tErbo b00st
07-31-2008, 05:38 PM
Selling these wheels for my bro. These wheels will not get you herra frush, but they are bitchin old school wheels for cheap. Two-peice
"I am selling four Work Stark II's. They are 16x7.5 (front) and 16x8.5(rear) ..... We believe. These wheels came on an old 240 I bought and so I don't know the exact measurements. I had to use 20 mm spacers to fit them over the 26 mm Z32 calipers in the front. So obviously the offset is undetermined too. Most likely around 35ish f/r. 4x114.3 for all you 4 luggers.
One of the rear wheels, has 3 lug holes that were pushed out to pretty much ovals because the wheel wasn't tightened down right. I have pictures of everything below.
I am asking $300obo for all of them which has decent falken ziex tread on the rear. The st615's on the front are finished.
If you want just the fronts I'm asking $200obo
Thanks"
He didn't give me many pictures, but heres what I got. I'll try and get more from him.
http://www.ziptied.com/Coppermine/albums/userpics/11270/IMG00011.jpg
The one fucked up wheel...I don't know how you would fix this, weld than redrill?
http://www.ziptied.com/Coppermine/albums/userpics/11270/IMG00013.jpg
The wheels were completely refinished a couple wheels ago, but there are now spots like this around some of the rim
http://www.ziptied.com/Coppermine/albums/userpics/11270/IMG00014.jpg
"I am selling four Work Stark II's. They are 16x7.5 (front) and 16x8.5(rear) ..... We believe. These wheels came on an old 240 I bought and so I don't know the exact measurements. I had to use 20 mm spacers to fit them over the 26 mm Z32 calipers in the front. So obviously the offset is undetermined too. Most likely around 35ish f/r. 4x114.3 for all you 4 luggers.
One of the rear wheels, has 3 lug holes that were pushed out to pretty much ovals because the wheel wasn't tightened down right. I have pictures of everything below.
I am asking $300obo for all of them which has decent falken ziex tread on the rear. The st615's on the front are finished.
If you want just the fronts I'm asking $200obo
Thanks"
He didn't give me many pictures, but heres what I got. I'll try and get more from him.
http://www.ziptied.com/Coppermine/albums/userpics/11270/IMG00011.jpg
The one fucked up wheel...I don't know how you would fix this, weld than redrill?
http://www.ziptied.com/Coppermine/albums/userpics/11270/IMG00013.jpg
The wheels were completely refinished a couple wheels ago, but there are now spots like this around some of the rim
http://www.ziptied.com/Coppermine/albums/userpics/11270/IMG00014.jpg