PDA

View Full Version : FS: R32 GTR turbos


Filma
07-14-2008, 05:50 PM
price is OBO but NO LOW BALLS.. $700 for 2 - or $375 for 1

MY E-MAIL: [email protected]



R32 GT-R turbo's with 25k on them no shaft play (front to back) there is a VERY small HAIR side to side but in great condition..no nick's on the blade's the price is OBO.
there T25/T28 with a T2 flange
(manifolds and elbows can be add'd into the deal) just ask water lines and oils go with them


Car of Origin: Nissan Skyline R32, R33 GT-R
Engine: RB26DETT
Flange: Four-bolt, the same as the T25 series
Max. Power Rating: Approximately 150kW
Max. Boost: 1.3bar (18.8psi)
Cover Size: Exhaust 0.48 AR, compressor 0.60 AR
Comments: They are really only good for use on stock GT-R engines due to their relatively small exhaust (http://zilvia.net/f/showthread.php?t=48255&highlight=gtr+t28+t25+rb26dett#) housing. For some reason, they seem to be able to handle more boost before turbine failure, but there are still plenty that have let go.
Cost: Anything with a GT-R part number is expensive!
Rating: Two out of five




will ship at your cost!!!!!!:mepoke:

http://img385.imageshack.us/img385/4198/1182111dz9.jpg
http://img385.imageshack.us/img385/4198/1182111dz9.3751b21c86.jpg
http://img211.imageshack.us/img211/2013/1182114io3.jpg
http://img211.imageshack.us/img211/2013/1182114io3.c8a6608e58.jpg

Filma
07-15-2008, 06:59 PM
bump for today

dookiedang
07-15-2008, 08:24 PM
what sizes are those? are they better than s15 turbo?

Filma
07-15-2008, 10:18 PM
there T25/T28 with a T2 flange... i dont know if they are if they are better

Filma
07-16-2008, 10:04 PM
bump for today

Filma
07-18-2008, 12:27 PM
bump and i am open to trades

jrbump
07-18-2008, 12:36 PM
Good friend of mine, honest seller.

Better stop bumping it though.