Turbo Timer Nightmare HELP!

[corey240]

Ok so i installed my turbo timer harness and greddy timer. So the car shut off, like it should. Then i turned the key to leave and it didnt turn anything on. Then i noticed the acc. and on will not work at all. I multimeterd that badboy of the key cylinder and theres no reading at all with any setting. What up? Fuses are all good, the battery is good. But...


I tryed to hardwire at first and that didnt work for some stupid reason and the thick white wire from the harness that runs into the dash was particaly stripped and i think it may have touched metal = problem. This is an s14 kouki and a greddy turbo timer with apexi harness (which makes no difference just specifing). I need help asap gota work tomorow thatnks fellas/ladies.

[brndck]

you've checked all the underhood fuses also? not just the under dash ones? if the ign pwr wire was exposed and shorted to ground you may have blown that system fuse. get a test light or preferably a power probe and trace it.
just my .02

[slider2828]

Lol.... that white wire with red stripe is a constant 12V.... Check all the fuses under the hood and all the fuses under the driver side kick panel...You definitely shorted something good luck.

[projectRDM]

You blew a fusible link on that one, the ignition switch is high current.

[slider2828]

I would hope he did, when I blew my FLA-ALT fusible link, it also friend my ecu... Don't mess with exposed wires under that iggy hahaha...