clutch problem

[onesloka]

I went out to start my car today and when i pushed the clutch pedal in it seemed to feel different, but car drove normal. I drove to work fine but when I got off and started my car the pedal just sunk to the floor.:wtf:
The clutch usually will engage or disengage when the pedal is getting close to being at the top. Now it only will ALL the way at the bottom and it seems to stay there for a second and slowing come back up. I have no leaks and never had air in the line. It is getting to where i can't shift hardly. How do i check to see if its my master or slave cylinder?

[chetacheese]

have someone depress the pedal inside the car while someone else goes under and look to see the slave push rod is engaging.

[onesloka]

have someone depress the pedal inside the car while someone else goes under and look to see the slave push rod is engaging.


its engaging but it looks to be about 3/4 inch to 1 inch. is this normal?

[tt99ol]

master cyl
the slave would leak or not move at all with a stiff pedal if it were the problem

[s13silady]

master cyl
the slave would leak or not move at all with a stiff pedal if it were the problem


yuhp i had the same problem.. ended up being my master cylinder.

[TurboNetic05]

change master and slave together

[onesloka]

okay thanks guys. i have a new master that i just came across for free. but don't have the money for slave. im really broke at the moment

[TurboNetic05]

ya... you can get em pretty cheap. like 60 bucks. but its not necessary to do them both anyways.

[xsparc]

okay thanks guys. i have a new master that i just came across for free. but don't have the money for slave. im really broke at the moment

i think spl has them for cheaper

[clark]

if you're really that broke, buy a rebuild kit and rebuild the slave.

[onesloka]

i called carquest today and got new master and slave for $40 with lifetime warranty. for some odd reason they sold them to me at cost. when i got the reciept it should have been around $70 after tax. no complaints:)