Options13
05-29-2008, 09:41 PM
how similar is the wiring between the s13 and s14?there are detailed wiring guides for the s14 ..but not the s13 .. :S
and also, i decided not to buy they m/t bellhousing bolts on ebay, but i found out the thread size which is M10 X 1.5 thread/pitch, so i got that down so i don't have to worry about stripping the engine, also the nuts and washers i need to get, would i be able to use the same ones off my a/t?? or should i get new nuts / washers?... it would be easiest if i could just use my a/t nuts / washers.. but let me know!
Bolts = 08131-0601A / 60mm length / 4 needed
Washers = 08915-2401A / 4 needed
Bolt = 08131-0701A / 70mm length / 1 needed
Washer = 08915-2401A
Bolts = 08124-0301F / 35mm / 2 needed
Nuts = 08911-2401A / 2 needed
Bolt = 08124-0601F / 65mm / 1 needed
Nut = 09811-2401A / 1 needed
Bolt = 08071-0251A / 25mm / 1 needed
Starter Bolts = 01121-03751 / 95mm / 2 needed
and also, i decided not to buy they m/t bellhousing bolts on ebay, but i found out the thread size which is M10 X 1.5 thread/pitch, so i got that down so i don't have to worry about stripping the engine, also the nuts and washers i need to get, would i be able to use the same ones off my a/t?? or should i get new nuts / washers?... it would be easiest if i could just use my a/t nuts / washers.. but let me know!
Bolts = 08131-0601A / 60mm length / 4 needed
Washers = 08915-2401A / 4 needed
Bolt = 08131-0701A / 70mm length / 1 needed
Washer = 08915-2401A
Bolts = 08124-0301F / 35mm / 2 needed
Nuts = 08911-2401A / 2 needed
Bolt = 08124-0601F / 65mm / 1 needed
Nut = 09811-2401A / 1 needed
Bolt = 08071-0251A / 25mm / 1 needed
Starter Bolts = 01121-03751 / 95mm / 2 needed