Kouki Lights - Sockets and Bulbs!

[druxxx]

Alright, well I know this has been asked before. I searched and found those posts - but none of them seemed to give any clue as to a solution or where I can find them.

I bought the Kouki Lights last week and have recieved them, now its missing 1 socket (reverse) along with 3 others (2x turn, 1x brake/parker) that have wires which have been cut to literally nothing.

I really need help!

Cheers.

[Forge_55b]

all you have to do is basically make new wires in place of what you say is down to nothing

also pictures are worth a thousand words and you don't have a thousand words so get some pictures up

[druxxx]

As you can see, i tried to pull out the right side clip but they are really held in well. No way i'll get em out without damaging them.

The wire on the left is how far down they have been cut. Really shits me, who can be this dumb to cut em like that?


http://img440.imageshack.us/img440/7885/17072008009ro3.jpg

[Sileighty_85]

http://www.rhdjapan.com/jdm-low/Nissan-180SX-Kouki-Rear-Tail-Light-Socket-Assembly-29158#

Part Numbers are

Socket Assy-RR 26556-60F00
Socket Assy-RR 26551-60F00

You'll need Two of Each one is for the outer light, the other is for the inner light, cannot remeber which is which.

As for the Reverse Light I THINK you can use the 240's Sockets?? I cant remember what I used, I had a bag of MISC light sockets mine might have been in there.

But if ya need a temp fix Auto Zone sells these Universal Sockets that will work but ya have to use small bulbs, and you cant really wire them correctly, you'd only get to use two for brake light and two for running lights, instead of using all 4 for both

Hope this helps

[druxxx]

Thanks very much.

I was hoping to be able to score the right parts second hand but look like I will have to get these! The sooner the better, i really wanna take me beast out!

[druxxx]

Surely there is another car that runs the same light bulb sockets as the kouki tail lights?