drifts135
08-09-2008, 11:08 AM
FS: KA24 AE86 drift car.
Link to build thread: http://www.ziptied.com/forums/index.php?topic=15875.0
$5500
I’m changing chassis, so my RUST FREE KA24 AE86 drift car is up for sale in a rolling chassis form.
Engine has around 90K miles on it, chassis has around 250K miles on it, but the odometer/speedometer does not work as its not connected to the Nissan transmission.
Car will come with following parts still installed:
Megan Coilovers front and rear
T3 Negative Camber Roll Center adjusters
T3 Rear pandhard bar
No Name Adjustable 4 links with Heim joints
TCSportline tension rods
KA24DE with about 90K miles and perfect compression/no leaks.
Koyorad Aluminum Radiator for AE86
Electric fan
Custom engine mount brackets with TRD engine mounts.
Looped PS rack
New inner and outer tie rods with angle spacers
New front wheel bearings
New crossdrilled rotors and pads front and rear
Goodrich SS brake lines
Custom ebrake handle
Stripped interior (can provide all interior pieces with sale, but sound deadening has also been removed)
Origin full rear over fenders
Knockoff TRD hatch spoiler
Stock GTS seats
Vertex knockoff rear bumper and sides, Damaged Uras knockoff front bumper (no bumper supports)
Front Kouki JDM turn signals
T3 Tow hook (slightly bent from wreck).
14x7 Supra wheels with decent tires Painted gunmetal.
Welded Kouki rear GTS diff.
Exedy Stage 1 clutch
New clutch master cylinder
TRD Nardi steering wheel
History on the car and its build can be found here:
http://www.slidewaysonline.com...=2681 (http://www.slidewaysonline.com/forum3.0/viewtopic.php?f=30&t=2681)
And
http://www.ziptied.com/forums/...875.0 (http://www.ziptied.com/forums/index.php?topic=15875.0)
The car was purpose built for drifting, so its not the prettiest, or most practical for street use. This car mostly sees track time.
The rear over fenders were done at a body shop with proper tools and welder. The rear quarters were cut and re-welded in order to prevent wheel clearance issues. They were not installed as a result of an accident.
The car recently had a slow speed front impact at Summit Point raceway. The drivers front fender, headlight need replacement. The lower and upper core support were slightly bent in the impact, but not enough to damage anything else. Alignment and suspension was not affected by the impact. Front bumper was damaged and repaired with zip tie stitches, but it is in one piece again. A replacement can be bought at Chaser Aerodynamics for cheap. I have installed a new driver side headlight since the wreck not shown in pics.
This car is RUST FREE perfect for someone wanting to build a serious drift competition car. The interior is stripped and ready for stitch welding/cage. Dash is still complete, and interior pieces will all come with the car if wanted.
Current pics from like 15 minutes ago (more can be found in the build link I posted):
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale001.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale002.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale003.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale004.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale005.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale006.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale007.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale008.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale009.jpg
http://i47.photobucket.com/albums/f180/Slideways_VA/Independence%20Drift/_MG_1850.jpg
http://i47.photobucket.com/albums/f180/Slideways_VA/Independence%20Drift/_MG_1863.jpg
http://i47.photobucket.com/albums/f180/Slideways_VA/Independence%20Drift/_MG_1860.jpg
Note the headlight HAS BEEN REPLACED since these pictures.
Pictures from old events:
http://i89.photobucket.com/albums/k209/kingofnod/_MG_2138.jpg
http://i89.photobucket.com/albums/k209/kingofnod/_MG_2139.jpg
Thanks for looking. My plans are to move onto to a new type of car, but need this one gone first!
$5500
-Ryan
PM me, reply here, or email me ([email protected])
Car located in BALTIMORE, MD
------
Note: Posting this for a friend. E-mail him for serious inquiries.
Link to build thread: http://www.ziptied.com/forums/index.php?topic=15875.0
$5500
I’m changing chassis, so my RUST FREE KA24 AE86 drift car is up for sale in a rolling chassis form.
Engine has around 90K miles on it, chassis has around 250K miles on it, but the odometer/speedometer does not work as its not connected to the Nissan transmission.
Car will come with following parts still installed:
Megan Coilovers front and rear
T3 Negative Camber Roll Center adjusters
T3 Rear pandhard bar
No Name Adjustable 4 links with Heim joints
TCSportline tension rods
KA24DE with about 90K miles and perfect compression/no leaks.
Koyorad Aluminum Radiator for AE86
Electric fan
Custom engine mount brackets with TRD engine mounts.
Looped PS rack
New inner and outer tie rods with angle spacers
New front wheel bearings
New crossdrilled rotors and pads front and rear
Goodrich SS brake lines
Custom ebrake handle
Stripped interior (can provide all interior pieces with sale, but sound deadening has also been removed)
Origin full rear over fenders
Knockoff TRD hatch spoiler
Stock GTS seats
Vertex knockoff rear bumper and sides, Damaged Uras knockoff front bumper (no bumper supports)
Front Kouki JDM turn signals
T3 Tow hook (slightly bent from wreck).
14x7 Supra wheels with decent tires Painted gunmetal.
Welded Kouki rear GTS diff.
Exedy Stage 1 clutch
New clutch master cylinder
TRD Nardi steering wheel
History on the car and its build can be found here:
http://www.slidewaysonline.com...=2681 (http://www.slidewaysonline.com/forum3.0/viewtopic.php?f=30&t=2681)
And
http://www.ziptied.com/forums/...875.0 (http://www.ziptied.com/forums/index.php?topic=15875.0)
The car was purpose built for drifting, so its not the prettiest, or most practical for street use. This car mostly sees track time.
The rear over fenders were done at a body shop with proper tools and welder. The rear quarters were cut and re-welded in order to prevent wheel clearance issues. They were not installed as a result of an accident.
The car recently had a slow speed front impact at Summit Point raceway. The drivers front fender, headlight need replacement. The lower and upper core support were slightly bent in the impact, but not enough to damage anything else. Alignment and suspension was not affected by the impact. Front bumper was damaged and repaired with zip tie stitches, but it is in one piece again. A replacement can be bought at Chaser Aerodynamics for cheap. I have installed a new driver side headlight since the wreck not shown in pics.
This car is RUST FREE perfect for someone wanting to build a serious drift competition car. The interior is stripped and ready for stitch welding/cage. Dash is still complete, and interior pieces will all come with the car if wanted.
Current pics from like 15 minutes ago (more can be found in the build link I posted):
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale001.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale002.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale003.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale004.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale005.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale006.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale007.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale008.jpg
http://i89.photobucket.com/albums/k209/kingofnod/4AGE%20sale/86sale009.jpg
http://i47.photobucket.com/albums/f180/Slideways_VA/Independence%20Drift/_MG_1850.jpg
http://i47.photobucket.com/albums/f180/Slideways_VA/Independence%20Drift/_MG_1863.jpg
http://i47.photobucket.com/albums/f180/Slideways_VA/Independence%20Drift/_MG_1860.jpg
Note the headlight HAS BEEN REPLACED since these pictures.
Pictures from old events:
http://i89.photobucket.com/albums/k209/kingofnod/_MG_2138.jpg
http://i89.photobucket.com/albums/k209/kingofnod/_MG_2139.jpg
Thanks for looking. My plans are to move onto to a new type of car, but need this one gone first!
$5500
-Ryan
PM me, reply here, or email me ([email protected])
Car located in BALTIMORE, MD
------
Note: Posting this for a friend. E-mail him for serious inquiries.