View Full Version : s14 fender harness wire
FusionR240sx
08-08-2008, 10:09 AM
burnt thru my fender wiring harness.
what sizeare the wires in there? all the same or different?
about to go to where the car is and take the fender off and see how much damage i've done.
car doesn't start.
so i'm assuming a lot.
any and all help would be MUCH apprectiated.
i hit a pot hole so hard that it musta just snapped the ziptie from wher eit was and let the harness free and it was rubbing all the way home. thought i could make it.
thought wrong..
s13silady
08-08-2008, 10:36 AM
it varies from like 10g to 16g wired.. nothing big. make sure you solder those badboys..
GSXRJJordan
08-08-2008, 11:04 AM
^^^ Yup, the only problem is there are a few wires that are the same color but go to different things... taht, and the fact that there are a billion and a half wires, with 2 solders/wire... it takes a while lol.
brokeAs240sx
08-08-2008, 11:19 AM
don't forget to disconnect your battery before you start digging into the wire (just in case).
also, check your fuses & relays afterward - most likely, some of them fried as well.
WoolyS14DET
08-08-2008, 11:31 AM
OUCH Sorry to here that man it's a pain in the a**
FusionR240sx
08-08-2008, 04:07 PM
close thread!!
none of them were burnt thru completely at all
PHEEEEEEEW!!
taped the ones that rubbed up individually and hiked the the harness up some more.
thanks to you guys for the help tho!! +rep cominnnn
sbanzer123
08-08-2008, 04:15 PM
you can take the haness and zip tie it up into your fender. so theres no chance it will rub.
FusionR240sx
08-08-2008, 06:54 PM
you can take the haness and zip tie it up into your fender. so theres no chance it will rub.
that's what i did
hit a sick nasty pothole and i think it just snapped the ziptie off
it's tied up in 3 spots now tho.
:yum:
koukimonster139
08-08-2008, 07:09 PM
ever thought of using something a little sturdier than a fucking zip tie
ugh
not like the harness is important to the car at all
98koukile
08-09-2008, 12:23 AM
Whats sturdier than a zip tie? That shit holds drifterz bumperz on man!
FusionR240sx
08-09-2008, 12:51 AM
ever thought of using something a little sturdier than a fucking zip tie
ugh
not like the harness is important to the car at all
yea whats sturdier to go between the fender and there in that space that's gona keep it up there?
i'd rather relocate it personally but i don't want to.
GSXRJJordan
08-09-2008, 02:07 AM
I relocated my fuse box to behind the glove compartment. It was a bitch. And I ended up not using many of the factory circuits anyway... double bitch.
jh3xp
08-09-2008, 04:10 AM
that's what i did
hit a sick nasty pothole and i think it just snapped the ziptie off
it's tied up in 3 spots now tho.
:yum:
just 3 zipties? i put like 6 just so i dont ever have to worry about it again. lol
and use sum huge ass zipties or some snakes or sumtin.
Leetheslacker
08-09-2008, 06:20 AM
i used like 40 zipties.
tripled up.
koukimonster139
08-10-2008, 07:41 PM
im almost 100% sure this is sturdier than a ziptie....
http://i57.photobucket.com/albums/g210/driftgay/clamp.jpg
rightcoastimports
08-10-2008, 07:49 PM
I pulled my fender off last month and tried my best to relocate the thing and zip tie the harness but sure enough the tire burnt through the zip ties and the harness is just hanging over my tire now.. so not driving it until i figure it out.
Mikey88
08-10-2008, 09:25 PM
here do it like my buddies haha zip ties ftw!
http://a756.ac-images.myspacecdn.com/images01/90/l_4a624728b23820fabca1d07efcabe0a3.jpg
rightcoastimports
08-10-2008, 09:29 PM
not bad not bad... are those holes on the right factory or did he drill them..?
Mikey88
08-10-2008, 09:32 PM
i think one is factory and the others drilled idk haha... i did some drilling myself to get it higher than his
redclaw05
08-10-2008, 09:48 PM
i need to do this very soon. my car is pretty low and i hear it sometimes killin my harness or the fender cover.
FusionR240sx
08-11-2008, 02:16 PM
yea there's only like 2 holes to zip tie it to.
i drilled 1 more.
i might do a couple more if i start hearing it again
so far so good.
FusionR240sx
08-11-2008, 02:17 PM
not bad not bad... are those holes on the right factory or did he drill them..?
they are factory i think
don't remember.
but i think that they are.
FusionR240sx
02-09-2009, 04:16 PM
already...
it happened again.
i'm relocating it to the engine bay.
what size wires are in there?
i noticed like 20 are the same.
and there's like 4-6 that are 4x thicker...
thinking about calling off work 2morrow to get this done.
spossed to be 55 and sunny.
woot.
anyone know the sizes? otherwise i'll just snip off a peice of the idferent ones and go to the store and see what they got.
s14l0v3r
08-09-2009, 09:58 PM
i know this is old but this thread definetely helped a lot. chyea!
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.