taka line install problem.

[sliEighty]

im installing the taka lines on my t28 and i am running into trouble when i am trying to fit one of the coolant lines between the actuator arm. i was wondering if it would harm the wastegate if i turned the arm so the bend was facing up.

[sliEighty]

can anybody help

[clark]

common problem.

either take the wastegate actuator off, then install the 90 degree line into the turbo, then reinstall the actuator. i believe "burnsauto" has done this with success.

OR

use the 90 degree end on the block, and the straight fitting on the turbo.


when i did it i was like, uhh this doesn't fit, and just flipped the coolant line around and there was much rejoicing.

[Mister.E]

yeah i used the straight fitting on the turbo and the 90 fitting on the block...it's mad simple this way.

[sliEighty]

alright sounds good thanks