turn signal relay question

[sl0westz]

hey guys, my97 240sx turn signal and flasher both not working, im pretty sure its the flasher relay i went to the fuse box by driver side seat i saw 1 row of 4 relays from top to bottom 3 on top is blue one on buttom is brown, which one is the flasher relay? thanks

[projectRDM]

The flasher is hanging off a bracket by the SECU, near the steering column.

[makulit054]

check your fuses.

[driftpolice]

i have this same question. i checked my fuses and they look good.

[Mister.E]

mine used to freeze in the "on" position. turned out it was the relay. as already stated, i would check it out

[blue rexsti]

on a side question - not trying to jack it but since we are on blinkers and i can't seem to find my answer anywhere, which color wire is the flashing function and which is the stationary parking one? I have an s13 just trying to wire my 180sx blinkers. Thanks

[driftpolice]

is the relay in question the yellow one that says tjr?

[Mister.E]

mine was black

[projectRDM]

is the relay in question the yellow one that says tjr?

It's black. I've never seen a yellow relay anywhere in any Nissan vehicle.

[driftpolice]

yeah beleive there is a yellow box next to the relay however. any idea what that controls?

[S14DB]

Yellow one is the door chime not a relay.

Also, check your hazard flasher switch. I found out the hard way that you need this installed to use your turn signals.

[nothix]

My S13 had a fast blinker, turned out to be a wire that fell out of the plug in the front.
Fixed the plug and it worked perfect for inspection.

Now it seems that the same bulb is burnt =(

[KoolAidMan687]

did anyone ever have a fix to this? my 96 turn signals wont work but the flashers work just fine, fuse is fine

[KoolAidMan687]

yeah all my fuses are fine too

[soryu]

same problem happened today blinkers didn't work but flashers did.
but now their both working.

[Kriskouki]

Flasher relay is located underneath the steering column.....It attaches to the dash bar.....Flasher relay is the one that control the tempo of the turn signal/hazard lights by using/reading resistance of the bulbs.....It means that if one of the turn signal bulbs went out, the tempo will change (faster).....

According to your problem, if both turn signal and hazard lights are not working, I guess it might be the problem of either the fuse or the flasher relay itself........I would suggest you to go through FSM. Firstly, check the fuses.....Then, if needed, try to find "a working" flasher relay handy......You might want to give it a try replacing it to see if the problem is solved.....

Let me know if this helps