PDA

View Full Version : Boost Stutter?


bfeng24
06-23-2008, 11:20 AM
I have a 240 with an sr20 swap, it drives ok, when i reach higher rmps in each gear it seems to stutter (around 7-10 psi), its not really a hesitation. I just replaced the maf with a z32 but that did not help. Any suggestions?
Thanks

turns101
06-23-2008, 11:31 AM
Get back to the basics

Plugs, wires, timing
Fuel filter
air filter

Check all of that forst.

Are you having any CEL codes?

clark
06-23-2008, 11:51 AM
when you swapped in a z32 maf, did you do anythign to compensate for the different pinning ?

but what was already stated, start with the basics. sounds fuel or timing related.

Z U L8R
06-23-2008, 12:04 PM
sounds like you're blowing out spark. lower the plug gap to .028 you should be running an ngk bcpr7es or bkr7e.

Dave

SuicidnS13
06-23-2008, 05:18 PM
Sounds like either a boost leak or spark blow out.

DirtyS14
06-23-2008, 09:17 PM
sounds like you're blowing out spark. lower the plug gap to .028 you should be running an ngk bcpr7es or bkr7e.

Dave

Yep thats exactly the problem I had. Plugs were too hot. I put in some bkr7e plugs and problem went away, runs great now.

Definitely try getting some colder plugs.