PDA

View Full Version : five speed swap info


Pblesh85
06-17-2008, 01:49 AM
Ok im doing my five speed swap on my s13 coupe with a s13 black top sr(I know, I know... auto sr??? It was cheap) this friday. I have been reading up on the swap alot and what is needed in doing so. I have every thing that I need I think... I have seen on alot of posts that you need a hard line for the clutch. Now I have a nismo clutch line and a agency power line(the one that goes all the way to the master cylinder) but am not sure what hardlines I need.

Can someone post a pic of them so I know what to buy. And also can you buy them at a local parts store or dealer ?

Parts that I have:
5 speed sr trans
5 speed starter
new clutch and flywheel kit
clutch and flywheel bolts(new)
manual drive shaft(will the auto drive shaft bolts work on this)
cross member
nismo mounts
clutch and brake pedals
nismo clutch line and a agency power line
clutch master cylinder
rubber shift boot and plate
the piece that goes around the drive shaft

Im pretty sure I have everything but I just want to double check with you guys. I did my research and am confident but once again, am just sorting out any last minute questions.

Thank you for any help.

Nismospec19
06-17-2008, 01:53 AM
try this link
5 Speed swap (http://my240.epijunkie.com/Automatic_to_Manual_Transmission_Swap_with_engine_ still_in_the_S13_body.)
good luck

ill be doing the same very soon lmk how urs goes

Pblesh85
06-17-2008, 09:25 AM
thanks for the link, it has some good stuff on it.

jarredd
06-17-2008, 09:49 AM
try these links as well if you havent already... came in handy when i was piecing together my swap...

http://www.nicoclub.com/articles.php?id=210410


http://www.nicoclub.com/articles.php?id=183606

Pblesh85
06-17-2008, 10:28 AM
here are the part numbers for the lines. im not sure what one I need. My motor is 94'-96' (s13 black top) and my car is a 93'. Anyone know or have the same issue ?

Clutch hard line
30850-40F00=93 and up
30850-54F00=89-92

Pblesh85
06-17-2008, 11:24 AM
ok, apparently I do have the line. the agency power line I have is made to eliminate the hardline setup.

thank you for the links, they helped.