86301s13
05-30-2008, 01:27 AM
my car:
95 240sx ka24de
t28
370cc
3" dp all the way to muffler
safc
boost controller
hacked maf.
when i go to the sensor check while maf is hooked up to the safc, the volts on the in 2 is like 0.015~.020 and the in 1 is about .5 volts. with the safc wired in between the maf wire shouldn't the voltage read something almost equivalent? what is going in? the in and out is at 2 n 2. and 1 and 1 for the correction.
for the (in 2) in sensor check what voltage is being detected?
also with the maf not wired to the safc but direct to the ecu, the safc reads 100% afl is that right?
the sensor type is hotwire and the other setting is at 4 and arrow pointing up.
95 240sx ka24de
t28
370cc
3" dp all the way to muffler
safc
boost controller
hacked maf.
when i go to the sensor check while maf is hooked up to the safc, the volts on the in 2 is like 0.015~.020 and the in 1 is about .5 volts. with the safc wired in between the maf wire shouldn't the voltage read something almost equivalent? what is going in? the in and out is at 2 n 2. and 1 and 1 for the correction.
for the (in 2) in sensor check what voltage is being detected?
also with the maf not wired to the safc but direct to the ecu, the safc reads 100% afl is that right?
the sensor type is hotwire and the other setting is at 4 and arrow pointing up.