thinkin of selling my 2RZ '80 Celica

[CelicaDRIFTER]

So, i pretty much gave up on this car and really wanna build up another car. Most likely a 1Jz '91 Cressida.

This car is will get you the ladies! or ummm, guys.

Your chance to own a one of a kind, unique, awesome 1980 Toyota Celica.

Im the 2nd owner of the car, my dad is the original owner since 1980 right off the Hollywood Toyota lot.

Was used as a backround car for Fast and the Furious Tokyo Drift.
Was put aside and not used for Fast and the Furious 4, hahahhahaa.
Was backround car for an episode for the TV show Numb3rs.
Was also in a dealer brochure/ comic for the '04 Toyota Celica

Lookin to get $7000 for it As-Is.
Car is registered and was recently smogged.
Located in SoCal LA 562 area.
[email protected]

Here are the specs on the car and extras im including.
the sideskirts/ rear bumper valence are custom "one-off" they only exist on this car.

1980 Toyota Celica

Engine
- mid '90s Toyota Tacoma 2RZFE 2.4, runs strong!
- Injen intake
- generic greddy air filter
- oil filter relocation kit
- jba? headers
- custom jolly green giant corn can oil catch can. lolz. should be replaced
- stock ecu but with an Apex SAFC2 tuned by my friend Justin and also Steve Rogers of SR Motorcars
- cheapy harbor freight guages(voltmeter, water temp, oil pressure)
- all steel braided with AN fitting fuel setup
- 1.5 liter surge tank from Speed Machine performance
- 255 lph Walbro fuel pump( sucks gas from surge tank to motor)
- universal carb fuel pump from autozone( sucks gas from gas tank to surge tank)
- NGK plug wires and plugs
- SARD fuel pressure regulator
- Mooneyes fuel pressure guage
- 2.25 exh. piping to Bosal/ Brospeed muffler with resonator, No Cat.
- Volvo Setrab oil cooler with AN fittings/ steel braided lines
Before removing high flow cat. the car had, the car dyno'd at 131rwhp / 147 ft. lbs. torque
Drivetrain
- 6 puck EZ clutch
- short shifter
- W58 trans. off '85 Celica w/ W59 tacoma bellhousing bought new from Cabe Toyota
- BAKER steel braided clutch line
- '81 Toyota Supra rear end with disc brakes( car originally had rear drum brakes)
- welded diff.
Suspension
- KYB adjustable short stroke shocks ( camaro/ mr2)
- Tarmac NCRCA's(Revolver copy)
- ae86 TEIN camber plates
- Matrix(the brand) 9kg front springs
- ae86 Megan Racing tension rods
- ae86 Megan Racing rear 4 links
- Energy Suspension bushings on rear lat. bar, front/ rear swaybar endlinks, and lower arms
- ae86 Tanabe front/ rear sway bars
- ae86 rear 7kg Swift springs
Steering
- 2rz tacoma p/s pump
- '81 Celica p/s steering box
- custom steel braided p/s lines
- Ford T-Bird p/s Cooler
- more steering angle
Brakes
- ae86 front brakes, cross drilled/ slotted rotors with PBR pads
- rear stock supra rotors/ calipers
- BAKER steel braided brake lines front/ rear
- CNC cutting brake setup for use as a hydraulic e-brake
Interior
-Sparco Rev bucket seat, blue
- 6 pt cage
- passenger '84 supra seat
- Grant/ Mooneyes blue metal flake steering wheel w/ hub adapter
- Autometer 3" tach with shift light and MSD rpm activated switch wired into shift light
Stereo
- some sorta Pioneer stereo, cd player
- front Pioneer 4x6 speakers
- rear Pioneer 6x8 speakers
Exterior
- custom cowl hood, also got extra hood with a drop vent in it and another with a hood scoop over where stock carb would be on a 20R/22R
- JDM hood emblem
- JDM fender mirrors
- nissan maxima headlight conversion with 8000k HID's
- urethane 280xz front lip modded, also have the modded ae86 N2 lip im including
- knockoff modded S14 BN Sports sideskirts
- S13 URAS style rear bumper/ valence
- ae86 TRD style rear spoiler
- Mooneye's "Hot Rod" emblem on grille
- custom mariner blue(Mazda Miata) w/ frost blue pearl and blue flake paint
was in the middle of redoing the bodywork and prepping it for paint, so it needs to be repainted. also rear wheel well arches need to be welded on.
Wheels
- 15x8 +12 offset Buddy Club P1 which is rare nowadays w/ 195/50/15 Federal 535's with 99% tread(4)
- set of spacers 1.25" pair and 1" pair that have 0.25" slip on spacer on top
- set of aluminum lug nuts in anodized blue

Extras
- 2 hoods, one with drop vent, another with a hood scoop over where stock carb would be on a 20R/ 22R
- extra MAF's for 2rz, one 3 wire and one 5 wire
- OEM 2rz dipstick (using 7afe dipstick right now with shortened pipe to clear hood.)
- misc. interior/ exterior parts.
- MSD rpm pills for the RPM Activated switch that activates the shift light.
- modded AE86 N2 lip i used to have on this car. needs work.
- modiride j-blood rear fins with brackets to mount onto rear of car.
- and wutever i left out.

im keeping the pink 4 pt. harness and grenade shift knob

http://img.photobucket.com/albums/v428/CelicaDRIFTER/celica022.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/2rz002.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/2rz003.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/celica_dyno.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/celica009-1.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/celica024.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/celica014.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/stuff007.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/stuff006.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/megan4links4.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/megan4links5.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/driftbuffet12.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0053.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0050.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0051.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0036.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0037.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0035.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0095-1.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/0703081449.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/0703081450.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0175.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0176.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0177.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0178.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0179.jpg
http://img.photobucket.com/albums/v428/CelicaDRIFTER/IMAG0180.jpg

[Brian]

I have ridden in this car.
it is so fuckin rad

[MikeisNissan]

Thats a sweet looking car. Bump for you.

[Mi Beardo es Loco]

awesome ride man. My dad had that motor in his old Tacoma and it went over 250,000 miles if anyone was interested in reliability with that motor.

[DOOK]

cool car... you should keep it and be original

[CelicaDRIFTER]

selling to build something better, drifting-wise.

this car would need a rack and pinion conversion which would be a hassle for me.

[xdumbxguyx]

seen this car a bunch of times this guy puts in work!

[UfoZ8myCow]

Rad car but it looked better before the hodgepodge body kit.

I miss these days...

http://b8.ac-images.myspacecdn.com/01049/86/34/1049584368_l.jpg

http://a59.ac-images.myspacecdn.com/images01/9/l_5416445fb0281b7b28b5b3c1a0df4c4a.jpg

[CelicaDRIFTER]

im starting to too. haha

i soo need a better track car than this celica.

something with 2 more doors and with stock 2 turbo's hahahah

[SHIFT_*grind*]

I fuckin love these cars. :love:

[CelicaDRIFTER]

I have ridden in this car.
it is so fuckin rad


yeah...

someone buy BH's car too!

[CelicaDRIFTER]

still fo' sale.

[K_style]

LOOKs like BOSOZOKU as hell !!!!!!

++++++11 for you !!!

glws

[gijoe69]

I use to have a car like this but I put a 18RG that shyt pulled for a old school carb motor lol

[CelicaDRIFTER]

I use to have a car like this but I put a 18RG that shyt pulled for a old school carb motor lol


that was one swap i was gonna do a long time ago, but ended up selling the motor.

[gijoe69]

too bad my friend fried my hard drive which had my pics of my old school celica ...I love that 18RG i bought from a japanese motor warehouse ...straight pick up truck engine it pulled, it was loud, open carbs lol

[gijoe69]

i almost turbo the 18rg b4 just ended up selling the project to my friend...I had same year with celica supra rims, msd ignition,

[swayray]

do not sell... too much history involved in this build... its such a great build story i've ever read... i'd hate to see it go away...

[FaLKoN240]

Fuck, shit is so sick, I remember my first time on ZT this car blew my mind (Pit Pass)

[s13poop]

bump for richards celica

i've seen this car in person its really been taken care of

someone pick this up!!!

[Croan]

sick car!! i was on club4ag when i had my 86 for a while. i have loved this car for years. so sic. wish u the best of luck. hope it ends up in good hands : )

[DanS14RB]

Love this car man...bump for the green giant oil catch can!!
+1 for you!!!

[Addicted2Kouki]

do not sell... too much history involved in this build... its such a great build story i've ever read... i'd hate to see it go away...

word.
seriously.


but on another note, how much if its all painted and pretty?

[CelicaDRIFTER]

i dunno, 8k perhaps?

not sure.

[Hatemy7]

well I love it with the original body...those cars are freaking hard to find!!!!!!!!!!1 GL with the sale

[CelicaDRIFTER]

pic of my car back in the day in the '04 Celica dealer brochure/ comic book.


http://a842.ac-images.myspacecdn.com/images01/104/l_a6b5de674627539a255cc30bccd9f1f1.jpg

[s13poop]

my dad works for toyota

i had that magazine!!

[CelicaDRIFTER]

my dad works for toyota

i had that magazine!!

i still have it. but i dunno where the hell did that brochure went. probably lost in my house. lol

[CelicaDRIFTER]

for some stupid reason, someone keeps flaggin my ad on craigslist.

[xdumbxguyx]

hahah someone doesnt want you to sell you car... this car is bad ass buy this

[CelicaDRIFTER]

hahah someone doesnt want you to sell you car... this car is bad ass buy this


seriously, reposted twice yesterday, got flagged again, WTF?!

[CelicaDRIFTER]

just added to the car, speed bleeder brake bleeder screws and a 2lb residual check valve on the brake lines between the hydro ebrake and rear brakes