Need a Answer ASAP. PLEASE!

[Drift N Dragg]

Ok, I got alot of help aready and it was Appreciated.. But I have one last Thing. My Speedo on my Cluster is NOT working. I ran a Direct Line from my VSS to the Speedo.. nothing. I swapped out the VSS already with my KA one. and I was given a S14 lower Harness.. told it was the same. BUT no where to connect my VSS line. I need this thing showing MPH by 5 am since this is my DD.. please help! Also it is a RB20DET

[burnsauto]

also guys, its an s13 chassis. ;)

[Drift N Dragg]

Ah thanks forgot to mention that !!!

[slider2828]

See if you are getting signal. Stick a volt meter on it and run the rear tire on jack stands. See if you are getting any voltage from it. The VSS can break as well.

[blueshark123]

u dont need to know how fast ure goin to drive it but is ur gauge cluster even workin?

[Drift N Dragg]

Well I drive 180 miles round trip to work and back.. would be nice to know how fast I am going.. The Cluster worked. It worked when I did the swap. Just not working for this Engine.. I will try the voltage thingy.. thanks

[jinesz32]

eh it would be nice, but if you got some friends, just line up with them, and be on the phone with them and check your rpms to see how fast your going, i dont want to buy a speed sensor for my car so my mph hasn't been working for the longest time now, ever since the 5 speed swap, i pretty much know how fast im going by just looking at the rpm now ;)

[fliprayzin240sx]

Need more info...what year S13, what VSS sensor are you using...etc...

[Drift N Dragg]

Its a 1991 Coupe..I am Using the VSS out of my KA24DE 5 Speed Tranny... . I am currently running a RB20DET w/ RB20 5 Speed Tranny... .