auto tps on manual harness questions.

[noname7198]

I have a 6 wire auto TPS on my red top sr. I have a manual harness with a 3 wire brown connector. My searching says I can use my KA plug. I have a grey ka 3 wire plug that does not mate with the brown 3 wire plug on my sr harness. So, I'm going to just wire it straight without the connector. Now the wires: the harness has green/red (ecu signal), white (power) and black (ground). The tps has 6 wires: red, white, green, black, yellow, and blue. Here are my questions:

1. I connect the black to black and white to white, correct?
2. Which wire on the TPS is the signal wire for the ECU?