clark
07-22-2008, 05:22 PM
pi have two sets of Z32 30MM rotors. one rotor was mounted to find that i have 26MM calipers lol. these rotors were ordered from napa for 85 bucks. they are the ultra premium version.
another set of "wearever" brand was ordered from advance auto parts. yet again these were 30MM even though i specified 1900 NA 300zx. i didn't even mount these, only opened one to find it's 30mm.....
both sets of rotors are UNUSED!
i also have a set of front JDM 180sx rotors, they are used, and need to be cut. these came with my clip and i used them for a bit until i went 5-lug
Napa 30MM rotors-$60
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2058.jpg
Wearever 30MM rotors-$50
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2054.jpg
180sx rotors-$20
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2059.jpg
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2060.jpg
below are more parts
Stainless SR20 downpipe "xs power" brand - $50
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2061.jpg
KA24DE starter. working when pulled from 1993 240sx - $50
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2057.jpg
SR20 stock flywheel. could probably use a cut - $40
SR20 nismo clutch disc/pressure plate, looks good to me with a decent amount of meat on the disc - $40
---if anyone does show any interst in the clutch/flywheel i'll post pics, but right now i'm too lazy to do it.
S13 silvia/240sx blown tein front dampers with cusco camber plates. the dampers are pretty much worthless, but the camber plates are genuine cusco. PM me if interested.
i also have JDM S13 silvia interior kick panels and the plastic rectangular shaped piece that bolts to the dash under the steering wheel, if you want one of these pieces PM me.
pm me for prices shipped.
another set of "wearever" brand was ordered from advance auto parts. yet again these were 30MM even though i specified 1900 NA 300zx. i didn't even mount these, only opened one to find it's 30mm.....
both sets of rotors are UNUSED!
i also have a set of front JDM 180sx rotors, they are used, and need to be cut. these came with my clip and i used them for a bit until i went 5-lug
Napa 30MM rotors-$60
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2058.jpg
Wearever 30MM rotors-$50
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2054.jpg
180sx rotors-$20
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2059.jpg
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2060.jpg
below are more parts
Stainless SR20 downpipe "xs power" brand - $50
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2061.jpg
KA24DE starter. working when pulled from 1993 240sx - $50
http://i198.photobucket.com/albums/aa231/unicoladron/IMG_2057.jpg
SR20 stock flywheel. could probably use a cut - $40
SR20 nismo clutch disc/pressure plate, looks good to me with a decent amount of meat on the disc - $40
---if anyone does show any interst in the clutch/flywheel i'll post pics, but right now i'm too lazy to do it.
S13 silvia/240sx blown tein front dampers with cusco camber plates. the dampers are pretty much worthless, but the camber plates are genuine cusco. PM me if interested.
i also have JDM S13 silvia interior kick panels and the plastic rectangular shaped piece that bolts to the dash under the steering wheel, if you want one of these pieces PM me.
pm me for prices shipped.