Propaganda
05-30-2008, 04:16 PM
I'm about to order some lines and I was wondering if I am able to remove the banjo fitting from the turbo lines that are being sold right now. If so, do you guys know what size it is? I am thinking it is -3AN, but I need to be sure. I think a good way to find out is the remove the oil feed line's fittings at the end and see if they interchange. I asked Vu at FRSport about this and to try my way of seeing if it worked and he didn't really give me a good answer or try my way of testing :(.
The reason I ask this is because I stripped the oil feed line's thread on the block and am planning to weld an aluminum weld fitting on the block. I think I'm going to weld an AN fitting for the coolant feed to the block as well just for good measure. What size is the fitting on the line? -6AN?
Also, if I remove the banjo fitting, would I need to run a restrictor or do the CS and Taka Motorsports line come with restrictors or are the restrictors in the banjo fitting
I tried emailing and PMing Harp at TakaMotorsports, but he hasn't replied.
The reason I ask this is because I stripped the oil feed line's thread on the block and am planning to weld an aluminum weld fitting on the block. I think I'm going to weld an AN fitting for the coolant feed to the block as well just for good measure. What size is the fitting on the line? -6AN?
Also, if I remove the banjo fitting, would I need to run a restrictor or do the CS and Taka Motorsports line come with restrictors or are the restrictors in the banjo fitting
I tried emailing and PMing Harp at TakaMotorsports, but he hasn't replied.