s13 power steering line thread pitch on pump, anyone know?

[samplesurf]

ok so im making my own high pressure line since i already have all the stuff to make AN lines but i need to know the thread and pitch for the bolt thats on the line connecting to the pump, circled in red here, the other ones on the rack i believe are 16mmx1.5 so correct me if im wrong. i just need to know what that one is, any help is appreciated

[xsparc]

14x1.5

there is a thread about this already that has all the parts and sizes

[samplesurf]

14x1.5

there is a thread about this already that has all the parts and sizes

any link to this thread i couldnt find anything searching

[Suk02Si]

http://www.zilvia.net/f/showthread.php?t=186291

16x1.5

http://www.anplumbing.com/shop/index.php?shop=&dept=Metric

9919DFJ, 16MM X 1.5, -6, Metric thread male to AN adapter male.

[samplesurf]

thanks for the feedback, so if the 16mmx1.5 is what goes into the pump then what thread are the ones that are on the rack?

[Suk02Si]

from what I found from digging around, 16x1.5 is the pump and 1.1.5 is the rack. You might want to double check though.

Here's another thread I found:
http://www.zilvia.net/f/showthread.php?t=169550

[samplesurf]

thanks that tells me everything i needed to know