PDA

View Full Version : rb25 and lots of parts 400+whp


aaronlosey
07-01-2008, 04:27 PM
i have a 400+whp rb25 setup i'm parting out of my skyline. its an r33 drivetrain, with lots of parts on it.

it has a r33 rb25 longblock with hks head gasket, head studs
greddy rb25 intake manifold and also stock intake manifold
hks 2835 pro s turbo with a matching downpipe for the turbo
nismo copper mix clutch/flywheel package
rb25 tranny
rb25 engine wiring harness
power fc stand alone ecu with hand controller
stock rb25 ecu
a couple of pod air filters
z32 maf
rb25 maf
6x370cc injectors (it was tuned for 740s but i took them out and used them)
r33 driveshaft
nismo fuel pressure regulator
after market fuel pressure guage
stock exhaust manifold
random electric fans to fit the rb swap in an schassis



there are lots more little parts that i'm sure i'm forgetting. it was tune for 1.3 bar on pump gas and made 400+whp, can easily be turned up to high 400s at the wheels with this turbo. the power fc is already tuned for 740cc injectors and this turbo, with the z32 maf. just toss everything together, check the tune, and go dorifto it.

i'm looking for $4k for everything together. the drivetrain is still in my skyline and will be pulled shortly.

also all the aftermarket parts have less than 2 days of drifting on them, as the skyline was damaged almost immediately after putting it together and we never bothered to play with it again.

Syncade
07-01-2008, 04:57 PM
Willing to part? Ill take that fpr and gauge and IM

fliprayzin240sx
07-01-2008, 05:13 PM
$4k for all that should be considered armed robbery in most states...

flawlessflo3190
07-01-2008, 05:31 PM
part out ?? i need the maf and some other odds and ends

champagnes13
07-01-2008, 09:08 PM
free bump for dealing with my interrogation at nopi e-town

xxnak219xx
07-26-2008, 12:59 PM
Have you sold everything yet?... And if not are you willing to part out?