouki
08-10-2008, 07:42 PM
about 220whp seems right.

you can get more out of it with an s14 t28 with your current setup
but i wouldnt go more than 10psi IMO.
some people have been known to push it to 12psi though.
aNskY
08-10-2008, 07:56 PM
I'm going to say about 240 whp, because I make 225 whp on 7 psi with similar setup

Is this on a dynojet or an ass dyno? that seems super optimistic. stock sr (with the solenoid) runs 11psi and only makes 205 to the fw
fliprayzin240sx
08-10-2008, 08:09 PM
Depends on how tuned the SAFC is...
burnsauto
08-10-2008, 08:19 PM
you wont know until you get it strapped on a dyno. There was a member who made around 250 with a similar setup...it all comes down to the condition of the engine, the quality of the parts, and the tune.

other then that, you might as well be shooting in the dark of night.

good luck :)
g-via
08-10-2008, 08:24 PM
Is this on a dynojet or an ass dyno? that seems super optimistic. stock sr (with the solenoid) runs 11psi and only makes 205 to the fw


yah yah yah...it's a dynojet. lol
Mikey88
08-10-2008, 08:44 PM
Depends on how tuned the SAFC is...

yah ive seen how maks hatch was able to put out 268 with his safc and setup haha...

ok looks like ill be able to get my buddy to dyno my car at his school so i can get a baseline and see where im at.
Silverbullet
08-10-2008, 08:46 PM
lol at ppl arguing.

different dynos will give out varying results. Just having different diameter wheels and tires can make a difference in read out. Expect a mid to high 13 sec car assuming typical setup.
projekt_s13
08-10-2008, 08:51 PM
83.24654333345 hp at the flywheel.