McPatrick
06-15-2008, 05:17 PM
ok here is the deal...
i purchased this hatchback a few months ago to build and use as a track car... built engine, stripped out chassis, started building cage.. ect ect I put a little more than 6k into the car and well money is a bit tight right now so i am deciding to sell what I have up to this point. willing to part out, would love to sell it as a whole if possible. 95% of the parts below are new - all engine work was done in febuary by whittens machine shop located in lewisville, tx in feb/march
Some parts are listed with individual prices, at the top of each category there are prices to buy parts in packages...
$4500 takes everything!!!!
Engine - 91 DOHC KA - $1300 block/head (no clutch,turbo,inj,IC) $2700 complete w/everything listed below
- Block: vat dipped, decked, bored .020" over, shot peened
- Head: vat dipped, decked, pressure tested
- CP forged pistons CR 9.0:1, .020" oversized
- cut/balanced crank
- Clevite Bearings (oversized)
- Nissan Gasket set
- ARP head studs
- Oil pan modified for 5/8" oil return
- Stripped Intake manifold of all emissions devices. secondary butterflies ect.
- Tomei 550cc Injectors - $350
- Z32 MAFS - $75
- Walbro 255lhp Fuel Pump - $50
- RevHard Cast top mount manifold - $150
- 50T T3/T04e - $300
- 38MM Turbonetics evo wastegate - $175
- ATPturbo 5 bolt 2.5" to 3" flange
- ATPturbo 38mm wastegate flange w/ 1.5" dump tube
- Custom turbo outlet pipe
- ClutchMasters Stage 5: 6puck unsprung clutch kit *still in box* - $250
- Resurfaced OE Flywheel
- Midmount Intercooler w/ custom made IC piping - $100
- OE KA radiator w/ shroud
- Clutch Fan
Chassis - $800 chassis w/cage (no wiring/megans) or $2000 complete as listed below
- 1989 S13 Hatchback - clean no rust/rot, no major body damage, some small small dings (normal 19yo car stuff), no sunroof, power windows, wingless hatch
- cage: 1 5/8" tubing w/ seat back support *door bars not installed yet*
- Stipped interior of all carpet, wiring, hvac ect.
- Painless Wiring 12 Circuit harness w/ 8 switch Panel - $350
- rear quarters have been cut/folded for overfenders
- 5 lug front/rear *not installed yet* - $150
- Z32 front calipers *not installed yet* - $150
- Megan Street Coilovers - $650
- welded diff
AERO -
- 50mm rear overfenders - $100
- 30mm Duel vent front fenders - $100
- BN sports rear bumper *new unpainted* - $250
- Uras Front bumper *pending sale* - $100
- Uras Sides *pending sale* -$100
im sure im forgetting some stuff.... pictures below (sorry for cell/digi mix) more pics coming later
http://i28.photobucket.com/albums/c231/strustx/projects13/P1010183.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/P1010206.jpg *covers were made to cover previous owners intercooler holes*
http://i28.photobucket.com/albums/c231/strustx/projects13/P1010232-1.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/P1010177
.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/hoodandovers.jpg hood and rear overs
http://i28.photobucket.com/albums/c231/strustx/projects13/ka.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/ka2.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/ka3.jpg
any questions please feel free to ask via pm
i purchased this hatchback a few months ago to build and use as a track car... built engine, stripped out chassis, started building cage.. ect ect I put a little more than 6k into the car and well money is a bit tight right now so i am deciding to sell what I have up to this point. willing to part out, would love to sell it as a whole if possible. 95% of the parts below are new - all engine work was done in febuary by whittens machine shop located in lewisville, tx in feb/march
Some parts are listed with individual prices, at the top of each category there are prices to buy parts in packages...
$4500 takes everything!!!!
Engine - 91 DOHC KA - $1300 block/head (no clutch,turbo,inj,IC) $2700 complete w/everything listed below
- Block: vat dipped, decked, bored .020" over, shot peened
- Head: vat dipped, decked, pressure tested
- CP forged pistons CR 9.0:1, .020" oversized
- cut/balanced crank
- Clevite Bearings (oversized)
- Nissan Gasket set
- ARP head studs
- Oil pan modified for 5/8" oil return
- Stripped Intake manifold of all emissions devices. secondary butterflies ect.
- Tomei 550cc Injectors - $350
- Z32 MAFS - $75
- Walbro 255lhp Fuel Pump - $50
- RevHard Cast top mount manifold - $150
- 50T T3/T04e - $300
- 38MM Turbonetics evo wastegate - $175
- ATPturbo 5 bolt 2.5" to 3" flange
- ATPturbo 38mm wastegate flange w/ 1.5" dump tube
- Custom turbo outlet pipe
- ClutchMasters Stage 5: 6puck unsprung clutch kit *still in box* - $250
- Resurfaced OE Flywheel
- Midmount Intercooler w/ custom made IC piping - $100
- OE KA radiator w/ shroud
- Clutch Fan
Chassis - $800 chassis w/cage (no wiring/megans) or $2000 complete as listed below
- 1989 S13 Hatchback - clean no rust/rot, no major body damage, some small small dings (normal 19yo car stuff), no sunroof, power windows, wingless hatch
- cage: 1 5/8" tubing w/ seat back support *door bars not installed yet*
- Stipped interior of all carpet, wiring, hvac ect.
- Painless Wiring 12 Circuit harness w/ 8 switch Panel - $350
- rear quarters have been cut/folded for overfenders
- 5 lug front/rear *not installed yet* - $150
- Z32 front calipers *not installed yet* - $150
- Megan Street Coilovers - $650
- welded diff
AERO -
- 50mm rear overfenders - $100
- 30mm Duel vent front fenders - $100
- BN sports rear bumper *new unpainted* - $250
- Uras Front bumper *pending sale* - $100
- Uras Sides *pending sale* -$100
im sure im forgetting some stuff.... pictures below (sorry for cell/digi mix) more pics coming later
http://i28.photobucket.com/albums/c231/strustx/projects13/P1010183.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/P1010206.jpg *covers were made to cover previous owners intercooler holes*
http://i28.photobucket.com/albums/c231/strustx/projects13/P1010232-1.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/P1010177
.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/hoodandovers.jpg hood and rear overs
http://i28.photobucket.com/albums/c231/strustx/projects13/ka.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/ka2.jpg
http://i28.photobucket.com/albums/c231/strustx/projects13/ka3.jpg
any questions please feel free to ask via pm