z32 brake upgrade--need cylinder with flare middle fitting in it already.

[JTunedMotorsports]

ok I am going to use the 17/16 master and want to know what brands to order that come with the flare middle fitting pre-installed this is need when putting the master cyl on a non-abs s13..i do not feel like cutting my stock s13 master apart and putting the fitting in my z32 one, or paying $240~ for a master cyl from other dist....i heard some part brands came with the fitting in them after u took out the hex middle plug...also i own a shop and can get aftermarket masters from like autozone type dist and others since we use them for parts.

thanks

Jim

[Def]

Nabco's come with the flare seat in the middle port, Tokico's don't.

[JTunedMotorsports]

Nabco's come with the flare seat in the middle port, Tokico's don't.
thanks im going to order one today and see..rep pts for u

[g6civcx]

http://www.zilvia.net/f/showthread.php?t=159124

Specify 17/16" and non-ABS when you order.


Sidenote: I have braided lines, which means in a pinch I can use ABS BMCs if needed, with the appropriate fittings of course to distribute to front left/right calipers.

[clark]

they also make this:

http://cgi.ebay.com/ebaymotors/BRAKE-MASTER-CYLINDER-ADAPTER-FITTING-300ZX-Z32-S13-S14_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 QQcategoryZ33566QQihZ011QQitemZ320263425663QQrdZ1Q QsspagenameZWD1V

[JTunedMotorsports]

they also make this:

http://cgi.ebay.com/ebaymotors/BRAKE-MASTER-CYLINDER-ADAPTER-FITTING-300ZX-Z32-S13-S14_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 QQcategoryZ33566QQihZ011QQitemZ320263425663QQrdZ1Q QsspagenameZWD1V
thanks idid see this..

[JTunedMotorsports]

JUST in..i just got off the phone with my parts dist and have a few that arrived to my shop...brand new....cheap and with fitting installed...if anyone needs any let me know $135.00 SHIPPED !!!!

[JTunedMotorsports]

I just got 5 more in today..call asap if you want one..484-614-8595

[rightcoastimports]

got any pics of it installed??

[dued]

I also suggest NABCO. It's plug and play.

[JTunedMotorsports]

its all plug in play buddy

[infinitexsound]

i just went to pick n pull and used a z31 MC

[idlafie]

ImportNut's website......it will answer all your questions about the Z32 swap.

http://importnut.net/300zxbrakeswap.htm

ID

[Inland180]

they also make this:

http://cgi.ebay.com/ebaymotors/BRAKE-MASTER-CYLINDER-ADAPTER-FITTING-300ZX-Z32-S13-S14_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 QQcategoryZ33566QQihZ011QQitemZ320263425663QQrdZ1Q QsspagenameZWD1V

great find! Im sure alot of peeps here will need this! I once did , I wish i would of seen this

[brndck]

they also make this:

http://cgi.ebay.com/ebaymotors/BRAKE-MASTER-CYLINDER-ADAPTER-FITTING-300ZX-Z32-S13-S14_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 QQcategoryZ33566QQihZ011QQitemZ320263425663QQrdZ1Q QsspagenameZWD1V

just fyi, i ordered this and its the one i got was entirely wrong. it threaded into the bmc fine, but the side for the brake line to thread into was the wrong size. i ended up hacking apart my old bmc. chisel + hacksaw + bfh = ftw!

[UNISA JECS]

they also make this:

http://cgi.ebay.com/ebaymotors/BRAKE-MASTER-CYLINDER-ADAPTER-FITTING-300ZX-Z32-S13-S14_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 QQcategoryZ33566QQihZ011QQitemZ320263425663QQrdZ1Q QsspagenameZWD1V

great find! Im sure alot of peeps here will need this! I once did , I wish i would of seen this

just fyi, i ordered this and its the one i got was entirely wrong. it threaded into the bmc fine, but the side for the brake line to thread into was the wrong size. i ended up hacking apart my old bmc. chisel + hacksaw + bfh = ftw!

Just to add to this (besides what brndck has found, maybe that was just a mistake who knows), if you have a S13 KA24DET with bottom mount manifold dont even think about this, you'll have no room for any type of extension from the master cylinder, its already tight as hell there.

[JTunedMotorsports]

good info guys

[Sir]

drill from opposite side, than punch it out. no need to dremel it out.

[Jtuned_andy]

We are going for units that come from the store with the fitting trying to save the hacking to a min

[UNISA JECS]

I throw some more info in here to as far as the flare fitting goes, since it has been a while I dont recall which is larger but if using a NABCO BMC make sure to use NABCO flare fittings, same holds true for TOKICO, they are different and in one combination of mix-matching them you will see it will not press in snugly.

Also if you are going to hack up a BMC check to make sure its teh correct make TOKICO vs NABCO and second make sure that it has the press fitting flare fittings aka removeable type......not all TOKICO and NABCO has these type flares some are build cast into the master meanings its not removeable.

IMO best thing is to buy a BMC with the middle flare already installed saves time and headaches.

[JTunedMotorsports]

We are going for units that come from the store with the fitting trying to save the hacking to a min
yup thats what I FINALLY found..

[JTunedMotorsports]

[

update: here are pics of 17/16 master cylinder
http://good-times.webshots.com/album/563819567qtxeTw

[Phlip]

This has gone way commercial, please view this:
http://www.zilvia.net/index.php?page=advertise