which rims?

[lilgualda]

http://www.carsearch.com/photos/772617.jpeg
I got a 1997 nissan pickup 2dr . I just dropped it 3 inches in the front and four in the rear. I'm lookin to get some 15 inch rims in the front and maybe 16 or 17 inch rims in the rear. I've searched the net and can't really find any places that sell the rims i like. I've looked on tirerack.com and didn't see anything i liked either. I really like how the 5 spoke nissan titan rims http://base.googlehosted.com/base_media?q=http://www.wheels-and-rims.com/images/ALY62434U.jpg&size=2&dhm=b0ffe90f&hl=enlook but 18's are a little to big for me..Any help would be greatly appreciated!

keep in mind i need 6 lug rims

[cc4usmc]

wooooooooooooow

[lilgualda]

wooooooooooooow
...If you don't want to help me out please keep your comments to yourself. Thanks

[Flicktitty]

You might want to disregard this or do alot more searching before spending the time and moeny.

But have you tried to go with a 5lug setup? (300ZX/S14 240sx/Skyline etc) The wheel choices would be endless. not sure if that stuff would even work in your case?

Also check out Nismo wheels they make a 6? spoke NISMO wheel that came on Xterras and Titans?

Also check out Rota they make truck rims too now.

[lilgualda]

You might want to disregard this or do alot more searching before spending the time and moeny.

But have you tried to go with a 5lug setup? (300ZX/S14 240sx/Skyline etc) The wheel choices would be endless. not sure if that stuff would even work in your case?

Also check out Nismo wheels they make a 6? spoke NISMO wheel that came on Xterras and Titans?

Also check out Rota they make truck rims too now.
Cool thanks man i really appreciate it. I'm looking to swap the truck with either the 95 twin cam 240 motor or the sr20det so i rather spend the money in going fast then a 5 lug set up. I wanted to get the titan rims but you have to bore the hub so the rim will fit. I just want to buy rims tires and slap it on there with out having to modify it to fit!

[lilgualda]

i just checked rota.com and they only make 4,5, and 8 lug rims...

i used to have rota slips on my ek coupe
http://i66.photobucket.com/albums/h276/lilgualda/jimmyspic034.jpg

[DUFFM4N]

dont know the exact lug pattern...all you said was 6 lug

but you could pick up these SSRs from Takumi Project..they want $300 for all 7 wheels

http://takumiproject.com/web%20photo/c0701104.JPG

[EDacIouSX]

TE37s in bronze or whit
ehttp://www.rayswheels.co.jp/emenu/datas2/VOLK/080_TE37X/big.jpg

or my personal favorite

57SX Pros in RMC or Grey Silver

http://www.rayswheels.co.jp/emenu/datas2/GRAM/085_57SX/big.jpg
http://www.rayswheels.co.jp/emenu/datas2/GRAM/083_57SX_PRO/big.jpg

[drift freaq]

wow am I really looking at this thread? WTF rims for your truck? If you can't make up your own mind how the fuck do you expect us to tell you what to put on your truck? Its like we don't even drive trucks(for the most part).

[DUFFM4N]

tub the wheel wells and do this to it

http://www.mautofied.com/AdPhotos/10093261_200712191623131.JPG

[DOOK]

where you get dam reeeeeeems from? (tyrese voice)

Escalade wheels...

[lilgualda]

dont know the exact lug pattern...all you said was 6 lug

but you could pick up these SSRs from Takumi Project..they want $300 for all 7 wheels

http://takumiproject.com/web%20photo/c0701104.JPG
my bolt pattern is
Bolt Pattern: (http://www.tirerack.com/wheels/tech/techpage.jsp?techid=92) 6-139

what size are those rims?

[lilgualda]

wow am I really looking at this thread? WTF rims for your truck? If you can't make up your own mind how the fuck do you expect us to tell you what to put on your truck? Its like we don't even drive trucks(for the most part).

Dude you're so cool. I'm jealous.

[lilgualda]

tub the wheel wells and do this to it

http://www.mautofied.com/AdPhotos/10093261_200712191623131.JPG
Sorry but i just dropped my truck. I'm not looking to bag it Thanks though

[DUFFM4N]

my bolt pattern is
Bolt Pattern: (http://www.tirerack.com/wheels/tech/techpage.jsp?techid=92) 6-139

what size are those rims?


15x7 +11 all around

[lilgualda]

15x7 +11 all around
so will they fit my truck?...

[DOOK]

yes... buy them now

[DUFFM4N]

so will they fit my truck?...

i dont know...try calling them (although they might be closed right now)

on the site it just said "6 lug"

What (http://www.takumiproject.com)

[lilgualda]

yes... buy them now
http://ohnolookoutitsaraygun.com/argh-Picard.jpg

That is all.

[DOOK]

Typical Applications: 4 runner TACOMA ETC

that is what the website has for applications, 4wd toyotas are 6x139.7 or whatever

[lilgualda]

i dont know...try calling them (although they might be closed right now)

on the site it just said "6 lug"

What (http://www.takumiproject.com)
Thanks man i'll give them a call in the morning. Anymore suggestions?

[lilgualda]

typical applications: 4 runner tacoma etc

that is what the website has for applications, 4wd toyotas are 6x139.7 or whatever


they will fit!!!!!

[DOOK]

they will fit!!!!!

I knew that when I posted...

yes... buy them now

[JoeC1982]

go with escalade/denali takeoff wheels, cheap and easy to fit.

[lilgualda]

go with escalade/denali takeoff wheels, cheap and easy to fit.
I was thinkin about that but i haven't really seen any that i like that come in 15in-17in

[UfoZ8myCow]

Just man up and get some Titan wheels on there.

[Mi Beardo es Loco]

hardbodies have a funny name.

[lilgualda]

hardbodies have a funny name.
They do haha. I hate searching my car on google cause it always comes up with all this homo shit

[SW20Racer]

They do haha. I hate searching my car on google cause it always comes up with all this homo shit

the future called. they said expect a second thread lock and a heavy chance of pinking. whatever the fuck that means...i dunno, im just a messenger. OF THE FUTURE.

[lilgualda]

the future called. they said expect a second thread lock and a heavy chance of pinking. whatever the fuck that means...i dunno, im just a messenger. OF THE FUTURE.


240SX Off Topic Rules and Guidelines

This is the Off Topic Forum. Any Technical discussion on the 240SX should be posted in the Technical Forum. Anything that’s not related to the Forum your posting in belongs in here.

Keep in mind that although this is the Off-Topic section, the main forum rules still apply. No posting of pornographic, sensitive, illegal material, etc is allowed. This means no copyrighted mp3s or movies, no Jenna Jameson, no Kobe Bryant's cellphone number. Keep your audience in mind when you post. This forum is open to users 13+. That means a thirteen year-old could see that goatse link you posted, so keep the vulgarity of your content to a minimum. Also search before you post that new flash animation you just found. Chances are, it might have been around the internet for a few years and you only now just found it. Reposts CAN be prevented.

This is not a private msg forum, so if you need to contact a single person please use the Private Message feature or Email.

Please respect others and the community. Not everyone can see eye to eye, although this does not permit you to attack other members. If you have a problem send them an email or PM.

Topics will be moved/locked at moderators discretion.

Signatures
Please see the post below regarding signatures.

Pornographic and/or Sensitive Material
This is a CAR forum. Moreover, this is a private forum which is publicly open to minors. These things mean Zilvia is about the LAST place for pornographic material to be presented. Any material above PG-13 which is either displayed via IMG tags, linked to, uploaded, or otherwise presented will result in ONE warning, followed by a BAN if the offense is repeated.
In addition, any information deemed sensitive such as celebrity phone numbers, social security numbers, VIN numbers not posted by their owners, etc. will be deleted and the user who posted it warned and then banned if the offense is repeated.

Pyramid schemes, etc
Users are not permitted to make money by utilizing Zilvia's bandwidth, other than by selling their parts, etc in the FS sections. Linking to pyramid schemes like freeiPods or freeflatscreens, hits4pay, etc etc WILL result in administrative action without prior warning necessary. If you have the slightest concern that something you're linking to might not be kosher, don't do it.

Grievances
Zilvia is not a grievance forum. If you have a problem with a seller or buyer, settle it with them. If you are unable to contact them and seek further assistance, contact your (and their) local law enforcement.

Racial Slurs/Ethnic bashing, etc
This sort of thing will NOT be tolerated. Users who choose to do so face permanent banning from Zilvia without warning.

In an effort to reduce post-whoring and other nonsense posting, we have applied a few more new rules.

No more IBTL-types of posts


These include:

In Before The Lock
In Before The Ban
In Before The Pink
In Before The Brown
and other funny or not-so funny variations.
If you find yourself in a situation where you feel a mod will intervene, then maybe instead of posting nonsense to get your postcount up, you could report the thread. The icon is found under the username and looks like this: http://www.zilvia.net/f/images/buttons/report.gif. And it also adds 1 post to your count when creating the reported post in the infraction forum only moderation can see, if that matters to you.


No more <msglength> in your posts

If your message is too short to meet the message length guidelines, then it is probably not very useful. This does not mean that you can beat the system by adding nonsense like "msglenghbullshitblablabla". Make your posts worthwhile and be a good contribution to the forum. Agreeing by saying "Yes. msglength" does not add any value to the forum.

Sanctions


Depending on the person, the quantity of infractions and many other variables, infractions could range from:

Post(s) Deleted
Warning
Pinking / Browning
Banning

So remember, less nonsense, more reporting (http://www.zilvia.net/f/images/buttons/report.gif) and everyone is happier!



Okay i read the rules and i don't see any part of my thread violating one rule. Last time i checked Moderators are here to help members out on the site and to patrol the site.

Most of the Moderators that have chimed in on my thread haven't been useful at all and really rude. But i guess that's how yall run your site. Try helping the members out instead of talking down on them.:goyou:

[Helghast]

SHUT THE FUCK UP, NO CARES.

/thread.

[spoolandslide]

http://images.artnet.com/artwork_images_424175658_184542_diane-arbus.jpg

"STOP IT MEANIES"

[steve_o1989]

NissanCustoms (http://www.nissancustoms.com/)

They will be a little more understanding towards you. We won't be. You can run escalde wheels, denali wheels, silverado wheels...you will need to bore the center. This isn't really the place to be asking what 6-lug wheels to run on your truck. The people here are running either 4x114.3 or 5x114.3, not 6 lug. Now run along children.

[mrmephistopheles]

Okay i read the rules and i don't see any part of my thread violating one rule. Last time i checked Moderators are here to help members out on the site and to patrol the site.

Most of the Moderators that have chimed in on my thread haven't been useful at all and really rude. But i guess that's how yall run your site. Try helping the members out instead of talking down on them.:goyou:


1st - No mods have replied to your thread. Only regular users and premium members. I'm an administrator.

2nd - Everybody is simply enforcing the great unwritten rule of Zilvia - no handholding/spoonfeeding/asswiping. We're all big kids here and we don't need anybody to wipe the snot from our nose. If you don't fit into that category, maybe you don't belong here.

3rd - What did you REALLY expect from a forum full of S- and Z-chassis owners? You'd be WAY better off asking a truck-related forum.