KAT people Post your times.....

[MyFirst240SX]

For people with forced induction KA series engines, post you quarter mile/ top end speed along with your setup.

[240racer]

My best time so far is 14.1 @ 104mph I had really crappy tires and no LSD. I also only got about 5 runs in that day, so I didn't get to practice my launches too much. Wheel spin sucks, I never bogged though. My goal was getting over 100mph so I'm happy (faster then a stock SR).
I am running a Toyota CT-26 turbo with a custom tubular stainless manifold. I have a custom FMIC with custom piping. 3" exhaust and downpipe. 370cc/min inj. and S-AFC. I was just running full rich (37%) at the time since I hadn't run on the dyno yet. I was running about 8-9 psi on those runs.
I'm rebuilding my motor right now, then I'll be running it on the dyno and getting it all tuned. I should be running low 13s this summer.

[MyFirst240SX]

Nice thats a supra turbo isn't it?

[SR240SXT]

If I'm not mistaken I'm pretty sure the CT-26 is used in the MKII MR2 Turbo's, my brother has one and I'm pretty sure I've heard him mention thats what they have.:rolleyes:

[Jeff240sx]

Well... when my car ran, it ran a [email protected] That was a barebone setup, at 4psi, with my craptacular automatic tranny.
Now I am rebuilding my engine also, and will post a new time when I get my car running.
-Jeff

[240racer]

The CT-26 I have is from a MR2 I think, the other cars it comes on is the MKIII supra and the Celica All-trac. I figure that since the supra is the coolest car I might as well use as many supra parts as possible. Also, it is for a 3l engine at 7psi making 220hp and I want to make about 250hp on a 2.4l at about 10psi and I think it's a good match for that.

[S13Grl]

Not my car, but my ex did 13.5 at 107mph (I believe) at sea level boosting 10psis, open rear end and decent tires. It was cold out.

[boosteds14]

[email protected]

that surely will be beatin this summer.:cool:

[MyFirst240SX]

this is all the KA-t's? i thought we'd have more
sean