NismoTuner21
08-04-2008, 09:43 AM
ok so 3 days ago i crashed my z. i had the vdc off and i was going around 30 MPH and the car spun out and slammed against the curb due to my back tire blowing out. i trashed 2 work emotion kais and the toe of the car looked majorly fudged since it stuck out. when i looked under the car the rear right lower control arm was realllyyyyy bent. therefore figured if i purchased a new one it would fix my problems. so today i spent a couple hours changing it out and then i put it back on thinking i was in the clear. but no. it was still toeing out slightly and we got in the car and the allignment was wayyyy off. not only that but the VDC and slip button are illuminated and cannot be shut off. the rear tires squeel when going over 25 MPH and the car feels like it wil loose control if i turn it to the left hard, the tires will squeel louder by the way. by the way i have stance coilovers. everything underneath looks fine and not bent. does anyone know whats wrong??? btw i put stock 07 rims on the car.
PLEASE HELP ME im hurting over here! but the thing is when the lower conotrol arm was bent i drove it and none of the vdc or slip lights were on. then when we repaired the arm it tarted these problems... any ideas?
http://xs330.xs.to/xs330/08321/img_0499266.jpg.xs.jpg (http://xs.to/xs.php?h=xs330&d=08321&f=img_0499266.jpg)
http://xs330.xs.to/xs330/08321/img_0500855.jpg.xs.jpg (http://xs.to/xs.php?h=xs330&d=08321&f=img_0500855.jpg)
PLEASE HELP ME im hurting over here! but the thing is when the lower conotrol arm was bent i drove it and none of the vdc or slip lights were on. then when we repaired the arm it tarted these problems... any ideas?
http://xs330.xs.to/xs330/08321/img_0499266.jpg.xs.jpg (http://xs.to/xs.php?h=xs330&d=08321&f=img_0499266.jpg)
http://xs330.xs.to/xs330/08321/img_0500855.jpg.xs.jpg (http://xs.to/xs.php?h=xs330&d=08321&f=img_0500855.jpg)