my R14

[rbs14kouki]

it all started 1 year ago ... it's a recap of my built .

here is my project :
chassis:
- Tien super drift coilover
- GReddy strut bars front and rear
- Wheels Gullflame 18x8.5(fr)18x9.5(rr)
- BFGoodrich g-Force T/A KDW 2
- Suspension tech. sway bars fr and rr
- Tien tension rod
- Tien tie rod
- z32 brake conversion (30mm)
- Brembo slotted front and rear rotors
- PROJECT MU B-Force z32 Front Brake Pads
- PROJECT MU B-Force S13/S14 Rear Brake Pads
- 5 lug conversion
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3194.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3195.jpg




engine :rb26dett aka Godzilla
- R-33 rb26dett
- JE piston (87mm) stock rod and crankshaft(balance)
- GReddy clear valve cover
- GReddy cam gears
- GReddy timing belt
- GReddy Racing Ti-C Catback
- GReddy intake plenum
- GReddy ASP
- GReddy ka24 rad
- McKinney Motorsports RB26DETT Engine/Transmission Mount
- TOMEI S14 SR20DET Upgrade Fuel Pump
- SARD Adjustable Fuel Pressure Regulator
- new timing belt tensioner and idler
- nissan rebuild gasket kit
- ARP head and main stud
- N1 water pump and oil pump
- Apexi power-FC et power-FC boost controler (pas encore commendé)
- stock oil pan modifié
- Nismo thermostat


http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3133.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3141.jpg



drivetrain:
- rb25 trany
- ORC twin plates clutch
- McKinney Motorsports Custom Drive Shaft for S14 95- 98 240SX
- Nismo slave cylinder
- LSD tomei or kazz to come
- GReddy diff cover


http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3135.jpg


------------------------------------------------------------------------------------------------

here is my car with my mags on .
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3340.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3338.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3337.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3343-1.jpg
rear tire with out the roll .
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3341.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3342.jpg

----------------------------------------------------------------------------------------------

pics of my fenders geting rolled
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3344.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3346.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3345.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0119.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0118.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0117.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0116.jpg

----------------------------------------------------------------------------------------------

KA is out and preping for the RB
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3372.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3373.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/HPIM3374.jpg

----------------------------------------------------------------------------------------------

with the motor mounts in
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0172.jpg

----------------------------------------------------------------------------------------------

engine pics :
piston assembly :
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0210.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0209.jpg
crank :
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0207.jpg
hold pistons (86.5 N1 piston) for sale btw:
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0205.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0203.jpg
hold bearings :
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0202.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0201.jpg
and the block :
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0212.jpg

my oil pan is cap and ready for my RB26rwd
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0229.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0228.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0227.jpg

----------------------------------------------------------------------------------------------

me working on the beast (puting my last piston in)
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0326.jpg
final look at the bottom end
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0332.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0333.jpg
put the head ont the block whit my tomei head gasket ... and started to putt back the intake side .
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0351.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0350.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0339.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0340.jpg
the cams are on
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0355.jpg

sorry for the poor pictures it with my cellphone
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0356.jpg

here is a pic of the hot side of the RB ...
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0371.jpg
and intake side pretty mutch finish ...
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0370.jpg
just need to powder coat the head black or gold ... and it`s a done deal ... just need to put all the vacum hoses back on . :naughtydance:

----------------------------------------------------------------------------------------------

my valve covers are back from the powder coat ...
sorry for the bad picture it`s with my cell phone!!!
they are top notch and only cost me 120$
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0385.jpg

[Slammed180]

Picture thread!
But looks promising.

[Suk02Si]

Cool build, but I was expecting to finally see someone that went through with the Full Race R14 setup.

[rbs14kouki]

Cool build, but I was expecting to finally see someone that went through with the Full Race R14 setup.

yeah i wish i had a 4wd s14 ... but my rwd set-up will do the job ... :boink:

[rbs14kouki]

Cool build, but I was expecting to finally see someone that went through with the Full Race R14 setup.

i know , it all started a year ago ... and i wanted to post my built on the forum ... if anybody have question on my built ... just ask !!!

[GSXRJJordan]

Yeah I was thinking R14 = RB26 w/AWD, like the Full Race kit.

Still a beast buildup.

[rbs14kouki]

ok here`s a little update on my RB (HKS super suction kit)
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0375.jpg

Tomei fuel pump is in the tank ...
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0446.jpg
and the engine is now next to my car ... going in Friday
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0454.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0453.jpg

i worked on the car today ... wanted to test fit the engine in de engine bay before puting my tranny on .
found out that my new turbo helbos were the same , that are for the front turbo , the back helbow was rubing ont the fire wall and didn`t fit ... so i went back with the stock one ...
and like 30 min after i finish pituing back everything it started snoiwng/raining ... had to put everything back inside the garage ... tabarnak ...lol
pics of today :
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0464.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0463.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0462.jpg

i had trouble with the rubber motor mount so i switch them for some hockey puck ... the one mckainney motorsports gave me were not thick enought ... and my front sway bar doest fit anymore ... but for the rest evrerything is good ...
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0485.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0484.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0483.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0482.jpg
if some of you guys want to do a simular swap ... i can duplicate my motor mounts ... i have all the mesurement
sorry for my bad english :duh:

on its way to the garage :
http://i202.photobucket.com/albums/aa74/rbs14kouki/towing.jpg
over at autoworx:
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0548.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0563.jpg
i got all my parts for my set-up to run ...
PFC :
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0561.jpg
Sard 800cc
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0572.jpg
the only problem is that the connetors that were with the injectors are not the good ones .
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0593.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0592.jpg
and my last parts for now is a Turbosmart MEGASONIC BOV :
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0597.jpg

and here is the car right now

last update the car is back from the garage ... intercooler is on ... downpipe to , just need to plug my Power-fd d-Jetro , boost controler and couple more things !!!
i should be runing next week !!!

here are the pics :
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0613.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0611.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0607.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0612.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0610.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0609.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0608.jpg

[gunluvS14]

lovely.
You got my hope up, I thought u are talking about the full blown AWD R14

[bboyoracle]

^^^^^Same here :(

[exitspeed]

Note to other members:

THIS is a build thread.

nice work.

[Full-Lock]

like ive said to you before excellent build!
the motor is so clean and looks perfect in the bay.

you did an awesome job with everything
love it!!

[rps13drift]

It looks beautiful dude! Please takes vids of that beast running!

[IIIXziuR]

It looks beautiful dude! Please takes vids of that beast running!

Mikey likes it, he really likes it!

[rbs14kouki]

sorry for the confusion guys ... if i could , i would change the tittle !!!

thanks for the comments

the car will be runing next week and i have a tuning session on the 18 of june for my break in , just to be safe !!!

[ROUGE180]

Wow.. so did you do the majority of the work yourself or did you have others helping you? The car is clean and I've always like the Gullflames. All the products you used are top notch. Don't worry about the cell phone pics. Actually good quality lol. Well, GL with the build and look forward to seeing a vid when you finish everything.

[MikeisNissan]

I am so jealous! Good shit man.

[luckysr]

Ooo Man Wish I Can Throw An Rb26 In ......lucky........

[a_ahmed]

Man when I read the title I thought full race's R14 skyline conversion (suspension and all), I was like woah a zilvian with one. But I guess not lol..

[Fries]

Whoa Kouki with no bumper + huge interfooler! I LOVE IT!

RB26 is the sex. Good job.

[GSXRJJordan]

The RB26 was in the bay for those pics.

RB26 != interfooler.

[Justin Bernstein]

Could you tell me how much you have spent so far? has to be over 12,000$ us dollars?

[punkrico]

it looks great!!! what turbos r those? What did you use to plug the oil pan?

[rbs14kouki]

Wow.. so did you do the majority of the work yourself or did you have others helping you? The car is clean and I've always like the Gullflames. All the products you used are top notch. Don't worry about the cell phone pics. Actually good quality lol. Well, GL with the build and look forward to seeing a vid when you finish everything.

my block was bored and honed by a shop ... and the intercooler piping and downpipe was made by a other shop around my place ... the rest is all me !!!

Could you tell me how much you have spent so far? has to be over 12,000$ us dollars?

if i count the car(9000 can$$$)+all my mods , i'm up to around 32000 can.$$$ ... i know it's alot , but i still live at home and i have a realy good job ... so i can aford it !!!

i still need a diff for this summer and a new turbo set-up for next summer (gt2530's)

[rbs14kouki]

it looks great!!! what turbos r those? What did you use to plug the oil pan?

stock turbo's for now and for the oil pan i use a aluminium bar tha i had cut to the good lenght and welded it in the hole !!!

[xplicit240]

wow. someone loves greddy =) nice build making me very jealous

[dookiedang]

where did you splice your harness? is everything electronically working? (ac,radio,wipers, etc.) lmk thanks.

[rbs14kouki]

wow. someone loves greddy =) nice build making me very jealous

yeah i had great deal on the greddy parts that are on my car ... intercooler was only 600 compare to the 1600 usd$$new
http://www.rhdjapan.com/jdm/Trust-GReddy-Spec-R-HG-FMIC-Intercooler-Kit-BNR32-BCNR33-Skyline-Twin-Entry-Type-23-Core-52208

- the intake manifold was from a guy on gtrcanada.com for haft price , around 500 ...

- rad , i realy liked the plug on the top tank for a sensor or a fiting for my cooling system

- clear cam cover came as a kit ... cover/cam gears/timing belt (ebay) cheap

the other parts are from us shop like 240sxmotoring and phase2.

[rbs14kouki]

where did you splice your harness? is everything electronically working? (ac,radio,wipers, etc.) lmk thanks.

i didn't do my harness ... it was a guy here in montreal that made it ... evrething is going to work + he pass the wires for my power-fc d-jetro and boost controler in the arness to have a clean look ... cost me 500 $

i can't answer your question :doh:

[97KATURBOSILVIA]

HAHAHA very nice build :hitit: , +1 for doing while living w/ parents im gonna go ahead and say this is your down payment investment for a house. Keep going and lets see vids of start up and such:coold:

[Meng1988]

Dang 21 and have that money. I am 19 and still live at home, but no way can I get an RB. I'll be lucky with an SR in the far future. I want your job.

[[w]hite[r]abbit[x]]

Very nice S14! I like how your wingless. That is sleeper. Congrats on an awesome build. If i win the lotto i'll do exactly what your doing. RB26 FTW!

[Modrified]

mmm godzilla. keep it up mang. initially i thought u meant the fullrace, but great nonetheless.

[samsx]

j'aime ton char! J'espere que tu vas pas aller planter ca dans un mur a st-eustache! Fais comme moi, fais du time-attack!

[wrapmeup2005]

Nice build man, Im sure that you found hockey pucks easier than you would down here ;) Good luck with the rest!

[rbs14kouki]

Dang 21 and have that money. I am 19 and still live at home, but no way can I get an RB. I'll be lucky with an SR in the far future. I want your job.

thanks CPRail for chosing me , that's all i got to say

[rbs14kouki]

j'aime ton char! J'espere que tu vas pas aller planter ca dans un mur a st-eustache! Fais comme moi, fais du time-attack!

i'll speak in english for this one ... yeah for shure i will do Time Attack like last year when my car was bone stock but i want to try the drifting to

Nice build man, Im sure that you found hockey pucks easier than you would down here ;) Good luck with the rest!

the capital of hockey ... i got a bucket foul of hockey puck at my home ... haha

[OfourTHREEfive]

Awsome build and thank you for speaking english.

What do you do for a living if you dont mind me asking?

[iwishiwas-all*]

yea mannn where is the awd we all thought u had lol

[rbs14kouki]

Awsome build and thank you for speaking english.

What do you do for a living if you dont mind me asking?

working for CPrail ... train conductors

[Nachtmensch]

yea mannn where is the awd we all thought u had lol
seriously... :ugh:

[FaLKoN240]

God damn!

I subscribed...

[rbs14kouki]

just finish the break in !!! 1000 miles

i will go back on the dyno (july 29) fora real tune (12/13psi) only at 7psi right now ...

here is some pics of the car finish !!! i had to cut my bumper to fit that big ass intercooler !!!

http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0636.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0637.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0639.jpg
http://i202.photobucket.com/albums/aa74/rbs14kouki/SSPX0638.jpg

next thing is a oil cooler and a diff ...

[Ceepo]

This car is sehcs on wheels!!! really, good job that looks clean and done right... +1

[ROIDMONKEY]

Nice Install love the RB26, need better wheels tho. those wheels doesnt match that RB :).

[NRogge]

very nice build man. love the rb26
get some vids :]

[LA_phantom_240]

Jesus! So clean!

[fbiphil]

That is one of the cleanest installs I've seen- beautiful!!
Keep us posted with the numbers after the dyno tune- I'm sure we'll all be even MORE jealous!
Great work.

[s13 @ fullboost]

Super clean +1 =]

[KansaiDrifter]

i think your wheels are nice. I like the bent spoke design, and very clean install props.

[junn]

sick man!!!!!....only have one question.... did you only use the fender rolling tool to get your rear quarter pannel fender like that?

[Tenchuu]

This is a DAMN good build thread. sick job man.

[heyitzalan]

damn, baller ass build, i see expensive parts such as greddy radiator. this guy is baller. PROPS!!!

[HunsakerS14]

nice build man.
its so clean omg!!
cant wait to see vids or dyno numbers.
either ones gonna make me blow in my pants.
thank you

[soreballz]

Please, for the love of god, get rid of those piece of shit foam filters.


Aside from that... Good job. Get a front lip + moar lower = sex.

[opponheimer]

That FMIC and front bumper dont go together too well... can you get a lip to go under the intercooler? Looks good, i like the fender pull and wheel combo, very neat.

[RUTH'LESSDET]

im in love:love:
sick build

[LowNismo17]

i am so glad you painted that engine bay..

[wannabe_drifter]

Great build up !
Need a vid of it at WOT !

You should come at ste-croix drift days there are pretty much no walls you can hit, and lots of track time.

Edit: the wall behind my car in my sig is only on the straight line :P

[rightcoastimports]

very nice work.. just need a new front bumper and some deep dish

[holemilk00]

Really nice build man, props for doing all you could yourself. Always love the silver moss cars.

[Dominic Axelson]

love it.......

[UsJdmTUner]

car is insane.. love the silver moss kouki especially rb26... man love the deep and low tone...def a beast...

[allntrlundrgrnd]

beautiful work my man.

any plans for aero? jdm front would be very sexy/ keep it clean

[Darius]

Nice clean swap, but what is with the fender roll job? Did you do it or have a friend do it for you? I've seen better results with a baseball bat.

[tougestyle]

p-o your car is great but i need a ride now :D

[s13 @ fullboost]

Post Video please!!!! I check this thread once a day for updates really would like to see some footage of the car please and thank you =]