Kouki Tail Lights

[thaying]

Ok, i bought these 180sx Kouki's off a guy around my area and it came with no bulbs or the bulb holder. I was wondering if anyone would know the part numbers for the sockets if there are any because I'm fairly new with cars especially finding out what sockets are required for these lamps. I already searched but I came up with nothing. So, I need the following:

Left and Right taillight: all three sockets; two brake and 1 turn signal (total of 6)

Center: 2 sockets

Any help would be great. Thanks.

[Sileighty_85]

I had the same problem, Couldnt find a solution here so when I went back to Okinawa to get married I ordered the acutal one, I can give ya the part #'s but not sure if that will be any help

Socket Assy-RR 26556-60F00
Socket Assy-RR 26551-60F00

You'll need Two of Each one is for the outer light, the other is for the inner light, cannot remeber which is which.

As for the Reverse Light I THINK you can use the 240's Sockets?? I cant remember what I used, I had a bag of MISC light sockets mine might have been in there.

But if ya need a temp fix Auto Zone sells these Universal Sockets that will work but ya have to use small bulbs, and you cant really wire them correctly, you'd only get to use two for brake light and two for running lights, instead of using all 4 for both

Hope this helps

[thaying]

well, if a temp is what i can get then that's probably what i'll get, cuz the sockets are also "modified" a little bit. I want some opinion though before i do anything.