S14 5 lug for S13 -searched error

[surge s14]

some help plz
i need the info for sunday

can i get everything i need for a s14 5 lug chassy to complete my conversion for my s13?

so im new to this whole 5 lug stuff and yes i searched but i keeped loading done wouldnt show nothing but white screen :ugh:

much appreciated
thanks -surge

[LongGrain]

yes you need s14 spindles, hubs, and ball joints in front, and just s14 hubs in back

of course you'll also need brake rotors and wheels/tires

[98s14inaz]

yes you need s14 spindles, hubs, and ball joints in front, and just s14 hubs in back

of course you'll also need brake rotors and wheels/tires

Might as well snag the flca's too while you are at it. It gives you a wider stance in the front.

[MaD1337M3DRiV3r]

i used the s14 rear hubs and bought the peak performance conversion hubs for the front. Makes things a lot less complicated.

[surge s14]

yes you need s14 spindles, hubs, and ball joints in front, and just s14 hubs in back

of course you'll also need brake rotors and wheels/tires


spindles is also what they refer to as knuckles right?

if they are i need just the front

[thejapino]

spindles is also what they refer to as knuckles right?

if they are i need just the front

Yes, just unbolt the s14 lca at the crossmember, disconnect the strut from the spindle, disconnect the tension rod and sway endlink, remove caliper (or cut the brake hose - whatever), and remove everything in one piece so you won't have to pickle fork anything (besides tierod).

[ManoNegra]

You'll also need to either make sleeves to keep using your S13 strut bolts or drill your shocks to take the S14 strut bolts.

[projectRDM]

Or use S14 struts.

[98s14inaz]

Or use S14 struts.

Does that actually work? I did not know that.

[projectRDM]

Does that actually work? I did not know that.

Works fine. They're identical besides the lower mounting holes. The load ratings and valving are a bit different on OE parts, but anything aftermarket is tuned for performance anyway.

[mrmephistopheles]

Does that actually work? I did not know that.

It works.

[DALAZ_68]

what about putting s14 oem 5 lug hubs...on an s14 front that had originally 4 lug front? :wiggle:

[civilized_drifter]

what about putting s14 oem 5 lug hubs...on an s14 front that had originally 4 lug front? :wiggle:
im pretty shure that would work:keke:

[mrmephistopheles]

what about putting s14 oem 5 lug hubs...on an s14 front that had originally 4 lug front? :wiggle:

OEM Nissan S14 5 lug hubs on an OEM Nissan S14 Spindle?

I think it's just so crazy it might work!





:keke:

[burnsauto]

OEM Nissan S14 5 lug hubs on an OEM Nissan S14 Spindle?

I think it's just so crazy it might work!





:keke:

smartass... lol.

yeah for non se s14's, a five lug conversion is really basic. Just need oem five lug hubs and your done. much like aftermarket s13 conversion hubs.

[projectRDM]

what about putting s14 oem 5 lug hubs...on an s14 front that had originally 4 lug front? :wiggle:

Come on man, are you being serious?