rb20det motor and trans $500

[Shorsh]

sold.............................................. .

[s14gmo]

where you located at?

[krisdeezy]

^ +1


msglngth

[Shorsh]

hawthorne ca 90250

[driftordiemike]

whats things would i need to get it runing?

[tofubozu]

can i buy an rb20det ecu for $50? PM me

[CityHunt3R]

can you put that rb20 into a 240 s13?

[steve_o1989]

can you put that rb20 into a 240 s13?

With some work yes. You will need to buy a skyline cross member for the front or get a custom mount kit to mount the engine. I don't know what all is involved off the top of my head but if you do a search I'm sure you can find something.

[killab18]

can you put that rb20 into a 240 s13?

dont listen to steve. the rb20det drops right in. uses same mounts as the stock ka motor and sr motors. its the only rb series motor that doesnt need any further work.

the tranny mount is the same, engine mounts are the same and you can use the stock driveshaft.

and this is all first hand knowledge. I had an rb20 in my s13. didnt need any custom stuff. drop in and wire it up and your good to go.


and damn. if i wasnt moving out of town this week i would pick this up. the rb20 is a great motor.

[CityHunt3R]

how many horses compaired to the sr20?

[240meowth]

i'll pay 1k for it for this thing to be swapped into my s13 and running, know anyone who might be interested in such task?

[Oo_Skyline_oO]

dont listen to steve. the rb20det drops right in. uses same mounts as the stock ka motor and sr motors. its the only rb series motor that doesnt need any further work.

the tranny mount is the same, engine mounts are the same and you can use the stock driveshaft.

and this is all first hand knowledge. I had an rb20 in my s13. didnt need any custom stuff. drop in and wire it up and your good to go.


and damn. if i wasnt moving out of town this week i would pick this up. the rb20 is a great motor.

thats false, you need custom motor mounts and an automatic KA trani cross member or a custom made one, Mckinney Motorsports sells the kit for $300 I know because I do these swaps all the time.

[CityHunt3R]

thats false, you need custom motor mounts and an automatic KA trani cross member or a custom made one, Mckinney Motorsports sells the kit for $300 I know because I do these swaps all the time.

DUN! DUN! DUUUUUUUUUUUUUUUUUUUUUUUN!.... :confused:

whos lieing?

man i think im going ot go with blacktop instead.. anyone know w a good place to get em?

[karl wasabi]

DUN! DUN! DUUUUUUUUUUUUUUUUUUUUUUUN!.... :confused:

whos lieing?

man i think im going ot go with blacktop instead.. anyone know w a good place to get em?


Don't thread jack, and you do need a R32 cross member. It is NOT a direct bolt it in.

[RHDAmerica]

RB's go into 240's :wtf:lol you are both lyers lol hahahaha

heres a pic of my car lol

http://a973.ac-images.myspacecdn.com/images01/33/l_898d28826310492d4a29fabc9796e6b4.jpg

[Senor_Nismo]

do you know anyone that can get the wiring harness for the rb20?

[Shorsh]

all pms replied!

[Oo_Skyline_oO]

Don't thread jack, and you do need a R32 cross member. It is NOT a direct bolt it in.

hahaha actually you COULD get an R32 X-Member but the motor would sit high, shifter would be in awkward position, and you would need a custom drive shaft made, like Mark's car. Mckinney's mounts make your motor sit perfect, stock drive shaft, and its cheaper, direct bolt on(with mckiney mounts).

Pictures PLEASE!!!!!! I'll come pick it up right now if its complete enough

[dtc 360RT]

if you really wanna know, by shorsh's motor, c'mon. $500 by that SH*T!!! then contact otis at rb-peformance, boom-bam, little witches brew and poof!! instant ballah!

great price, free bump.....whats this world coming to?

[WTS3]

ship that shit to me :)

[Blackparade]

ok...everyone on here needs to get there facts straight. If you dont know what is needed to swap an rb, you shouldnt be looking to buy one, so stop wasteing his time. But here are the facts. skyline's and hillab18's facts are a little off. here are the combos you can have.
R32 corssmember+auto 240 trans mount + stock 5 speed driveshat = done
this set up does sit higher than with a mount kit, but this is what i run.
Aftermarket mount kit+5 speed driveshaft=Don
this set up allows the shifter to be centered perfectly in the whole, and sits lower.

Either way, i want more info on this motor. Mileage, compression number, leak down numbers....
thanks

[Shorsh]

sold............................