Ohio/NKY guys? Roll call!

[Somnambulist]

I didn't see one for Ohio and Northern Kentucky people.

I know of some of you on here. Who are the rest?

Me, obviously.

I'm Jeff, in Cincinnati. More specifically, Mason (north of Cincy).

1996 Nissan 240SX SE SR20DET blah blah blah.

http://i94.photobucket.com/albums/l81/lord_hypnos180/s14/100_2827.jpg

Post up doods! :bigok::bigok:

[slothonaleash]

Nate Slavin

I live in columbus, more specifically upper arlington

I have a rusty, stock, black 93 s13 that smells like gas 24/7 :)

don't think you need to see a picture

[240Rookie]

My name is Josh and I live in Lexington, KY. I have a 95 240 stock and just starting to upgrade. Nice to meet some people kinda close.
Hit me up if you need anything!

Later

[Somnambulist]

Three guys? Come on! lol

[dom0988]

My name is Dom, I live just north of Columbus. I have an sr swapped s13 that was recently rear ended by a clown in a kia. It also reeks of gas 24/7. Are you on ohiodrifting.com? There are plenty of people in Cincinnati I'm pretty sure.

[Somnambulist]

My name is Dom, I live just north of Columbus. I have an sr swapped s13 that was recently rear ended by a clown in a kia. It also reeks of gas 24/7. Are you on ohiodrifting.com? There are plenty of people in Cincinnati I'm pretty sure.

I have an account but hardly ever get on there.

I'm more on cincystreetscene.com. :rawk:

[slothonaleash]

just got my stances etc. and buddy club spec 2 on so i'm recognizable from the middle aged women heh

[Z33dori]

Name : JC

Area: Lima

other sites: ohio drifting.com / 240atlanta.com / soon dayton240sx.com

da whip (no more coils, waiting for new ones)
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/2nd%20rebirth/2RB-5.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/2nd%20rebirth/2RB-5.jpg
me and my roomate
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC00011-2.jpg

[slow_sr20]

name:jesse
location: dayton
car: 1993 s13 sr20det built blah blah blah.

http://i233.photobucket.com/albums/ee31/timae86/kil%20kare%20today/DSCF0050.jpg

[Rick-95ZE]

Name: Rick



Old project, SR powered s13.5 (sold):
http://i264.photobucket.com/albums/ii196/Ricksil80/HPIM0661.jpg

Current project , Rb25 powered s14:
http://i264.photobucket.com/albums/ii196/Ricksil80/HPIM1720.jpg

[slow_sr20]

i remember that 13.5. i talked you a couple times back in the day at dave and busters-new car looks great as well.

[Rick-95ZE]

i remember that 13.5. i talked you a couple times back in the day at dave and busters-new car looks great as well.


Was that at the 300zx Club meet??

[slow_sr20]

Was that at the 300zx Club meet??

meh don't think so-this way waay back in the days of longworth hall. my coupe used to be maroon, apex n1, tein coils, ugly...think i talked to you a couple times at edgewater too.

[Rick-95ZE]

So how about a meet guys?? I feel like things here in Ohio have kinda died.. Or maybe its just me LOL!!

[slow_sr20]

things have really died in the last coulple years. i would be down for a meet, we do have a local forum dayton240sx.com. maybe post something up there-we could get alot better turnout if everyone in dayton knows about it.

[piranhamatt]

My name is Matt.
I have a stock 89 sohc that I'm about to paint and sell, and a 91 that was stripped to chassis only, with a redtop ready to go in (minus a couple small things)

I live on the east side of Cincinnati, and daily a 98 integra gsr.

[nathancolston]

names nathan i have a 92 coupe s14 sr powered. not much to look at right now just finished it 3 weeks ago. i live in the dayton/kettering area. damn ohio sucks!
http://i125.photobucket.com/albums/p69/nathancolston/s14sr20det030.jpg

[Rick-95ZE]

Maybe after more people have "checked in "here, I'll try to put together a meet?

[Z33dori]

sounds good... i have plenty of ppl i can bring with me

like 5 s13s 4 s14s

maybe a few more....

[Rick-95ZE]

sounds good... i have plenty of ppl i can bring with me

like 5 s13s 4 s14s

maybe a few more....



I'm not sure that any meet that I could put together ,could handle the presents of a BMF such as yourself :bowrofl:

Edit: but we shall see....

[dom0988]

I'd be down for a meet.

slow_sr20 I remember seeing you at kilkare a month or so ago... super nice car.

[Z33dori]

I'm not sure that any meet that I could put together ,could handle the presents of a BMF such as yourself :bowrofl:

Edit: but we shall see....

we would have to have FBI surveillance for my presence ...

lol

[slow_sr20]

slow_sr20 I remember seeing you at kilkare a month or so ago... super nice car.

thanks, it took long enough to get together, and so far i've hit a deer and cracked the paint on an off track excursion:mepoke:

[Somnambulist]

Well this thread exploded. Haha.

Nice to see other people here in Ohio.

Just a thought, what about meeting up at the Street Life Tour on August 3rd? It's a Sunday night... But it's definitely a good time.

[Rick-95ZE]

Well this thread exploded. Haha.

Nice to see other people here in Ohio.

Just a thought, what about meeting up at the Street Life Tour on August 3rd? It's a Sunday night... But it's definitely a good time.


I think I will be in Michigan then,but I'll check :)

[Somnambulist]

I think I will be in Michigan then,but I'll check :)

Gay. What's in Michigan?

[Z33dori]

yea i'll be back home in Florida....

so i won't be there ...

[Rick-95ZE]

Gay. What's in Michigan?

Relatives :rolleyes: My uncle died about a month ago, and My Dad and I are going up to help sort through and sell a bunch of stuff.. My attendance is requested because there happens to be is a few Motorcycles, boats, jet-ski's,trailers, and Car parts,Ect.. Stuff that no one else in the family has any clue what its all worth or how to go about selling it.

[Somnambulist]

Relatives :rolleyes: My uncle died about a month ago, and My Dad and I are going up to help sort through and sell a bunch of stuff.. My attendance is requested because there happens to be is a few Motorcycles, boats, jet-ski's,trailers, and Car parts,Ect.. Stuff that no one else in the family has any clue what its all worth or how to go about selling it.

Ahhh ok. Sorry to hear about your uncle passing away.

[Rick-95ZE]

Ahhh ok. Sorry to hear about your uncle passing away.


Sorry x3LOL!! I've had 3, yes THREE! uncles pass away in the past two months.. No worries, I'm well adjusted:D

[Z33dori]

dam..... thats real shitty

[Somnambulist]

Sorry x3LOL!! I've had 3, yes THREE! uncles pass away in the past two months.. No worries, I'm well adjusted:D

Yikes.

I haven't lost and family members yet. At least not ones I'm close to. I'm definitely not looking forward to that happening. :cry::-/

Anyway. So a meet.

I'm down. What works best for everyone? Weekends? Weekdays? Fridays? Saturdays? Sundays?

[boosted98gst]

hey my name is jason I live west of columbus and drive an 89 coupe with an rb in the garage, I am in the process of buying a new s13 daily. If you guys meet up hopfully its during sunday's because I work weird hours.

[Rick-95ZE]

Yikes.



Anyway. So a meet.

I'm down. What works best for everyone? Weekends? Weekdays? Fridays? Saturdays? Sundays?

maybe tie it in with a Css meet :bowrofl:

[Somnambulist]

maybe tie it in with a Css meet :bowrofl:

Mmm.. I guess...:mepoke:

[slw240sx]

wow, im late...

Im Jon, I drive a beat 90 with a built Ca18 swap thats still half tuned.

I have still yet to meet hardly any of you guys from cinncy. I know a bunch of the bustown crew. Dom saved my ass the first time i tracked my car this year lol. we will be having our summer meet here in the next few weeks up in dayton. we just had our really really late spring meet which was a complete bust due to weather.

I think we are going to get a tent and set up at Kilkare on the 3rd for the street life tour event. So stop over and say what up.

Jon

[slw240sx]

which site down there charges 1.00 a month now? CSR? i signed up for that thinking it was a one time deal and it rebilled me.

[Z33dori]

sucks im going on my break next week and wont be back till aug 18th

so my car has to sit broken, and i miss SLT on the 3rd.... blah its worth it.. haven't been home in ages... lima is killin me

[nxpoweredsr20]

Branden McCool from west chester , OH
95 240sx:
http://i268.photobucket.com/albums/jj25/nxpoweredsr20/S7300017.jpg

[Rick-95ZE]

^ Nice! +1 for you Branden:D

[Somnambulist]

wow, im late...

Im Jon, I drive a beat 90 with a built Ca18 swap thats still half tuned.

I have still yet to meet hardly any of you guys from cinncy. I know a bunch of the bustown crew. Dom saved my ass the first time i tracked my car this year lol. we will be having our summer meet here in the next few weeks up in dayton. we just had our really really late spring meet which was a complete bust due to weather.

I think we are going to get a tent and set up at Kilkare on the 3rd for the street life tour event. So stop over and say what up.

Jon

I'll come introduce myself at the Street Life Tour then. :bigok:

which site down there charges 1.00 a month now? CSR? i signed up for that thinking it was a one time deal and it rebilled me.

Yeah I think it's monthly or something. I dunno.

That site is a piece anyway. Full of gay Honda owners who argue amongst themselves. :keke:

[slow_sr20]

i'm down for meetin' up at the s.l.t. security in numbers:hug: hahaha see you all on the third.

[Somnambulist]

We should wear nametags.

Hi my name is...

LOL.

[slothonaleash]

Damn... I'm going to be in New York on the 3rd... I guess I'll have to pass up the chance to meet some of you guys.

[smokey861]

Howdy Doody

Name is smokey. I run the dayton240sx.com site. I have s13.4.

and i like slurpees, frostees, and iceees.

:)

[slow_sr20]

Howdy Doody

Name is smokey. I run the dayton240sx.com site. I have s13.4.

and i like slurpees, frostees, and iceees.

:)


ICE COLD!!:coolugh: !! hahaha whats up smokey?

[smokey861]

ICE COLD!!:coolugh: !! hahaha whats up smokey?

Hahaha . yup Ice Cold homie. Ice cold.......I forgot to add smoothies on there as well. But Jon says I'm gay for likeing strawberry smoothies. :rofl:

[Somnambulist]

I prefer milkshakes.

Especially Steak N Shake Banocolate.. Yummm.

[dom0988]

If I get my frame straightened i'll be driving on the third, if not I'll just be hanging out there. Soo I guess I'm down for this s.l.t. "meet."

[Z33dori]

fruitesta freeze = WIN
Vanillia frosty = WIN
Strawberry Milk shake = WIN

[dom0988]

original forsty + fries = ultimate win

[Rick-95ZE]

My milkshake brings all the boys to the yard:bigok:

[Dirty Habit]

I figure I should check in. Im in Bowling Green Ohio. I have a dohc swapped 89 coupe and a 83 280zx Turbo. The Z is in Florida with my parents for safe keeping until Im in better climate and have garage space.

Im always down for a meet.

[Somnambulist]

Well. We should probably make a new thread about it then.

[Z33dori]

yes... but dont let this thread Die


we gotta make it stay ALIVE AND BUMPIN

[Somnambulist]

yes... but dont let this thread Die


we gotta make it stay ALIVE AND BUMPIN

Of course.:naughtyd::rawk:

[sxshep]

Kyle

Cincinnati Ohio (Colerain area, just inside the 275 loop)

1996 240sx

stock KA with exhaust and some basic suspension stuff (springs, shocks, sways, bushings, etc), J30 VLSD, and s13 se wheels for now


http://i182.photobucket.com/albums/x225/shepshep240/sxshep2.jpg

[slothonaleash]

Here's my s13 is you didn't already see it in the low dd thread.

http://i136.photobucket.com/albums/q196/b00st3d240/IMG_1531.jpg

Front collars are going and will prob. drop about another inch

Tuckin 7-spokes!!!

[Z33dori]

dam.... how do u get around Ohio like that..


i miss having my car that low....

[spool_sample]

How'd I miss this thread?

I'm Andrew, from Akron, OH.

http://i39.photobucket.com/albums/e193/fullboost14/DSC_5008.jpg

Hi, all.

[Z33dori]

wow never expected this many ppl.

bad ass

[slothonaleash]

dam.... how do u get around Ohio like that..


i miss having my car that low....


I live in a pretty well maintained neighborhood (Upper Arlington if anyone's familiar) and I'm yet to leave the area since being this low so I haven't run into any problems.... yet haha

I can deal with all the scraping, just so long as I don't get stuck... which actually has happened once so far heh.

[Rick-95ZE]

Kyle

Cincinnati Ohio (Colerain area, just inside the 275 loop)

1996 240sx

stock KA with exhaust and some basic suspension stuff (springs, shocks, sways, bushings, etc), J30 VLSD, and s13 se wheels for now


http://i182.photobucket.com/albums/x225/shepshep240/sxshep2.jpg


WELL! its about time:)

[Somnambulist]

I live in a pretty well maintained neighborhood (Upper Arlington if anyone's familiar) and I'm yet to leave the area since being this low so I haven't run into any problems.... yet haha

I can deal with all the scraping, just so long as I don't get stuck... which actually has happened once so far heh.

Are you gonna raise it up for the winter? Or do you have something else to drive?

[Rick-95ZE]

^ LOL! Roads in Ohio are shit!! This is how i deal:

http://memimage.cardomain.com/member_images/11/web/587000-587999/587205_300_full.jpg

http://memimage.cardomain.com/member_images/11/web/587000-587999/587205_298_full.jpg

with 32/11.50 BFG At s!!!

[smokey861]

My milkshake brings all the boys to the yard:bigok:


I want nothing to do with your milshake rick .... :barf:

[Somnambulist]

^ LOL! Roads in Ohio are shit!! This is how i deal:

http://memimage.cardomain.com/member_images/11/web/587000-587999/587205_300_full.jpg

http://memimage.cardomain.com/member_images/11/web/587000-587999/587205_298_full.jpg

with 32/11.50 BFG At s!!!

I love Frontiers. How's the gas mileage on it though? lol.

I want nothing to do with your milkshake rick .... :barf:

Agreed.

[Rick-95ZE]

I love Frontiers. How's the gas mileage on it though? lol.



Agreed.

With those tires! 15-18mpg:mad::madfawk:

[Somnambulist]

With those tires! 15-18mpg:mad::madfawk:

Yikes!!!!!! :keke::keke:

That's why I want one of these.

http://www.vmrintl.com/reviews/reviewpics/97-01honda_crv.jpg

5 speed, 4WD, 30 MPG. :bigok::aw:

[jholman05]

I'm Jesse from Cincinnati, Colerain area.

Drive a '93 ka-t coupe, also have a '91 hatch.

http://i159.photobucket.com/albums/t155/jholman05/100b3602.jpg

DD a 98 Ranger

http://i159.photobucket.com/albums/t155/jholman05/100_1294-1.jpg

I spend most of my time on cincystreetscene.com , and ka-t.org mostly just on zilvia for all the for sale stuff.

I think another css nissan meet should be in order, last one didnt have that bad of turn out.

[Somnambulist]

I'm Jesse from Cincinnati, Colerain area.

Drive a '93 ka-t coupe, also have a '91 hatch.

http://i159.photobucket.com/albums/t155/jholman05/100b3602.jpg

DD a 98 Ranger

http://i159.photobucket.com/albums/t155/jholman05/100_1294-1.jpg

I spend most of my time on cincystreetscene.com , and ka-t.org mostly just on zilvia for all the for sale stuff.

I think another css nissan meet should be in order, last one didnt have that bad of turn out.

*ahem*

http://zilvia.net/f/mid-atlantic-states/204938-ohio-zilvian-meet.html

:x:

[Z33dori]

lol shameless pluggin lol


fuck it we are allowed to


my 240 is my DD... which sucks b/c it's always broken...

need a job so i can get a winter beater

[slothonaleash]

Are you gonna raise it up for the winter? Or do you have something else to drive?

I may raise it but I'm going to wait and see how it does under snowfall...I've got nowhere to go when school is cancelled anyhow haha.

If I really need to go somewhere, I have a Toyota Sienna, Volvo 960, and a 2007 Hyundai Sonata at my disposal seeing as they are not being used at the time.

Living with your parents KICKS ASS.

[Somnambulist]

lol shameless pluggin lol


fuck it we are allowed to


my 240 is my DD... which sucks b/c it's always broken...

need a job so i can get a winter beater

Agreed... :eek3:

I may raise it but I'm going to wait and see how it does under snowfall...I've got nowhere to go when school is cancelled anyhow haha.

If I really need to go somewhere, I have a Toyota Sienna, Volvo 960, and a 2007 Hyundai Sonata at my disposal seeing as they are not being used at the time.

Living with your parents KICKS ASS.

Haha definitely. :naughtyd:

[Rick-95ZE]

I'm Jesse from Cincinnati, Colerain area.

Drive a '93 ka-t coupe, also have a '91 hatch.

I think another css nissan meet should be in order, last one didnt have that bad of turn out.
LOL! more CSS crew members:)



We should get Coolnick on here:hahano:I'm sure he would last at least a month before hes BANNED!

[slw240sx]

Who all is coming out for SLT on Sunday? im thinking about having all the ohio people meet up at the shop then we can all roll out in a caravan. let me know who all wants to meet up. we will be here making sure all the cars that are driving are prepped and ready to go.
Jon

[slw240sx]

anyone in the colerain area know Joe with a subbie used to have a ca18 powered coupe and a few s14s? or kevin with the 350z they hang out together alot? if you know them invite them out on the third i havent seen those guys in years.

[smokey861]

i keep forgeting that SLT is this weekend

[Rick-95ZE]

^ I keep saying I'm going to make it to one.. Maybe this weekend I'll actually get off my ass:wiggle:

[slow_sr20]

^ I keep saying I'm going to make it to one.. Maybe this weekend I'll actually get off my ass:wiggle:

doooo iiiiitttt. should be a good event, plus from what i understand they upped the payout for the drift event so everyone should be driving their asses off. this is like the 3rd or 4th one so hopefullf the word is out and it will be BIG!

[Somnambulist]

^ I keep saying I'm going to make it to one.. Maybe this weekend I'll actually get off my ass:wiggle:
Get off your ass you bum.:hammer:

[Zerolift Autolab]

http://i251.photobucket.com/albums/gg308/Zerolift-Auto/S14%20Zenki%20Build%20Up/_MG_0065.jpg

Car Currently has Enkei RPF1's - as seen below
http://i251.photobucket.com/albums/gg308/Zerolift-Auto/HIN%2008%20-%20Columbus/HIN003-1.jpg

Thanks,
Robert

[Rick-95ZE]

^Nice check in Robert :hahano:




I'm spending some time on the car today(wiping the dust off it ) as I have not driven it in month. Its looking good that I will be in attendance this Sunday:)

[Z33dori]

http://i251.photobucket.com/albums/gg308/Zerolift-Auto/S14%20Zenki%20Build%20Up/_MG_0065.jpg

Car Currently has Enkei RPF1's - as seen below
http://i251.photobucket.com/albums/gg308/Zerolift-Auto/HIN%2008%20-%20Columbus/HIN003-1.jpg

Thanks,
Robert


Robert what is the status on the Convertible S13 u guys were building..

[Altered_Image]

Name: Nate
Location: Cleveland - Westlake
car: s13 widebody - still in progress (california car)

[mastaflash05]

Brent-Theman here, representing Colerain in Cincinnati.

http://i164.photobucket.com/albums/u3/bnvbrent/DSCN2751.jpg

http://i164.photobucket.com/albums/u3/bnvbrent/DSCN2748.jpg

http://i164.photobucket.com/albums/u3/bnvbrent/DSCN2747.jpg

[Dirty Habit]

^ Clean car you have there man. Welcome!

[Rick-95ZE]

Good turn out guys!! +1 for all:D

[Z33dori]

fucking beast motor set up..... and he has my bumper

dammit why must i be poor

[Somnambulist]

I invited everyone to the newly created Ohio Zilvians social group.

lawl.

http://zilvia.net/f/groups/ohio-zilvians.html

[Rick-95ZE]

I invited everyone to the newly created Ohio Zilvians social group.

lawl.

http://zilvia.net/f/groups/ohio-zilvians.html

Is this like Alcoholics Anonymous:confused:

[Z33dori]

lol no


this is like the gather of bad mother fuckers

[Rick-95ZE]

lol no


this is like the gather of bad mother fuckers


LOL! NO. Its going to be more like the movie The Highlander!! One at a time we have to fight, until one looses their head. "THERE CAN BE ONLY ONE!!" :hahano: BMF that is;)

[Zerolift Autolab]

Robert what is the status on the Convertible S13 u guys were building..

Motor being built right now.
ATI - sent me the wrong crank pulley (was for STI)
So that took another friggen month to get the right one.

Thanks,
Robert

http://i251.photobucket.com/albums/gg308/Zerolift-Auto/Upcoming%20S13%20Vert/BU003.jpg
http://i251.photobucket.com/albums/gg308/Zerolift-Auto/Upcoming%20S13%20Vert/BU001.jpg

[Rick-95ZE]

^ *cough* its about time LOL! That thing is like 6 years in the making:rolleyes:

[Z33dori]

dam that sucks...

any chances of it being done before the drift season is over and the snow begins to fall...

[boosted98gst]

Anyone know in ohio area where I can find another silvia front end with brick headlights? I need another set for my other car while in paint, please help me out zerolift have any? let me know.

[Leetheslacker]

i didnt know this was here!

i know i've definintely seen a few of you at kilkare/outbrake/css meets.
i live down in clifton. car lives in eastgate.

i used to have this.
http://i6.photobucket.com/albums/y233/Leetheslacker/IMG_3013.jpg
http://i6.photobucket.com/albums/y233/Leetheslacker/IMG_31151.jpg

and then this clunker.
http://i6.photobucket.com/albums/y233/Leetheslacker/IMG_5761.jpg

and now im putting this thing together. 89 with a 95 de.
http://i6.photobucket.com/albums/y233/Leetheslacker/IMG_3221.jpg
http://i6.photobucket.com/albums/y233/Leetheslacker/IMG_3214.jpg
http://i6.photobucket.com/albums/y233/Leetheslacker/IMG_3246.jpg

[Z33dori]

dam that hatch is slizzamed

[SinisterSntra91]

Am I too late to check in?

Name is Brennan
1995 240sx SE currenly powered by my two legs, soon to be VQ35DE (single or twin turbo, havent decided) Can see the build here:
http://zilvia.net/f/chat/189689-my-project-build.html

My other rides and past projects are:
1992 NX2000 SR20DET GTI-R powered (Car I built, gave to my dad)
http://i23.photobucket.com/albums/b385/SinisterSentra91/NX2000%20project/f9c6c1e1.jpg
http://i23.photobucket.com/albums/b385/SinisterSentra91/0576e364.jpg
My first car, and the first car I built (gave to my brother) 1991 Nissan Sentra XE U12 SR20DET powered:
http://i23.photobucket.com/albums/b385/SinisterSentra91/IMG_1665.jpg

The daily, my work horse 2006 Nissan Frontier SE 4x4:
http://i23.photobucket.com/albums/b385/SinisterSentra91/S14/IMG_1654.jpg

[Rick-95ZE]

:eek2:^OH SHIT!!! That is a very nice nx! +1 for you as soon as I'm able LOL!! 24hrs

[Z33dori]

holy fuck i was looking at your build on my350z....

i had no idea you were in Cinnci

fuck u need to finish so i can get a ride in the beast.

[Somnambulist]

Am I too late to check in?

Name is Brennan
1995 240sx SE currenly powered by my two legs, soon to be VQ35DE (single or twin turbo, havent decided) Can see the build here:
http://zilvia.net/f/chat/189689-my-project-build.html

My other rides and past projects are:
1992 NX2000 SR20DET GTI-R powered (Car I built, gave to my dad)
My first car, and the first car I built (gave to my brother) 1991 Nissan Sentra XE U12 SR20DET powered:
The daily, my work horse 2006 Nissan Frontier SE 4x4:


Hell no!

Nice cars! I've been subscribed to your build thread for a while. I can't wait to see it!!!!!!!!!!!!!:bigok::bigok::bigok:

[red s14]

i'll get some pics up of my ride soon!!!!

name: dan
location: cincy
car: 97 s14 with fully build sr red top. 2871 with .64a/r

i'm good friends with rick aka rick-95ze and know jeff aka somnambulist. i know some of the dayton guys and thats about it. looking forward to the ohio meet. nice cars and builds guys.

[Rick-95ZE]

i'll get some pics up of my ride soon!!!!

name: dan
location: cincy
car: 97 s14 with fully build sr red top. 2871 with .64a/r

i'm good friends with rick aka rick-95ze and know jeff aka somnambulist. i know some of the dayton guys and thats about it. looking forward to the ohio meet. nice cars and builds guys.



PICTURES!! PICTURES!! PICTURES!!! :bowrofl::bowrofl::bowrofl::bowrofl::bowrofl:


I don't understand why you have been hiding that thing! Modesty is soooo last season LOL!!

[Leetheslacker]

i'll get some pics up of my ride soon!!!!

name: dan
location: cincy
car: 97 s14 with fully build sr red top. 2871 with .64a/r

i'm good friends with rick aka rick-95ze and know jeff aka somnambulist. i know some of the dayton guys and thats about it. looking forward to the ohio meet. nice cars and builds guys.

what up dan? hows the s14?

[slw240sx]

Lee, how soon until the s13 is ready to rock? I might have a part for you to test out for the shop since you can beat the shit out of KA's like no one else around here. a KA oil pan that holds 5.5 or so quarts of oil and is baffled. I want someone that tracks their cars to run it.

[Somnambulist]

Lee, how soon until the s13 is ready to rock? I might have a part for you to test out for the shop since you can beat the shit out of KA's like no one else around here. a KA oil pan that holds 5.5 or so quarts of oil and is baffled. I want someone that tracks their cars to run it.

Goddamn! You should make one for an SR too... :boink:

[red s14]

PICTURES!! PICTURES!! PICTURES!!! :bowrofl::bowrofl::bowrofl::bowrofl::bowrofl:


I don't understand why you have been hiding that thing! Modesty is soooo last season LOL!!

i'll get some up son!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

what up dan? hows the s14?

YO!!!! what up. its ok just little dump BS going wrong but nothing major.


Goddamn! You should make one for an SR too... :boink:

yes sir!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!

[Rick-95ZE]

http://www.kilkare.com/

KILKARE TONIGHT LADIES!!!! IT'S GONNA BE YUGE!!

[osus14]

Sup guys.. I'm am and OG on OD.. :) I have a black s14 kouki not much done other then suspension/brakes/wheels.. But I do have a sr and lots of lots of Goodies sitting in the garage..

[Z33dori]

blah.... i wanted to drift my mom's Z so bad today.... it was raining... so tempted

cant afford any mistakes or repairs


awww i want my 240 back dammit

[xxtokesxx]

Hi... Name's Ameen...

I'm on here because a certain friend won't stop pestering me til I give up this pegleggin fwd no traction game :)... and get into the RWD game... Nontheless, I do live in Cincinnati... and I'm here to learn.

Cars that I've been around in recently...

1998 200sx SE-R (Sentra) - My poor can't believe its not dead swapped daily...
http://i49.photobucket.com/albums/f254/xxtokesxx/1998%20Nissan%20200SX%20SE-R/SideExit024.jpg

1993 Sentra SE-R - SR20DET Powered... Sold
http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20Sentra%20SE-R/Exterior%20Pictures/Side%20Exit%20Exhaust/SideExit088.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20Sentra%20SE-R/ohiomeet080.jpg

1993 NX2000 - Incoherenly bought broke, and just recently Sold
http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/nxbronze008.jpg

1991 NX2000 - Currently under the butter knife... SR20DET Powered
http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/Project%20and%20Build%20Pics/NXBuild167.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/Project%20and%20Build%20Pics/NXFTW063.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/Project%20and%20Build%20Pics/NXFTW124.jpg

[Z33dori]

dam i want B13 sentra ....

mainly for a daily...then maybe one day do SR swap in it

[SinisterSntra91]

Hi... Name's Ameen...
I'm on here because a certain friend won't stop pestering me til I give up this pegleggin fwd no traction game :)... and get into the RWD game... Nontheless, I do live in Cincinnati... and I'm here to learn.


I will get your ass into the rwd game, there is no escape!

[osus14]

I will get your ass into the rwd game, there is no escape!


HAHA, you know it. Once i went RWD.. I will never go back! AWD is pretty fun too.

[SinisterSntra91]

HAHA, you know it. Once i went RWD.. I will never go back! AWD is pretty fun too.

Havent even driven my car yet and I am already hooked. Truck is rwd and its alot of fun so I guess that counts.

[xxtokesxx]

I will get your ass into the rwd game, there is no escape!

Bah, thats what you said about boost... and... wait... well damnit!

[Rick-95ZE]

Bah, thats what you said about boost... and... wait... well damnit!


Weeelll hello sir :wavey: good to see you here!! + for you as soon as I can:bigok:

P.s I need some advice on possibly purchasing a Sentra for the wife.. I'll be calling you in 3...2....1

[smokey861]

here are some pics of a meet the dayton240sx.com guys went to my car is the white s13.4

it was nice to get out of the shop and cruise for once


http://img.photobucket.com/albums/v226/smokey861/SIPmeet001.jpg
http://img.photobucket.com/albums/v226/smokey861/SIPmeet002.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet003.jpg
http://img.photobucket.com/albums/v226/smokey861/SIPmeet004.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet005.jpg
http://img.photobucket.com/albums/v226/smokey861/SIPmeet007.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet010.jpg
http://img.photobucket.com/albums/v226/smokey861/SIPmeet011.jpg
http://img.photobucket.com/albums/v226/smokey861/SIPmeet013.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet018.jpg
http://img.photobucket.com/albums/v226/smokey861/SIPmeet021.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet031.jpg


http://img.photobucket.com/albums/v226/smokey861/SIPmeet027.jpg


http://img.photobucket.com/albums/v226/smokey861/SIPmeet028.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet032.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet031.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet023.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet036.jpg


http://img.photobucket.com/albums/v226/smokey861/SIPmeet029.jpg

http://img.photobucket.com/albums/v226/smokey861/SIPmeet037.jpg
http://img.photobucket.com/albums/v226/smokey861/SIPmeet040.jpg

[Rick-95ZE]

^ I remember that white s13.5!! I've talked to that guy a few times.. Is he still around??

[Somnambulist]

^ I remember that white s13.5!! I've talked to that guy a few times.. Is he still around??

He's on SRD.

[Rick-95ZE]

He's on SRD.


and he worked for a Nail Salon, doing Nails :keke:

[Z33dori]

i r jealous of those who get to drive their SR on the street w/o worrying if its gonna fuck up.

i remember those days.

[slw240sx]

and he worked for a Nail Salon, doing Nails :keke:

And Now he owns his own Nail Joint and makes $$$. its a hustle and I can't knock a man's hustle when it pays.


i have yet to get a decent picture of my car. Anyone have some 17's or 18's with decent offsets for sale?

[Z33dori]

So guys help a brother out:

Stance GR+pro

PBM

Dmax

i can't decide

[Somnambulist]

So guys help a brother out:

Stance GR+pro

PBM

Dmax

i can't decide

Never heard of the last two.. So I vote Stance GR+Pro.

[Rick-95ZE]

And Now he owns his own Nail Joint and makes $$$. its a hustle and I can't knock a man's hustle when it pays.


i have yet to get a decent picture of my car. Anyone have some 17's or 18's with decent offsets for sale?

Yeah, I have "hung out" with him a few times..I'm embarrassed I don't remember his name (Rick-95ZE is very bad with names) he knows me though.. He's a super nice guy,and has a good sense of humor. I remember even he laughed a little when he told me he did nails. He shrugged his shoulders, smiled and said " I'm Vietnamese, what?" LoL!! And YEAH, he also told me how much he made:eek2: and I immediately went home to brush up on my Dremel tool skills. I can only imagine what he's making now :) Last time I saw him was three years ago at Scribble Jam, he had his white s13.5 and I had my black s13.5 LOL!!


Is he on Zilvia???:confused:

[Z33dori]

Never heard of the last two.. So I vote Stance GR+Pro.

PBM= Powered By Max.... sponsor on this site... drift specific

Dmax= JDM drift glory..... you must live under rocks lol.

[Somnambulist]

PBM= Powered By Max.... sponsor on this site... drift specific

Dmax= JDM drift glory..... you must live under rocks lol.

I'm not a drifter type person. And I've only been on zilvia for a year or so.

:hyper:

[osus14]

Soo.. Advan RSs in gunmetal. Or Keep my volk GT-Vs.. Can't decide

http://i18.photobucket.com/albums/b128/1fast5gp/IMG_0428.jpg

RS looks like this.. but they need refinished
http://img.photobucket.com/albums/v714/aclex21/DSC01490-1.jpg

[Somnambulist]

Advan RSs are my favorite wheel ever. Get the Advans.

[Z33dori]

advans


okay so after a few pms

I'm down to PBM and DMax

so close right now.... dammit

[boosted98gst]

dude frank you need to lower your car!~ lol

[osus14]

dude frank you need to lower your car!~ lol

LOL not till i get my fenders rolled and pulled. I rub like its my job!!

[s14sr_pwr]

figure ill check in.... im from the dayton area, im on ohiodriftng and dayton240sx.com my name there is koukis14drift. i have a 92 coupe. with s14sr. gets the job done for now. ill try to get pics of it soon.

[Rick-95ZE]

LOL not till i get my fenders rolled and pulled. I rub like its my job!!

Yeah, I talked to Dan aka reds14 ,and he said he was down to do some rolling. So just let us know when you could make it down to cincy. Call me and we will set somthing up ;)

[slw240sx]

advans


okay so after a few pms

I'm down to PBM and DMax

so close right now.... dammit


get stance and support the midwest vendors/ companys! haha im a stance dealer so small plug.

[Z33dori]

hmm i'm rockin a bar roll right now..

need to get a real roll...then redo the pull.

[slw240sx]

Yeah, I have "hung out" with him a few times..I'm embarrassed I don't remember his name (Rick-95ZE is very bad with names) he knows me though.. He's a super nice guy,and has a good sense of humor. I remember even he laughed a little when he told me he did nails. He shrugged his shoulders, smiled and said " I'm Vietnamese, what?" LoL!! And YEAH, he also told me how much he made:eek2: and I immediately went home to brush up on my Dremel tool skills. I can only imagine what he's making now :) Last time I saw him was three years ago at Scribble Jam, he had his white s13.5 and I had my black s13.5 LOL!!




Is he on Zilvia???:confused:

thats Timmy aka timmy fingernails. I thought he was on here, but he doesnt get on the forums as much as he used to , between work and the xbox hes a busy guy.

[Z33dori]

get stance and support the midwest vendors/ companys! haha im a stance dealer so small plug.

It all depends


how fast i can sell the Apexi coils that UPS finally found

and who can get me coils the cheapest


and i have been given some really good quote on Dmax.... recently that put Stance out of the running ....


idk the main thing is to get those Apexi sold.

[slow_sr20]

stance....no questions asked-local DOMESTIC company=easier to get tech support and rebuilds....

[boosted98gst]

Frank I have a roller, and so does peter their is no reason why you should be ridding 4by4 still and we all live less then 20 min from you.

[boosted98gst]

get stance and support the midwest vendors/ companys! haha im a stance dealer so small plug.

id suppor local, but are you able to beat the prices in the vendors section? if so I will stop by next week to pick up another set for back up.

[Z33dori]

stance....no questions asked-local DOMESTIC company=easier to get tech support and rebuilds....

this true....

So many stance dealers in this area.

but its not like anyof my options are shitty

but i did not factor in possibly needed Tech for Dmax

[Somnambulist]

We need an off topic thread so we don't get in trouble...

[Dirty Habit]

^ Naw I think we should be fine. This is family business.

Z33: If you dont get coils by the meet you can check out mine. I have stance Gr's. Take my coupe for a spin and see how they are.

Rick: Scribble Jam? You write? I havent picked up a can in ages. Mainly airbrushing now.

Sr14 is good people. Met up with him in dayton to pick up an ecu I badly needed on short notice.
(Im s130 on OD.)

Getting psyched for this meet. I hope everyone can get to c-bus.

[Dirty Habit]

Btw. That rootbeer(?) coupe on the previous page is sex.

..and I cant give out any more rep to ohioans. I must spread it around first.lol.

[Z33dori]

thanks for the offer.. I have driven a set of gr+ and gr+pro on teh regular

i know they are good.... i like them alot....

like i said its gonna come down to cheapest and fastest.... btwn the 3

[Rick-95ZE]

Rick: Scribble Jam? You write? I havent picked up a can in ages. Mainly airbrushing now.

.


haha, no.. Most of my car friends don't know this about me, but I'm an old school Breaker :tweak: "oh its ture".. I never really got into tag art LOL!! or the microphone.

[Rick-95ZE]

thats Timmy aka timmy fingernails.


That sounds like a Mob name:) *in a cheezy Italian accent* "Thats Timmy fingernails ,he once made a guy eat his own fingernails" LOL!!!!

[Somnambulist]

Btw. That rootbeer(?) coupe on the previous page is sex.

..and I cant give out any more rep to ohioans. I must spread it around first.lol.

Me either!!!!!!!! :keke:

[Leetheslacker]

anybody around here have/wanttomakeme a egr blockoff plate?

my intakes in pieces and i kinda need it before i reassemble. :-/

[Z33dori]

support the cube

5 dolla t shirt

Nissan Cube Store (http://nissancubestore.spreadshirt.com/us/US/Shop/Index/)

[Leetheslacker]

Lee, how soon until the s13 is ready to rock? I might have a part for you to test out for the shop since you can beat the shit out of KA's like no one else around here. a KA oil pan that holds 5.5 or so quarts of oil and is baffled. I want someone that tracks their cars to run it.

ill get ahold of you when i get this clunker running.
i need one of cody's overflow tanks and maybe a jank custom boso/DD catback too eventually.

[osus14]

Me either!!!!!!!! :keke:

ohio Reps FTW! :)

[Z33dori]

hey do any of you guys have some Aftermarket head parts laying around for a s14 SR?

my buddy popped off a Rocker arm while he was home.... so once i get home, i have to pull apart his head. he has the money so we are looking to go ahead and build it up good.

looking for:
Intake & Exhaust valves
Valve springs
retainers
rocker arm stoppers
cams (260+)
maybe cam gears


if you have any thing just pm what brand, specs, price, w/e

[slw240sx]

leave the valves stock unless he knocked a few. i can set him up with some BC springs/retainers and 264s for a really good deal. just give me a call when hes ready.

[Z33dori]

yea he thinks he bent the valves where it fell off. but we won't know until he gets it back to lima and we rip it apart.

[osus14]

hey do any of you guys have some Aftermarket head parts laying around for a s14 SR?

my buddy popped off a Rocker arm while he was home.... so once i get home, i have to pull apart his head. he has the money so we are looking to go ahead and build it up good.

looking for:
Intake & Exhaust valves
Valve springs
retainers
rocker arm stoppers
cams (260+)
maybe cam gears


if you have any thing just pm what brand, specs, price, w/e


looking for the same thing.. maybe we can hit up a vender and see if we can get a group buy going.

I already have a greddy RAS and HKS cam gears though :)

[osus14]

Look what I just got :)

http://i18.photobucket.com/albums/b128/1fast5gp/GT3076R.jpg

[Somnambulist]

...What is it?

[osus14]

...what is it?

gt3076r .82ar :)

[Z33dori]

awww fuc u... j/k

i wantz..... no fair...

[Somnambulist]

gt3076r .82ar :)

Nice.

So for some reason, I can't see who has given me rep.

Anyone else have this problem? I'm still a premie... :hammer:

[Z33dori]

yea they got rid of that awesome lil premie gift. Mainly b/c a certain group was abusing the privilege


hopefully it will be back before to long

[Somnambulist]

yea they got rid of that awesome lil premie gift. Mainly b/c a certain group was abusing the privilege


hopefully it will be back before to long

Who would do that???????

:keke:

[Z33dori]

lol

gang bangers ..

*hides*

[Rick-95ZE]

EDIT: Fine jeff!:squint::mad:

[Somnambulist]

Given our upcoming get together, I was curious as to how some of you feel about meets. SSooooo Vote and comment in my poll!!!!

http://zilvia.net/f/polls/208169-car-meet-do-you-enjoy-more.html#post2246132

Quit spamming!!!!!!

:fawk::fawk::fawk:

[Altered_Image]

I am not trying to hijack this thread, but wanted to keep this somewhat local:

Last month my 240 was "stolen" from the garage where I was having it worked on. I put over 2 years and $12K into the build on that car.

I have posted in the Wanted section, but have had no replies. If anyone has a good lead on a well running, already swapped S13 for a decent price, please let me know! I will give the referrer $100 in credit at my vinyl graphics shop (always free shipping).

Thanks guys - I am in the Cleveland area, but will travel. I come down to Cinci about ever other month for work and Columbus every other week.

[Somnambulist]

Hmm. That sucks to hear man.

You got any pictures?

[Altered_Image]

Hmm. That sucks to hear man.

You got any pictures?


Yeah, I can't post pics from work since I do this from my blackberry. I will get some up as soon as I can.

Meanwhile, I am looking for another car. I feel so naked....:cry:

[osus14]

Here is a s14.5 that was for sale a while ago. I am pretty sure it is still for sale. :) Here is my referral!!

http://zilvia.net/f/cars-sale/195884-1996-nissan-240sx-sr20det-s15-face-ssrs-clean.html

check it out :)

[Somnambulist]

Here is a s14.5 that was for sale a while ago. I am pretty sure it is still for sale. :) Here is my referral!!

http://zilvia.net/f/cars-sale/195884-1996-nissan-240sx-sr20det-s15-face-ssrs-clean.html

check it out :)

S14.5 FTL... Blech.. but to each his own..

[boosted98gst]

Here is a s14.5 that was for sale a while ago. I am pretty sure it is still for sale. :) Here is my referral!!

http://zilvia.net/f/cars-sale/195884-1996-nissan-240sx-sr20det-s15-face-ssrs-clean.html

check it out :)

no offense but that car is horrible but this is my opinion, FRP/ big body kits front ends that do not belong on cars are not cool when is the nissan crowd going to figure this out. nissan guys make fun of honda guys for being ricey, and I see more riced nissan then anything, no one is orginal anymore.

I give peter 1000 respect points for throwing a rotay in his s14 to get away from the bandwagon, I wish nissan's never got as big as they did. I remember back in 1999 when me and him had both our sr 240's with silvia front ends and we though we was the coolest kids on the block.

Everyone puts the 240 as a track car yet 90% of them ever see nothing, its either beat up 240's or hardparked 240's built by other people. then you have the 10% of the guys who do it before it was cool.

I guess this goes for everything its gets old maybe I need to find older 240 guys to hang out with .

[Z33dori]

okay not sure if my numbers are right but here we go..
New 240's to the Lima area: Unoh Capmus
1 yellow hatch
1 olive greeenish pig nose vert
1 black kouki s14
1 red sr hatch ricer velside looking kit
1 champagne hatch
1 black hatch...


then we already had:
1 maroon sr hatch -:)
1 red sr hatch
2 emerald s14
2 red s14
1 white hatch
1 red vert
1 black s14

im sure there are maybe 1-2 more on campus i am forgetting. Not to mention the few older ppl driving them around town

alos meet this kid that started this session w/ RB25 sil front coupe...

FUCKin eh

imma try and bring as many as i can with me

[boosted98gst]

okay not sure if my numbers are right but here we go..
New 240's to the Lima area: Unoh Capmus
1 yellow hatch
1 olive greeenish pig nose vert
1 black kouki s14
1 red sr hatch ricer velside looking kit
1 champagne hatch
1 black hatch...


then we already had:
1 maroon sr hatch -:)
1 red sr hatch
2 emerald s14
2 red s14
1 white hatch
1 red vert
1 black s14

im sure there are maybe 1-2 more on campus i am forgetting. Not to mention the few older ppl driving them around town

alos meet this kid that started this session w/ RB25 sil front coupe...

FUCKin eh

imma try and bring as many as i can with me

I remember uno only had 1 rb25det 35r coupe oh that was me, the rest was redneck trucks and camaros.

[boosted98gst]

you was only 11 years old tho lol

[Z33dori]

did u you just talk to yourself... via post.


creepy ... lol

[boosted98gst]

did u you just talk to yourself... via post.


creepy ... lol

hahaha werid it was.

[Altered_Image]

Here is a s14.5 that was for sale a while ago. I am pretty sure it is still for sale. :) Here is my referral!!

http://zilvia.net/f/cars-sale/195884-1996-nissan-240sx-sr20det-s15-face-ssrs-clean.html

check it out :)

That is probably worth that much, if you like that sort of thing. I should have been more specific though... I am looking for an AFFORDABLE S13. I blew all my $$$ on my original car and don't have $15K left for another one. I was hoping for around $4-5K or a trade for my bike (2003 Suzuki 650s - 2K miles).

Thanks for the link though...

[Sreds13]

Alright sorry I'm late I think I'm past fashionably late. Name's Gallo and my whip of choice is a 1990 s13/ silvia swap. Yeah it has the base goodies SR swap with upgrades to make it purr. Oh and I'm addicted to Arizona Green tea and Sparks on the weekends.
http://i230.photobucket.com/albums/ee212/SIPauto/silviadaycopy.jpg

P.S. Thanks to Jon, Matt and all the guys of FORCED FAB.

[osus14]

^^ nice car.. :)

[Somnambulist]

^^ nice car.. :)

I agree. I love the background. Haha.

[Somnambulist]

+1 can you see me now?

No! No, I can't!

[boosted98gst]

Alright sorry I'm late I think I'm past fashionably late. Name's Gallo and my whip of choice is a 1990 s13/ silvia swap. Yeah it has the base goodies SR swap with upgrades to make it purr. Oh and I'm addicted to Arizona Green tea and Sparks on the weekends.
http://i230.photobucket.com/albums/ee212/SIPauto/silviadaycopy.jpg

P.S. Thanks to Jon, Matt and all the guys of FORCED FAB.


This is the car I seen at SLt you get mad props for keeping things simple man! no ricey body kits, no lame stickers, nice and simple.

[Z33dori]

fuck i have to find that wall and get a few pics of my car infront of it

[Zerolift Autolab]

http://i251.photobucket.com/albums/gg308/Zerolift-Auto/Upcoming%20S13%20Vert/Engine.jpg

Hey ive got a motor in the car finally.

[Z33dori]

i'll give u 5 bucks for the intake manifold... lol

So when can we expect some ride a longs..... Mid Sep????

[xxtokesxx]

Trying to play catch up... I'm really looking forward to joining the rwd world here soon. In the mean time, here are some pics of my NX project. Just waiting on a couple things and some free time. It's FWD, but slept on SR20det none the less.

http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/Project%20and%20Build%20Pics/NXFTW361.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/Project%20and%20Build%20Pics/NXFTW297.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/Project%20and%20Build%20Pics/NXFTW322.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/Project%20and%20Build%20Pics/NXFTW257.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1993%20Nissan%20NX2000/Project%20and%20Build%20Pics/NXFTW295.jpg

[Rick-95ZE]

Trying to play catch up... I'm really looking forward to joining the rwd world here soon. In the mean time, here are some pics of my NX project. Just waiting on a couple things and some free time. It's FWD, but slept on SR20det none the less.


AMEAN!! Are you comming to the meet on the 30th?:)

[Zerolift Autolab]

Waiting on a Peak Boost Turbo Manifold at the moment.
Have the Turbo already - GT3076R
Engine bay will fill up fast with that stuck in there !

[Z33dori]

take some pics of that manifold when u get it... thats the one i planned on running when i finally go GT30...

Finally got my coilovers in... now to sell them
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC01701.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC01702.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC01703.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC01704.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC01705.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC01706.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC01707.jpg

[Somnambulist]

They look good. Why not keep em?

[xxtokesxx]

AMEAN!! Are you comming to the meet on the 30th?:)

I want to... I'm going to be at a birthday party for my best friends daughter on the 30th in Dayton. But I will be done with that around 2pm. I may be heading up to Columbus afterward to hang out with my pops though. Not sure if everything that's going down will be over by then or not.

Then Sunday I'm meeting my friend at IPS for that import thing going on... I forget what its called.

I will most likely be in my 200 though :keke:

[Z33dori]

They look good. Why not keep em?

I want PBM...

but if they don't sell by the 2nd week of Sep they will be going on

[Somnambulist]

I want PBM...

but if they don't sell by the 2nd week of Sep they will be going on

Just put em on. :bigok:

[Rick-95ZE]

I want to... I'm going to be at a birthday party for my best friends daughter on the 30th in Dayton. But I will be done with that around 2pm. I may be heading up to Columbus afterward to hang out with my pops though. Not sure if everything that's going down will be over by then or not.

Then Sunday I'm meeting my friend at IPS for that import thing going on... I forget what its called.

I will most likely be in my 200 though :keke:


:madfawk::madfawk: :squint::hahano:

[Somnambulist]

I am so excited!!!!!!!!!!!!

[Z33dori]

Just put em on. :bigok:

i prolly will...

[Somnambulist]

Smart man.

I'm gonna be embarassed with my POS there compared to all the nice cars...

[Rick-95ZE]

I am so excited!!!!!!!!!!!!


That you just can't hide it?? :keke: Are you about to loose control??? And do you like it???

[Z33dori]

Smart man.

I'm gonna be embarassed with my POS there compared to all the nice cars...

well my car's appreance is in the hands of phase2motortrend...

depends on when i get those oil lines.... i might say F and throw the turbo on with the hardlines....

idk.. really don't want to go through the trouble of taking it back off again....

[Somnambulist]

That you just can't hide it?? :keke: Are you about to loose control??? And do you like it???

Uh. What? :ugh:

well my car's appreance is in the hands of phase2motortrend...

depends on when i get those oil lines.... i might say F and throw the turbo on with the hardlines....

idk.. really don't want to go through the trouble of taking it back off again....

Fuck it, throw it one with the hardlines.
It's worth it. :bigok:

[osus14]

well my car's appreance is in the hands of phase2motortrend...

depends on when i get those oil lines.... i might say F and throw the turbo on with the hardlines....

idk.. really don't want to go through the trouble of taking it back off again....

quit your wining and just do it!!! :P

Anyone Have ideas on a good top mount t3 manifold that is local?
I can think of forcefab, neukin and slowmo. But anyone have experience with neukin and forcefab manis?

[red s14]

here are some pics of the car took today and some of late. bad pics but o well. o and the car is dirty as hell. there will be to come.

fully built as stated in previous post in this thread. 2871r .64 tubo. full sus. apexi coil's, ALL rear links are battle version, tein tie rods, tanabe swaybars and strut bars.bride brix II's NOB nardi wheel, custom delete panal.

wheels are 18x9 with a 0 offset and 18x10 with a 0 offset. thanks -dan

ENJOY

APEXI TI EXHAUST AND SOME NEG. CAMBER
http://i134.photobucket.com/albums/q107/reds14/001-1.jpg
http://i134.photobucket.com/albums/q107/reds14/002-1.jpg
GOT LIP!!! 18X10 WITH A 0 OFFSET
http://i134.photobucket.com/albums/q107/reds14/003-1.jpg
BEFORE I PUT THEM ON
http://i134.photobucket.com/albums/q107/reds14/100_0340.jpg
http://i134.photobucket.com/albums/q107/reds14/100_0341.jpg
CHARGESPEED KIT PAINTED BY ME AND A FRIEND THEN LATER THE FRONT FENDER AND BUMBER WAS REDONE BY SOMEONE ELSE
http://i134.photobucket.com/albums/q107/reds14/007-1.jpg
http://i134.photobucket.com/albums/q107/reds14/008-1.jpg
THIS IS A REAL NARDI NOB TANAGUCI WHEEL OR HOWEVER YOU SPELL HIS NAME.APEXI GAUGE'S, TURBO TIMER, AND BOOST CONT.
http://i134.photobucket.com/albums/q107/reds14/004-1.jpg
INTERIOR IS ALL BRIDE. A BURBERRY SHIFT BOOT MADE BY S13SILVIA GIRL ON HERE, AND THE DELETE PANAL WAS ALL ME
http://i134.photobucket.com/albums/q107/reds14/005-1.jpg
CAGE WAS PAINTED BY ME TO MATCH THE WHEELS
http://i134.photobucket.com/albums/q107/reds14/006-1.jpg
ENGINE BAY-GARAGE DEFEND COOLING PANAL ALL CF,VALVE COVER PAINTED BY ME, INJECTOR WIRES ARE LENGHTEND AND RAN THREW THE RUNNINGS FOR A CLEANER LOOK
http://i134.photobucket.com/albums/q107/reds14/009-1.jpg

[Somnambulist]

I hate you.

I want your car.

If you don't wanna clean your car, bring it over here and I'll do it before Saturday. I have Thursday off...

[Altered_Image]

Sorry to get back to this, but here is a pic of my car before it was in Primer and the body work was finished. It was taken from the shop it was at on the East side of Cleveland.
http://www.aigraphix.com/images/nate_240SX001.bmp

Thanks guys!

[Altered_Image]

:eek2::bow::bow::bow::bow:

Well done! +1


here are some pics of the car took today and some of late. bad pics but o well. o and the car is dirty as hell. there will be to come.

fully built as stated in previous post in this thread. 2871r .64 tubo. full sus. apexi coil's, ALL rear links are battle version, tein tie rods, tanabe swaybars and strut bars.bride brix II's NOB nardi wheel, custom delete panal.

wheels are 18x9 with a 0 offset and 18x10 with a 0 offset. thanks -dan

ENJOY

APEXI TI EXHAUST AND SOME NEG. CAMBER
http://i134.photobucket.com/albums/q107/reds14/001-1.jpg
http://i134.photobucket.com/albums/q107/reds14/002-1.jpg
GOT LIP!!! 18X10 WITH A 0 OFFSET
http://i134.photobucket.com/albums/q107/reds14/003-1.jpg
BEFORE I PUT THEM ON
http://i134.photobucket.com/albums/q107/reds14/100_0340.jpg
http://i134.photobucket.com/albums/q107/reds14/100_0341.jpg
CHARGESPEED KIT PAINTED BY ME AND A FRIEND THEN LATER THE FRONT FENDER AND BUMBER WAS REDONE BY SOMEONE ELSE
http://i134.photobucket.com/albums/q107/reds14/007-1.jpg
http://i134.photobucket.com/albums/q107/reds14/008-1.jpg
THIS IS A REAL NARDI NOB TANAGUCI WHEEL OR HOWEVER YOU SPELL HIS NAME.APEXI GAUGE'S, TURBO TIMER, AND BOOST CONT.
http://i134.photobucket.com/albums/q107/reds14/004-1.jpg
INTERIOR IS ALL BRIDE. A BURBERRY SHIFT BOOT MADE BY S13SILVIA GIRL ON HERE, AND THE DELETE PANAL WAS ALL ME
http://i134.photobucket.com/albums/q107/reds14/005-1.jpg
CAGE WAS PAINTED BY ME TO MATCH THE WHEELS
http://i134.photobucket.com/albums/q107/reds14/006-1.jpg
ENGINE BAY-GARAGE DEFEND COOLING PANAL ALL CF,VALVE COVER PAINTED BY ME, INJECTOR WIRES ARE LENGHTEND AND RAN THREW THE RUNNINGS FOR A CLEANER LOOK
http://i134.photobucket.com/albums/q107/reds14/009-1.jpg

[Rick-95ZE]

here are some pics of the car took today and some of late. bad pics but o well. o and the car is dirty as hell. there will be to come.

fully built as stated in previous post in this thread. 2871r .64 tubo. full sus. apexi coil's, ALL rear links are battle version, tein tie rods, tanabe swaybars and strut bars.bride brix II's NOB nardi wheel, custom delete panal.

wheels are 18x9 with a 0 offset and 18x10 with a 0 offset. thanks -dan

ENJOY
http://i134.photobucket.com/albums/q107/reds14/007-1.jpg

APEXI TI EXHAUST AND SOME NEG. CAMBER]








It's about time DAN!!! Your car is the shit!!! and you better be coming to the meet on Saturday!:squint:

[Rick-95ZE]

If you don't wanna clean your car, bring it over here and I'll do it before Saturday. I have Thursday off...



You want to wash mine?:D

[Somnambulist]

You want to wash mine?:D

Haha. Hmm.. Bring it over? :bowdown:

[Z33dori]

BTW willing to trade those Apexi's i have for :

Powered By Max
Stance GR+( + money on your end)
Stance GR+ Pro straight up


so if you guys know anyone WTT/LTT/WTB my coils.... lmk plz

[slw240sx]

quit your wining and just do it!!! :P

Anyone Have ideas on a good top mount t3 manifold that is local?
I can think of forcefab, neukin and slowmo. But anyone have experience with neukin and forcefab manis?



I haven't built a nice manifold in a few months now, it would be a nice change of pace for me! haha all this rust repair,bodywork,rollcage, and sheet metal fab is making me suicidal. i want some good old turbo manifold fab work again.

here is a car that was intrusted to me last week for a turbo setup. its not a cheap car either.

FD rx7 with a Stroked out LS2 with a set of patriot heads and a Z06 cam sitting at 8.5:1 compression making 425 on partial tune NA. this week its now Turbocharged with a rear mount 78mm Turbo next week is the eta for the next dyno session. hoping for 700ish on low boost 800ish on mid/high boost.

http://i253.photobucket.com/albums/hh75/ForcedFabllc/LS2rx7frontcorner.jpg
http://i253.photobucket.com/albums/hh75/ForcedFabllc/rear.jpg
http://i253.photobucket.com/albums/hh75/ForcedFabllc/T78onweldingtable.jpg


Also Jdori I have a few oil feed lines here if you need one that bad. -3 ss braided hoses. we use them on almost all our cars here that we build.

[slw240sx]

BTW willing to trade those Apexi's i have for :

Powered By Max
Stance GR+( + money on your end)
Stance GR+ Pro straight up


so if you guys know anyone WTT/LTT/WTB my coils.... lmk plz

keep what you got, those are nice coils. try them out you might just like them.

Jon

[Z33dori]

keep what you got, those are nice coils. try them out you might just like them.

Jon


i already bought the lines... but i haven't gotten a tracking number... so i doubt my car will be at the meet... also i remembered that i need a new water pump.


and if they don't sell by the end of next week they will be going on my car....


btw: VIDS OF THE RX7 OR GTFO..... that is one of my dream machines..... hells just about any LSX car is lol... im such a v8 whore

[red s14]

I hate you.

I want your car.

If you don't wanna clean your car, bring it over here and I'll do it before Saturday. I have Thursday off...

jeff wash it before i go to edgewater on friday lol. i don't think i'm going to the meet on thursday cause i'm going to ewater on friday then the zilvia meet on saturday.

:eek2::bow::bow::bow::bow:

Well done! +1

thank you sir. i might have some nice parts but my car is just another 240 and no better then anyone else's car!!!

[osus14]

and if they don't sell by the end of next week they will be going on my car....



Just put them on :) I think you will like them. If not it only takes like 45 mins to take them off.

[SinisterSntra91]

I dont think Ill make it, I got some welding to do cause I just got some big parts to my big ass puzzle in, plus I got to move some things into the shop, and I got to burn some old furniture out behind the shop, so.... bon fire! Hey your all welcome to swing by drink some beer and burn some stuff lol. Just think of it as the after party....

[Z33dori]

Just put them on :) I think you will like them. If not it only takes like 45 mins to take them off.

iknow.... i've done a good handful of coilover jobs

[red s14]

+1 for apexi coils j dori try em out man i think you would like em. GL

[Z33dori]

i prolly will just end up putting them on


but some good news.... sold my blown t25 already... looks like i might be trading a Z32 maf for greddy turbo timer...

and still no tracking number from Phase2.... :(

[Somnambulist]

jeff wash it before i go to edgewater on friday lol. i don't think i'm going to the meet on thursday cause i'm going to ewater on friday then the zilvia meet on saturday.



thank you sir. i might have some nice parts but my car is just another 240 and no better then anyone else's car!!!

Well now the weather is fucking shitty..

I hate rain. :rl:

[Somnambulist]

I dont think Ill make it, I got some welding to do cause I just got some big parts to my big ass puzzle in, plus I got to move some things into the shop, and I got to burn some old furniture out behind the shop, so.... bon fire! Hey your all welcome to swing by drink some beer and burn some stuff lol. Just think of it as the after party....

Aw. :-/

That sucks. You should come anyways.

[SinisterSntra91]

Aw. :-/

That sucks. You should come anyways.

Lol I just realized I posted this in the roll call thread instead of the ohio zilvian meet thread...

<---------This guy = fail

[Somnambulist]

Lol I just realized I posted this in the roll call thread instead of the ohio zilvian meet thread...

<---------This guy = fail

Haha it's whatever. We use these two threads as sort of a general chat for the OH/NKY guys.

[Rick-95ZE]

:duh::duh::duh::duh:

[Z33dori]

mmm looks like i will be going tial bov.... yay


Jon... if you see this pm or call me.....
229-460-6044

-JC.... ineed one ASAP... prolly call u when i wake up

[osus14]

mmm looks like i will be going tial bov.... yay


Jon... if you see this pm or call me.....
229-460-6044

-JC.... ineed one ASAP... prolly call u when i wake up

yeah, i forgot Jon had a nice tial BOV for sale. But to run that 50mm tial you need to get a bigger turbo.. (hint hint, that gt2871r i have is calling your name)

[Z33dori]

to bad.... running a 50mm with t25...

i might be getting a gt28 l8tr this year tho... unless i buy some wheels and 5 lug

[Z33dori]

okay another change....

anyone have spare S14 T28

willing to trade a good t25 and +cash(200 or so)

need it ASAP....

[osus14]

to bad.... running a 50mm with t25...

i might be getting a gt28 l8tr this year tho... unless i buy some wheels and 5 lug

The ebay SSQV bov works great. Well I had some troubles with the O ring that came with the kit. It was cheaply made and didn't give a good seal. So i had to take the O ring from my Real Hks SSQV and used it. Now you can't tell the difference :). But i gotta order another O ring from HKS, i wonder how much that will run.

[Z33dori]

well thats good to hear......

[slw240]

im eric i have a 92 240sx rb20det swapped needs wired

[osus14]

Fucking AY!! I move into a nice are, into a nice condo. ANd my wrx gets boken into. All the neighbors were suprised because stuff like this never happens here. I hate theives....

[Z33dori]

dam thats shitty

btw do you guys have like myspace pages or w/e

that way we can add a face to the name... so next meet we will know who to look for

[Somnambulist]

MySpace.com - &spades; Jeff &spades; - 19 - Male - Mason, Ohio - www.myspace.com/arsenal7gunners14 (http://www.myspace.com/arsenal7gunners14)

[Z33dori]

www.myspace.com/Zilvia

[slw240]

anyone wanna buy a hks ssqv bov

[Z33dori]

yes.....

how much and how fast can you get it shipped out

i have pay pal ready... and i don't need the flange

[Leetheslacker]

anybody have some dohc lines or a s13 dohc p/s pump laying around they wanna sell?

[SinisterSntra91]

myspace.com/brenbeck (http://www.myspace.com/brenbeck)

[osus14]

I got facebook :)

[Z33dori]

so i think i have my coilovers sold.... will find out friday

still nothing on a bov.. was talking to a guy on Ohiodrifting... but he seems to be taking his time finding out the shipping on it.....

......

[Somnambulist]

I got facebook :)

http://www.new.facebook.com/profile.php?id=1423830348

[Z33dori]

so what has everyone been up to...

this thread has been dead since the meet.

i'm still trying to get my car running. Having trouble getting a stud out of my head on the exhaust side... so i can put my new one in and put my manifold on...

[Somnambulist]

We should make an Ohio Zilvians Off Topic Thread...

I'm not sure if it's allowed though.. I PM'd thatguy last night asking about it but haven't heard back...

[Altered_Image]

[quote=Z33dori;2305388]so what has everyone been up to...

this thread has been dead since the meet.
quote]

I wish I couldn't made it to the meet. I am hoping for a new position where I work that I interviewed for last week. It would require frequent travel to both Cinci and Columbus from up here in "The Cleve".

[Somnambulist]

[quote=Z33dori;2305388]so what has everyone been up to...

this thread has been dead since the meet.
quote]

I wish I couldn't made it to the meet. I am hoping for a new position where I work that I interviewed for last week. It would require frequent travel to both Cinci and Columbus from up here in "The Cleve".

Woot woot. Sounds like a good job.