problems with car

[sergey911]

Yea so i put a new clutch and the flywheel wuz in perfect condition, and also put on the new bearing. But the car still making a weird noise and it has trouble goin up a hill and goin reverse, but it goes in gear. If anyone have any suggestions, please let me know what else it could be.

[wakdady]

you changed the throw-out bearing or the pilot bushing? can you describe the noise and when it occurs? did you resurface the flywheel or at least clean it proper?

[sergey911]

yes i changed them proper, it makes the noise when i push the clutch pedal down, it sounds kinda like a grinding sound. I bought the car like that and I thought it was the clutch and flywheel, I changed the clutch and got the flywheel resurfaced. and still same problem occured.
thanks for responding

[sergey911]

Anybody had this happen to them?

[sergey911]

Bump to the top I need help!

[wakdady]

it might be a combination of problems. did you bleed the clutch master cylinder and slave cylinder? loosing power going uphill with a new clutch and resurfaced flywheel shouldnt be happening. unless you didnt break it in proper.

[1slowS13]

is it grinding? is the clutch slipping? did you break it in properly? specify those details.

[sergey911]

I only drove the car around the neighborhood once and I drove it slow. I havent touched it since. I dont know if it's grinding but it makes a annoying sound when I push the clutch pedal down. sounds like EEEURRRRRRRRRRR!!, and no I didnt bleed the Clutch master cylinder and slave cylinder. it slipps sometimes. I just dont know why it cant make it up a hill, Do I need to replace the tranny, could it be the gear box?

thanks for responding

[wakdady]

not having the power to go up a hill shouldnt be the trans. it's made up of gears, not bands like an auto trans.
did you put some lithium grease around the output shaft and t/o bearing. if you didnt that could be the issue with the noise. my t/o bearing makes that sound when it's cold.
you can also adjust the clutch pedal to set where it engages, that might help too

[blueshark123]

that eurrrr noise is the slave cylinder

[sergey911]

Ya I put grease on the output shaft and the TOB, i'll check out the slave cylinder

thanks for responding guys

[1slowS13]

so its squeaking? does it slip when you go up hill? you have to bleed the system, and adjust your pedal. it could be already partially slipping the clutch as it sits.

[sergey911]

it's not squeaking, its making a wierd noise that sounds like and mad cat