UNISA JECS
06-21-2008, 02:38 PM
For sale J30 6 (2x3) bolt VLSD outputs shafts
These will allow you to retain your stock 6 (2x3) bolt pattern axles on your S13 by swapping out the 5 bolt VLSD output shafts with these 6 (2x3) bolt pattern output shafts.
Its common practice that people sometimes use J30 5 bolt axles to avoid having to purchase 6 (2x3) bolt output shafts from the dealer which will run you $500 for both sides. I can tell you that if you decide to use J30 5 bolt axles only the driver side axle works while the passenger side is to long and should never be used on a S13 because of the potential for binding as it is on the passenger side there is virtually no room to begin with if you are using a J30 passenger side axle on your S13.
NOTE: S14 owners should be able to use J30 5 bolt axles on both sides so no need to swap outputhafts unless you want to keep your stock axles or have a hard time finding 5 bolt axles, its up to you.
***I dont wanna hear I use J30 axles on my S13 and there fine unless you physically pulled both axles yourself and tried installing them on the passanger side which I have more than once and they do not fit, there are to tight. The only 5 bolt axles you can use on your S13 that will work on the passanger side would be JDM S13 5 bolt axles.
http://i167.photobucket.com/albums/u159/zilvia_album/P1260001.jpg
http://i167.photobucket.com/albums/u159/zilvia_album/P1260002-1.jpg
http://i167.photobucket.com/albums/u159/zilvia_album/P1260003.jpg
Price $134 shipped within USA via USPS Priority mail
These will allow you to retain your stock 6 (2x3) bolt pattern axles on your S13 by swapping out the 5 bolt VLSD output shafts with these 6 (2x3) bolt pattern output shafts.
Its common practice that people sometimes use J30 5 bolt axles to avoid having to purchase 6 (2x3) bolt output shafts from the dealer which will run you $500 for both sides. I can tell you that if you decide to use J30 5 bolt axles only the driver side axle works while the passenger side is to long and should never be used on a S13 because of the potential for binding as it is on the passenger side there is virtually no room to begin with if you are using a J30 passenger side axle on your S13.
NOTE: S14 owners should be able to use J30 5 bolt axles on both sides so no need to swap outputhafts unless you want to keep your stock axles or have a hard time finding 5 bolt axles, its up to you.
***I dont wanna hear I use J30 axles on my S13 and there fine unless you physically pulled both axles yourself and tried installing them on the passanger side which I have more than once and they do not fit, there are to tight. The only 5 bolt axles you can use on your S13 that will work on the passanger side would be JDM S13 5 bolt axles.
http://i167.photobucket.com/albums/u159/zilvia_album/P1260001.jpg
http://i167.photobucket.com/albums/u159/zilvia_album/P1260002-1.jpg
http://i167.photobucket.com/albums/u159/zilvia_album/P1260003.jpg
Price $134 shipped within USA via USPS Priority mail