ch1873857
06-23-2008, 07:58 PM
OK. So i got an offer that i couldnt refuse now i am forced to sell my motor. the motor is still in the car but thats no problem. some history. i bought it 3 years ago from STI. it was a clip that i paid 2200 for. it was auto so it wasnt beaten on. maintainence records were plastered all over the engine and glove box. it was taken car of. the last record was a auto tranny flush at 124k kilos. i swapped in a fresh s14 sr tranny into the ca bellhousing and only drove it a total of 2 or 3k miles. i kept breaking **** (turbos, mafs, etc) nothing mechanical. the car ran beast. and as soon as i get a scanner i can show you that it made ~215whp at 7-9psi. on 450cc injectors an s14 turbo and boost leaks everywhere.
after that dyno run i fried the ecu and ditched everything. went with megasquirt
so im selling you a motorset (ca18 longblock, s14sr tranny)
megasquirt 2 pcb 3.57 (the best one there is)
a MS harness, prebuilt for the car
all the necessary EDIS 4 components trigger wheel vr sensor and all.
all the rest of the MS sensors needed with plugs already wired into the harness
all you need is a turbo, injectors, wideband, and a few other small things
will come with a CAST exhaust manifold and a stainless.
SS turbo lines. oil and water.
custom made sparkplug valley cover with the edis coil mounted.
the MS needs to be finished and i wouldnt recommend going to stock because you will need a lot of parts. CAS is gone. however i will throw in a set of stock coil packs for ****s and giggles.
sorry the gt28r stays with me and the motor thats going in :yes:
the motor will have a brand new water pump and timing belt from nissan with 0 miles on it.
i can deliver for extra if i have to. buy me gas and food, and i'll be happy. depends on how far i have to drive
here is how im pricing everything
650 - strong CA longblock, with CA bellhousing if you want to use your tranny
400 - trans. i can always use them, dont NEED to sell it.
500 - for EVERYTHING megasquirt
prices are negotiable. hit me up on [email protected] or 304-886-4457
valve covers are being powdercoated along with the coilcover. i told him to hold off or least take his time on the prep so if you do buy the motor you have a choice on which color they will be coated. sweet deal. no extra charge.
http://i238.photobucket.com/albums/ff310/megasquirtCA/850A0040.jpg
http://i238.photobucket.com/albums/ff310/megasquirtCA/DSC02659.jpg
more will come to update.
pack deal of 1300 takes EVERYTHING
what is left to be done and what is done
what is done:
the DB37 harness pig tail has been trimmed down. it is wired to the plug for power, so are the injectors, comes behind the dash to where the ecu and EDIS ignition module are mounted (were supposed to go inside the glovebox) all wires to tach, ect. done.
all interior wiring done.
in the engine bay. all the grounds are collected to be mounted into the side of the plenum as stock. the injectors are wired but need clips. the plug for the ignition coil is wired (needs the resistor but i will throw that in) the vr sensor and temp sensors are wired in
what needs to be done:
fuel pump relay. a pink wire that goes to a certain wire down by the fuse box. easy. just never did it.
o2 wire. 5 volt input from your wideband. never got a wideband so i never wired it in. easy.
the wire loom is 95% done and a dumbass could finish it.
*EDIS INCLUDES*
edis 4 module (the brain)
coilpack
plug wires
vr sensor
trigger wheel
missing anything?
it comes with everything needed
the trigger wheel needs mounted to the crank. and a vr sensor bracket needs to be made but i have access to machining equipment and i am willing to help you out with this.
this setup will allow you to pick and choose how much power you want. since it does not include injectors or a turbo. maf is not needed!!!
i personally run a s15 gt28r bb with 550cc injectors. the gt28r is still on there but like i said will come off and go on the new motor. i will include the stock manifold and the stainless, and the elbow and dp will also be included as well!!
i will take care of you, give you the parts that you need (that i have) to get you rolling. all you need is $$. thats is what i lacked and why the car sat.
http://i238.photobucket.com/albums/ff310/megasquirtCA/CIMG0412.jpg
http://i238.photobucket.com/albums/ff310/megasquirtCA/CIMG0410.jpg
http://i238.photobucket.com/albums/ff310/megasquirtCA/CIMG0409.jpg
http://i238.photobucket.com/albums/ff310/megasquirtCA/CIMG0407.jpg
after that dyno run i fried the ecu and ditched everything. went with megasquirt
so im selling you a motorset (ca18 longblock, s14sr tranny)
megasquirt 2 pcb 3.57 (the best one there is)
a MS harness, prebuilt for the car
all the necessary EDIS 4 components trigger wheel vr sensor and all.
all the rest of the MS sensors needed with plugs already wired into the harness
all you need is a turbo, injectors, wideband, and a few other small things
will come with a CAST exhaust manifold and a stainless.
SS turbo lines. oil and water.
custom made sparkplug valley cover with the edis coil mounted.
the MS needs to be finished and i wouldnt recommend going to stock because you will need a lot of parts. CAS is gone. however i will throw in a set of stock coil packs for ****s and giggles.
sorry the gt28r stays with me and the motor thats going in :yes:
the motor will have a brand new water pump and timing belt from nissan with 0 miles on it.
i can deliver for extra if i have to. buy me gas and food, and i'll be happy. depends on how far i have to drive
here is how im pricing everything
650 - strong CA longblock, with CA bellhousing if you want to use your tranny
400 - trans. i can always use them, dont NEED to sell it.
500 - for EVERYTHING megasquirt
prices are negotiable. hit me up on [email protected] or 304-886-4457
valve covers are being powdercoated along with the coilcover. i told him to hold off or least take his time on the prep so if you do buy the motor you have a choice on which color they will be coated. sweet deal. no extra charge.
http://i238.photobucket.com/albums/ff310/megasquirtCA/850A0040.jpg
http://i238.photobucket.com/albums/ff310/megasquirtCA/DSC02659.jpg
more will come to update.
pack deal of 1300 takes EVERYTHING
what is left to be done and what is done
what is done:
the DB37 harness pig tail has been trimmed down. it is wired to the plug for power, so are the injectors, comes behind the dash to where the ecu and EDIS ignition module are mounted (were supposed to go inside the glovebox) all wires to tach, ect. done.
all interior wiring done.
in the engine bay. all the grounds are collected to be mounted into the side of the plenum as stock. the injectors are wired but need clips. the plug for the ignition coil is wired (needs the resistor but i will throw that in) the vr sensor and temp sensors are wired in
what needs to be done:
fuel pump relay. a pink wire that goes to a certain wire down by the fuse box. easy. just never did it.
o2 wire. 5 volt input from your wideband. never got a wideband so i never wired it in. easy.
the wire loom is 95% done and a dumbass could finish it.
*EDIS INCLUDES*
edis 4 module (the brain)
coilpack
plug wires
vr sensor
trigger wheel
missing anything?
it comes with everything needed
the trigger wheel needs mounted to the crank. and a vr sensor bracket needs to be made but i have access to machining equipment and i am willing to help you out with this.
this setup will allow you to pick and choose how much power you want. since it does not include injectors or a turbo. maf is not needed!!!
i personally run a s15 gt28r bb with 550cc injectors. the gt28r is still on there but like i said will come off and go on the new motor. i will include the stock manifold and the stainless, and the elbow and dp will also be included as well!!
i will take care of you, give you the parts that you need (that i have) to get you rolling. all you need is $$. thats is what i lacked and why the car sat.
http://i238.photobucket.com/albums/ff310/megasquirtCA/CIMG0412.jpg
http://i238.photobucket.com/albums/ff310/megasquirtCA/CIMG0410.jpg
http://i238.photobucket.com/albums/ff310/megasquirtCA/CIMG0409.jpg
http://i238.photobucket.com/albums/ff310/megasquirtCA/CIMG0407.jpg