s14 vss...

[Zero_X]

ok so i have a 98 s14 with a s13 tranny..speed is reading double of what it is..i know i have to switch out the vss but should it be s14 vss or s13 since its a s13 tranny?? help anyone?

[projectRDM]

We always suggest for someone to search, since I seem to type this weekly.

VSS must match the cluster. Nothing else matters. Transmissions are the same from 89-98, you don't have an 'S13 transmission', you have a transmission removed from an S13.

[Zero_X]

thanks...appreciate it..

[issac]

I figured instead of creating a new thread i can just threadhustle this one. I just completed an auto to manual swap in my 95 using s13 tranny. My Q is I purchased a new s14 vss that came without the gear can I transfer the gear from the s13 vss? I searched but can not find the correct answer. I know this topic is covered to death but the info is sketchy.

[UNISA JECS]

I figured instead of creating a new thread i can just threadhustle this one. I just completed an auto to manual swap in my 95 using s13 tranny. My Q is I purchased a new s14 vss that came without the gear can I transfer the gear from the s13 vss? I searched but can not find the correct answer. I know this topic is covered to death but the info is sketchy.

No you cannot swap the pinion gear from a S13 to S14 or vice versa, and you cannot use a auto pinion gear on a manual speed sensor and vise versa.

[issac]

Thanks UNISA. much needed info. nuffrespect.

[onepuff]

Also the 89-98 trans are not the same exactly. You'll be missing the cranks position sensor. S14 have one S13 don't. OP you will have a CEL without it.

[issac]

I realized that a little too late. Any possible ways to get around that (trick wiring etc...?) For CEL purposes only.