WTB: Allot of s13 / ka-t things...

[Snoopy]

I need the following, in NO type of order::

Everything for a sohc to dohc swap (PS lines, Intake mani)
S14 pass side LCA
Front + rear Strut tower bar (good quality stuff.. not junk)
JDM coupe side skirts (OEM, no fiberglass junk)

KA24DE(T) INTERNALS (Aftermarket cams, valves, springs, pistons, rods, ETC)

S13 coilovers (Might just get D1s)
S13 CS exhaust // 3 inch stock looking non attention getting exhaust
S13 RUCA (Aftermarket, no ebayjunk)
S13 1 peice driveshaft (ABS, 5 spd, ALUM ONLY)
S13 Red/Clear aftermarket coupe tails
Front mount kit // piping (Ka-t, but its basically a sr style setup, you get my drift~)

and anything else you can think of?


Chris Robbins
540-834-6832 YOU NEED ME, CALL ME!
Fredericksburg, VA

[BenArtM80]

I have the following:

one piece steel driveshaft, <5000 miles, a little surface rust on the u-joints, but in good shape otherwise. It is for non-abs, but the difference in length is only 0.75" and there is usually enough play in the drivetrain to allow for it. I used it with a j30 diff (which needs to have an abs driveshaft) without any problems $225 shipped

pass side pop-up cover $35 shipped

s13 radio bezel $55 shipped

DOHC complete PS setup $125 shipped

If you want everything, I can ship the bottom three items together to save a few bucks, but the driveshaft will have to be shipped separate. For everything, I could do $400 shipped. Let me know

[s13silvia123]

i have a greddy cold pipe but no 90 degree elbow you can just buy a 3 inch 90 degree coupler for a FMIC. $75 shipped

[DALAZ_68]

i have an ign coil and starter module on braket working condition...lemme know

[vutony]

http://www.zilvia.net/f/showthread.php?t=201018

[grnappletree14]

i have a s13 ecu and maf if needed

[Skee]

i have pistons pm me

[Snoopy]

Pm'd ppl!

sadgasdga

[90S13dude]

I have the cluster bezel with the switches. $30 shipped.

[Snoopy]

Should be getting most of my stuff locally sat, ill update. But keep letting me know what you all have, Im getting interested in some ppl's offers of internals

[lordofthemiasma]

need injectors? i have nismo 555's

[phi_ho1]

no price here

[Snoopy]

no

and..........

huh

[Skee]

shot me a offer for my pistons i need money

[flawlessflo3190]

check out my turbo

[Snoopy]

Updated stuffs!

[93SECoupe]

Hi I got an RPS Street Max clutch for a KA24DE pm me if your interested. The cluth is rated at 400lb torque.

[KA-T_240]

I have a 3 inch Downpipe for a top mount turbo manifold. 5-bolt garrett flange.