Selling Bolt On Turbo Kit!!!

[hotS14]

I am selling an XS-engineering bolt on turbo kit for the 1995 thru 1998 240sx. This is my kit which I drove with for about a month and a half. My car is not a daily driver and is mainly for shows. I am in the process of buying a new house and I need the money. This kit puts out about 210HP to the wheels once bolted on. The website says about 230 but that's BS. I tried and tested this kit and it is great. It is brand new and I am throwing in the Profec B boost controller and my guages because I won't need them anymore. It is currently in an ebay auction for all of you to check out. The link is:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1876337940

[Mark & Irena]

Are you selling the Vortech FMU with this kit? I'm almost sure it comes standard with the XS package.

[Twinturbozs]

you put down 210rwhp at stock boost? what did you have the profec cranked up to?

[hotS14]

Check www.xs-engineering.com for the specs

[Twinturbozs]

Again, did you put down 210rwhp at stock boost? how much boost could you run on it with the profec? thank you.

[hotS14]

Twinturbozs, the profec B has two different knobs for boost. When driving around it was kept at 4.5 psi on the first setting, and when I actually ran the car I selected the second boost setting which was set at 6.5psi. At this setting the car will put down the power. I know another owner of this kit that I met at a car show and he says the max boost with stock fuel is 7 psi. I will tell you this part because it was my next step and I did lots of research so this should be of good use: By simply adding twin turbo 300zx fuel injectors, and a Cobra mass airflow sensor, it is possible to run UP TO 11 psi on stock internals. I wouldn't recommend running that much boost, but nevertheless it has been done before with good results. But 9 psi sounds good to me. Thanks for your interest