soo this has nothing to do with 240s....

[bokboked]

so i heard there are some rx7 enthusiast on here sooo why not

I just took off my upper intake manifold and reinstalled it and now my car wont start its an 86 na. The lights, radio, etc. go on but there are no sparks and the fuel pump doesnt seem to turn on... soo ive come to you guys for some help maybe?

Thanks!

[90hatchie]

did you pull any fuses before working on car?
did you unplug anything while working on car?
double check everything

[bokboked]

yea i double checked everything but i'll do it again tommorrow =/ unplugged a lot of things that go onto the manifold but everything was accounted for. so i really have no idea:confused:

[!Zar!]

Check your Maf.

It might be bad.

Unplug it and try starting it.

One of the joys with an FC and their wonderful wiring scheme.

[ILoveMyRHS13]

Ask an RX7 forum?

[bokboked]

rx7 forums arent very helpful at least the ones ive been to they just say search

[SHIFT_*grind*]

they just say search

Heh, you must not be familiar with Zilvia at all. :p

[just1pepsi]

If no spark, I'd check the related components. coil/coil pack/distributer (whatever it has) wiring (grounds, power wires, plug wire(s), Fuses.) I guess those have obd1, so check for an engine light or diag code (however thats done on that vehicle.)

[!Zar!]

I'm pretty sure it's the maf.

haha.

Rx7's are retarded like that.

I've experienced a similar problem with an fc.

[ThatGuy]

So rather than taking the time to Search an RX7 forum, where there is most likely an answer...

You're hoping someone on a Nissan S and Z-chassis forum can GIVE you the answer.

Laziness is interesting.

[Mi Beardo es Loco]

it might be the wiring going into the maf. a lot of time when you're messing with old wiring the wiring comes out of the connector